Share:
Specifications
SKU: CUSTOM Waterproof ORP/pH meter PH-6600
Product overview
![[Measurement item] pH](https://www.kk-custom.co.jp/function/function_pH.svg "[Measurement item] pH")
![[Measurement item] ORP](https://www.kk-custom.co.jp/function/function_ORP.svg "[Measurement item] ORP")
![[Measurement items] Temperature, thermistor](https://www.kk-custom.co.jp/function/function_Temperature_Thermistor.svg "[Measurement items] Temperature, thermistor")
![[Function] Waterproof](https://www.kk-custom.co.jp/function/function_Waterproof.svg "[Function] Waterproof")
![[Function] Hold](https://www.kk-custom.co.jp/function/function_Hold.svg "[Function] Hold")
![[Function] MAX MIN](https://www.kk-custom.co.jp/function/function_MaxMin.svg "[Function] MAX MIN")
![[Function] Automatic power off](https://www.kk-custom.co.jp/function/function_AutoOff.svg "[Function] Automatic power off")
![[Features] Sensor can be replaced](https://www.kk-custom.co.jp/function/function_ExchangeableNewSensor.svg "[Features] Sensor can be replaced")
*1 Sensor included
*2 Sensor sold separately
*3 When using a pH sensor
*4 IP57 compliant
*5 Approximately 10 minutes (cannot be canceled)
Waterproof pH meter with replaceable sensor.
- It is also possible to measure oxidation-reduction potential by replacing it with an ORP sensor (sold separately).
- IP57 waterproof
- Equipped with a HOLD function that freezes and displays measurement values. Equipped with a MAX (maximum value)/MIN (minimum value) memory function. Equipped with an auto power-off function. (The power will automatically turn off if there is no operation for 10 minutes after the last button operation. (Can be disabled.)
Part names
Main unit
- ① Battery cover
- ② Display: Displays the ORP/pH measurement values.
- ③ Power/CAL button: Used to turn the power of the main unit on/off and to perform calibration.
- ④ H/M button: Used for HOLD (display freeze) function and MAX/MIN (maximum/minimum value) display.
- ⑤ Sensor fixing cap: Remove when replacing the sensor.
- ⑥ Sensor part: Immerse in the solution to be measured.
- ⑦ Sensor cover: Remove it when taking a measurement. When storing, fill the inside of the sensor cover with preservative solution and then reattach it.
- ⑧ Sensor cap
LCD screen
▲Back to top of page
specification
Electrical Performance
pH
| range | resolution | Measurement accuracy |
|---|---|---|
| 0.00 to 14.00 pH *6 | 0.01 pH | ± 0.1 pH |
- Sensor used: PH-6600S (included)
Oxidation-reduction potential (ORP)
| range | resolution | Measurement accuracy |
|---|---|---|
| -1000 to +1000 mV *7 | 1 mV | ±2%FS |
- Sensor used: ORP-6600S (optional)
- *FS = Full Scale
temperature
| Measurement range | resolution | Measurement accuracy |
|---|---|---|
| 0 to +90°C | 0.1℃ | ±0.5℃ |
- Sensor used: PH-6600S (included)
General specifications
| sampling | Approximately 2 times/second |
|---|---|
| Auto Power Off | Approximately 10 minutes (cannot be canceled) |
| Operating temperature and humidity | 0 to +50°C, 80% RH or less (no condensation) |
| Storage temperature and humidity | -10 to +60°C, 70% RH or less (no condensation) |
| size | Approximately W 37.5 × H 170 × D 37.5 mm |
| weight | Approximately 87 g (including batteries) |
| power supply | CR2032 lithium battery x 2 |
| accessories | Instruction manual, calibration standard solution ( B-4 , B-7 ), storage solution, pH sensor ( PH-6600S , already connected to the main unit) |
| option | |
| proofreading | Not possible |
| JAN | 4983621705225 |
Inquiry - CUSTOM Waterproof ORP/pH meter PH-6600
