Name: CUSTOM Digital Multimeter CDM-7100
Brand: CUSTOM
Availability: InStock

CUSTOM Digital Multimeter CDM-7100

Brand: CUSTOM

Category: Testing Instruments

Description

Specifications

SKU: CUSTOM Digital Multimeter CDM-7100

Product overview

Covered AC Wire

Sensor included

LED at the tip of the main unit

*1 LED & buzzer notification
*2 Approximately 15 minutes (cancellable)

A multi-functional type that is compatible with CAT.IV and can also be used as a power meter, making it useful in a variety of locations.

Voltage (DC, AC), current (DC, AC), resistance, frequency, capacitance, temperature, continuity check function, diode check function.
The true RMS method allows the display of RMS values for waveforms other than sine waves.
Other features include duty check function, data hold function, and relative comparison function.
It has a backlight, making it easy to check the values even when working in a dark place.
Equipped with an auto power off function to prevent battery drain.
Equipped with non-contact voltage detection function (NCV).
Test leads can be attached and stored on the back.
The tip of the product is equipped with an LED light that is useful in dark places.
Comes with a shock-absorbing holster case.

CAT.IV compatible and can also be used for power meters

Compliant with IEC61010-1 CAT III 1000V, CAT IV 600V.

With non-contact voltage detection function (NCV)

※imageWhen the detector on the top of the unit is brought close and AC voltage is detected, a buzzer and LED will sound to notify you.
*The detection voltage range is AC 90-1000V, 50-60Hz. This function is a guideline, so to measure the exact voltage, please use the AC voltage (ACV) measurement function of this device.

Equipped with an LED light at the tip of the product.

※imageConvenient for working in dark places.

Product Details

Part names

① Liquid crystal display section
② Select button
③ Range button
④ Function Dial
⑤ 20A input terminal
⑥ μA/mA input terminal
⑦ COM input terminal
⑧ V/Ω/Hz/Capacitor/Temperature/Diode/Continuity Input Terminal
⑨ Frequency/Duty/Relative button
⑩ Backlight/Hold Button
⑪ LED light
⑫ Voltage detector (NCV)
⑬ Test lead attachment part
⑭ Stand
⑮ Battery cover
⑯ Probe cover
⑰ Barrier part of test lead
⑱ Test lead

▲Back to top of page

specification

Electrical Performance

	range	resolution	Accuracy	remarks
DCV	60 mV / 600 mV / 6 V / 60 V / 600 V	0.01 mV / 0.1 mV / 0.001 V / 0.01 V / 0.1 V	±(0.5% + 2 dgt)	Input impedance 10 MΩ
DCV	1000 V	1 V	±(0.8% + 2 dgt)	Input impedance 10 MΩ
ACV	60 mV / 600 mV / 6 V / 60 V	0.01 mV / 0.1 mV / 0.001 V / 0.01 V	±(0.8% + 2 dgt)	Input impedance 10 MΩ 40 Hz to 1000 Hz
ACV	600V / 750V	0.1V / 1V	±(1.0% + 3 dgt)	Input impedance 10 MΩ 40 Hz to 1000 Hz
DCA	600 μA / 6000 μA / 60 mA / 600 mA	0.1 μA / 1 μA / 0.01 mA / 0.1 mA	±(1.0%rdg + 3dgt)	Up to 20 A 10A or more: within 10 seconds
DCA	20A	0.01 A	±(1.5%rdg + 3dgt)	Up to 20 A 10A or more: within 10 seconds
ACA	600 μA / 6000 μA / 60 mA / 600 mA	0.1 μA / 1 μA / 0.01 mA / 0.1 mA	±(1.0% + 3 dgt)	Up to 20 A 10A or more: within 10 seconds 50 Hz to 60 Hz
ACA	20A	0.01 A	±(1.5% + 3 dgt)	Up to 20 A 10A or more: within 10 seconds 50 Hz to 60 Hz
Ω	600Ω / 6kΩ / 60kΩ / 600kΩ	0.1 Ω / 0.001 kΩ / 0.01 kΩ / 0.1 kΩ	±(0.8%rdg + 2dgt)	Open circuit voltage: approx. 0.3 V
Ω	6 MΩ / 60 MΩ	0.001 MΩ / 0.01 MΩ	±(2.0%rdg + 3dgt)	Open circuit voltage: approx. 0.3 V
capacitance	60nF / 600nF / 6μF / 60μF	0.01 nF / 0.1 nF / 0.001 μF / 0.01 μF	±(3.0%rdg + 3dgt)	10 nF to 60 mF
capacitance	600 μF / 6 mF / 60 mF	0.1 μF / 0.001 mF / 0.01 mF	±(5.0%rdg + 5dgt)	10 nF to 60 mF
temperature	1000℃	1°C	±(2.5%rdg + 3dgt)	-20℃ to 400℃ K-type thermocouple

	Buzzer Threshold	remarks
Continuity check	Approximately 50 MΩ	Open circuit voltage: approx. 1.0 V

	range	resolution	remarks
Diode Check	0 V to 3 V	1 mV	Open circuit voltage: approx. 3.3 V

	Measurement range	Accuracy	frequency
frequency	1 Hz to 5 MHz	±(0.8%rdg + 2dgt)	1.0 Vrms or more, sine wave, 50% square wave
DUTY	1.0 to 99.0%	±(2.5% + 3 dgt)	10 Hz to 10 kHz, 1.5Vrms or more, square wave
Voltage tester	AC 90 V to AC 1000 V	-	50 Hz or 60 Hz

*Accuracy guarantee for AC voltage/current is limited to sine waves.
*At 23±5°C, 75% RH or less

General specifications

Detection method	True RMS
display	LCD, maximum display “6000”
Range switching	Auto/Manual
polarity display	Automatic switching, only "-" displayed
sampling	Approximately 3 times/second
Auto Power Off	Approximately 15 minutes (can be canceled)
Operating temperature and humidity	0 to +40°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +60°C, 80% RH or less (no condensation)
size	Approx. W 89 x H 190 x D 40 mm
weight	Approximately 370 g (including batteries)
Test lead length	Approximately 75cm
power supply	9V dry battery x 1
battery life	Approximately 200 hours (when using alkaline batteries)
accessories	Instruction manual, test leads, K-type thermocouple, battery cover screwdriver
option	Case: AC-M1 Test lead: ATL-3N 1 A fuse: DMF-711A 15A fuse: DMF-7115
proofreading	Possible
Compliance standards	IEC61010-1 CAT III 1000V, CAT IV 600V
JAN	4983621100440

*The battery included with this device is a sample. It may have a shorter battery life than regular commercially available batteries. Heavy use of the backlight/buzzer will shorten the battery life.

Inquiry - CUSTOM Digital Multimeter CDM-7100

Name*

Email*

Contact Number*

Message (optional)