2
Share:
Specifications
SKU: CUSTOM Analog Tester CX-04MBN
Product overview
![[Measurement item] AC voltage](https://www.kk-custom.co.jp/icons/function_ACV.svg "[Measurement item] AC voltage"){kind=icon}
![[Measurement item] DC voltage](https://www.kk-custom.co.jp/icons/function_DCV.svg "[Measurement item] DC voltage"){kind=icon}
![[Measurement item] DC current (milliamperes)](https://www.kk-custom.co.jp/icons/function_DCmA.svg "[Measurement item] DC current (milliamperes)"){kind=icon}
![[Measurement item] Resistance](https://www.kk-custom.co.jp/icons/function_ElectricalResistance.svg "[Measurement item] Resistance"){kind=icon}
![[Measurement item] Continuity](https://www.kk-custom.co.jp/icons/function_ContinuityCheck.svg "[Measurement item] Continuity"){kind=icon}
![[Measurement item] Battery check](https://www.kk-custom.co.jp/icons/function_BatteryCheck.svg "[Measurement item] Battery check"){kind=icon}
![[Measurement item] decibel](https://www.kk-custom.co.jp/icons/function_decibel.svg "[Measurement item] decibel"){kind=icon}
![[Function] Magnet](https://www.kk-custom.co.jp/icons/function_Magnet.svg "[Function] Magnet"){kind=icon}
![[Measurement item] Gold-plated test lead](https://www.kk-custom.co.jp/icons/function_GoldPlatedTestleads.svg "[Measurement item] Gold-plated test lead"){kind=icon}
A magnet is built into the back, allowing the unit to be fixed to the metal surface of a vehicle, distribution board, etc., allowing measurements to be taken with both hands.
- When a continuity check is performed, both a buzzer and an LED will notify you.
- The test lead tips are gold-plated to prevent poor contact.
Built-in magnet on the back of the device
The main unit can be fixed to the metal surface of a vehicle, distribution board, etc., allowing measurements to be made with the probes in both hands.When checking continuity, both a buzzer and an LED will notify you.
Even in noisy surroundings, continuity can be confirmed by the LED lighting up.Gold-plated test leads
Test lead retractable type
Once you're done using it, you can store it away compactly.Part names
- ①Guidelines
- ②Continuity LED
- ③0Ω adjustment knob
- ④Range dial
- ⑤Scale plate
- ⑥ Pointer zero adjustment knob
- ⑦ Buffer rubber
- ⑧ Probe cover
- ⑨ Test pin
- ⑩ Barrier section
- ⑪ Test lead
- ①Resistance
- ②AC voltage, DC voltage, DC current
- ③Battery voltage check
- ④Decibel
360° rotating image
▲Back to top of page
specification
Electrical Performance
| range | Accuracy | Input Impedance | |
|---|---|---|---|
| ACV | 50, 250, 500 V | ±5% of full scale | 2 kΩ/V |
| DCV | 10, 50, 250, 500 V | ±5% of full scale | 2 kΩ/V |
| DCmA | 25, 250 mA | ±5% of full scale | - |
| Ω | 20 kΩ (×10), 2 MΩ (×1k) | ±5% of memory length | - |
| Battery voltage BAT | 1.5, 9 V | Classification into GOOD, ?, and BAD | - |
| dB | -6 to +56 dB | - | - |
General specifications
| Operating temperature and humidity | +5 to +40°C, 75% RH or less (no condensation) |
|---|---|
| Storage temperature and humidity | +5 to +40°C, 75% RH or less (no condensation) |
| size | Approx. W 85 × H 120 × D 25 mm |
| weight | Approximately 210 g (including batteries) |
| power supply | 1 x AAA battery (battery sold separately) |
| accessories | Instruction manual (with warranty) |
| proofreading | Possible |
| Compliance standards | IEC61010-1 CAT.III 300V / CAT.II 600V |
| JAN | 4983621102819 |
Inquiry - CUSTOM Analog Tester CX-04MBN
