Specifications
SKU: CUSTOM Waterproof pH meter PH-1000PE
Product overview
By changing out the 14 different sensors for various purposes, one unit can be used to measure a variety of objects!
- The large LCD screen simultaneously displays pH value and temperature.
- IP67 dust and water resistant.
- "Auto-lock function" holds the measurement value after it has stabilized.
- Backlight function.
- Three-point calibration is possible using pH standard solutions.You can also select NIST calibration (4.01, 6.86, 9.18) or USA calibration (4.01, 7.00, 10.01).
- It comes with a standard sensor (PHS-01PE) so you can start using it right away.
Features
By changing the 14 types of sensors, one unit can be used to measure a variety of objects.
There are 14 types of interchangeable sensors for various purposes. See here for the sensor lineup.*The short blade sensor (PHS-02PE + PHS-17PE) at the bottom right of the image is not included in this set.
IP67 dust and water resistance
Measurements can also be taken underwater using the included standard sensor.Part names/sensor shape
Main unit
- ① Liquid crystal display
- ② ENTER button
- ③ CAL/▲ button
- ④ SET/▼ button
- ⑤ Power button
- ⑥ Sensor fixing ring
- ⑦ Sensor
- ⑧ Sensor cap
360° rotating image
Clicking on the image will open a new window.
specification
Electrical Performance
pH
| range | resolution | Measurement accuracy | ATC (Automatic Temperature Compensation) |
|---|---|---|---|
| 0.00 to 14.00 pH | 0.01 pH | ± 0.1 pH | can be |
temperature
| Measurement range | resolution | Measurement accuracy |
|---|---|---|
| 0 to +60°C | 0.1℃ | ±1°C |
specification
Included sensor (PHS-01PE) specifications
| Reference measurement target | Surface of solid samples, general water samples (excluding pure water and ion-exchanged water) |
|---|---|
| Measurement object temperature range | 0 to +60°C |
| Shaft Material | ABS |
*The sensor's lifespan depends on the conditions of use. This is because it differs depending on the method and frequency of use, storage conditions, and the object being measured.
General specifications
| sampling | Approximately 3 times/second |
|---|---|
| Auto Power Off | Approximately 20 minutes (cannot be canceled) |
| Operating temperature and humidity | 0 to +50°C, 75% RH or less (no condensation) |
| Storage temperature and humidity | 0 to +60°C, 80% RH or less (no condensation) |
| size |
|
| weight |
|
| power supply | 1 x AAA battery |
| battery life | Approximately 120 hours (when using alkaline batteries) |
| Product composition | Waterproof pH meter ( PH-1001PE ) + standard sensor ( PHS-01PE ) |
| accessories | Instruction manual (with warranty), pH 4.01 calibration standard solution ( PHW-401 ), pH 6.86 calibration standard solution ( PHW-686 ) |
| option |
|
| proofreading | Not possible |
| JAN | 4983621706000 |
Inquiry - CUSTOM Waterproof pH meter PH-1000PE



