3
Share:
Specifications
SKU: CUSTOM Waterproof conductivity meter CD-1000PE
Product overview
![[Measurement item] Conductivity](https://www.kk-custom.co.jp/function/function_CD.svg "[Measurement item] Conductivity")
![[Measurement item] Impurity solubility](https://www.kk-custom.co.jp/function/function_CDPB.svg "[Measurement item] Impurity solubility")
![[Measurement item] Salt](https://www.kk-custom.co.jp/function/function_SalinityConcentration.svg "[Measurement item] Salt")
![[Measurement items] Temperature, thermistor](https://www.kk-custom.co.jp/function/function_Temperature_Thermistor.svg "[Measurement items] Temperature, thermistor")
![[Function] Dustproof](https://www.kk-custom.co.jp/function/function_AntiDust.svg "[Function] Dustproof")
![[Function] Waterproof](https://www.kk-custom.co.jp/function/function_Waterproof.svg "[Function] Waterproof")
![[Function] Auto hold](https://www.kk-custom.co.jp/function/function_AutoHold.svg "[Function] Auto hold")
![[Function] Automatic power off](https://www.kk-custom.co.jp/function/function_AutoOff.svg "[Function] Automatic power off")
![[Features] Sensor can be replaced](https://www.kk-custom.co.jp/function/function_ExchangeableNewSensor.svg "[Features] Sensor can be replaced")
*1 Standard conductivity sensor included
*2 IP67 compliant
*3 Approximately 20 minutes (cannot be canceled)
Conductivity and temperature are displayed simultaneously.
- Conductivity, TDS (total soluble impurities), and salinity can be measured with one unit.
- IP67 dust and water resistant.
- "Auto-lock function" holds the measurement value after it has stabilized.
- Backlight function.
- One-point calibration is possible using a conductivity standard solution (e.g., 1413 μS/cm).
- For various water quality surveys (e.g., industrial wastewater, pollution monitoring of water tanks and rivers, etc.), and as laboratory equipment for schools.
Features
The large LCD screen simultaneously displays conductivity and temperature.
IP67 dust and water resistance
Measurements can also be taken underwater using the included standard sensor.*The model in the image is an image of the series model.
Part names/sensor shape
Main unit
- ① Liquid crystal display
- ② ENTER button
- ③ CAL/▲ button
- ④ SET/▼ button
- ⑤ Power button
- ⑥ Sensor fixing ring
- ⑦ Sensor
- ⑧ Sensor cap
sensor
Sensor immersion guideline for the object
▲Back to top of page
specification
Electrical Performance
conductivity
| range | resolution | Measurement accuracy | ATC (Automatic Temperature Compensation) |
|---|---|---|---|
| 0.0 μS/cm to 20.00 mS/cm | 0.1 μS/cm to 0.01 mS/cm | ±2%FS | can be |
TDS (Total Dissolved Impurities)
| range | resolution | Measurement accuracy |
|---|---|---|
| 0.0 mg/L(ppm) ~ 10.00 g/L(ppt) | 0.1 mg/L(ppm) ~ 0.01 g/L(ppt) | ±2%FS |
salt
| range | resolution | Measurement accuracy |
|---|---|---|
| 0.0 mg/L(ppm) ~ 13.00 g/L(ppt) | 0.1 mg/L(ppm) ~ 0.01 g/L(ppt) | ±2%FS |
temperature
| Measurement range | resolution | Measurement accuracy |
|---|---|---|
| 0 to +60°C | 0.1℃ | ±1°C |
General specifications
| sampling | Approximately 3 times/second |
|---|---|
| Auto Power Off | Approximately 20 minutes (cannot be canceled) |
| Operating temperature and humidity | 0 to +50°C, 75% RH or less (no condensation) |
| Storage temperature and humidity | 0 to +60°C, 80% RH or less (no condensation) |
| size | Approx. W 40 × H 185 × D 48 mm |
| weight | Approximately 130 g (including batteries) |
| power supply | 1 x AAA battery |
| battery life | Approximately 120 hours (when using alkaline batteries) |
| Product composition | Waterproof conductivity meter body + standard conductivity meter sensor ( CDS-01PE ) |
| accessories | Instruction manual (with warranty), calibration standard solution for conductivity meter ( CDW-1000 ) |
| option | |
| proofreading | Not possible |
| JAN | 4983621706055 |
Inquiry - CUSTOM Waterproof conductivity meter CD-1000PE
