Name: CUSTOM Clamp-on digital multimeter MC-02
Brand: CUSTOM
Availability: InStock

CUSTOM Clamp-on digital multimeter MC-02

CUSTOM Clamp-on digital multimeter MC-02

Brand: CUSTOM

Category: Testing Instruments

Description

Specifications

SKU: CUSTOM Clamp-on digital multimeter MC-02

Product overview

*1 Buzzer notification
*2 Approximately 15 minutes (cancellable)

A digital multimeter with clamps that makes it easy to measure current even in tight spaces.

Supports measurements of AC voltage, DC voltage, AC current, DC current, resistance, continuity check, diode test, capacitor check, frequency measurement, and duty check.
Clamp maximum measurement conductor diameter: φ12mm
Small and lightweight, palm-sized.
The test lead tips are 19mm long, allowing them to fit into a power outlet. They are also gold-plated to prevent poor contact.

Digital multimeter with clamps and test lead storage on the back

MC-02 Clamp and test leads stored on the back

MC-02 Compact size that fits in your pocket when stored

Gold-plated test leads are used.

Tip: 19mm. Probe cover is removable.

Open clamp makes it easy to measure current even in tight spaces!

Names of each part (main body)

①Display section
②MODE button
③HOLD button
④Function dial
⑤Holster case
⑥Clamp sensor
⑦DCA ZERO button
⑧ Test leads
⑨ Probe cover
⑩ Barrier part of test lead
⑪ Barrier part of clamp

Part names (display part)

①Fixed display
②Relative value
③Auto power off
④Diode test
⑤ Continuity test
⑥Measurement units
⑦Bar graph
⑧DC/AC
⑨ Battery low mark

▲Back to top of page

specification

Electrical Performance

	range	resolution	Accuracy
ACV	6.000m V	1m V	±(1.5 %rdg + 5 dgt) *0.1 Vrms~
	60.00 V	10 V
	600.0 V	100 V
DCV	600.0mV	0.1mV	±(0.8%rdg + 5dgt)
	6.600 V	0.001 V	±(1.5%rdg + 2dgt)
	66.00 V	0.01 V	±(1.5%rdg + 2dgt)
	600.0 V	0.1 V	±(1.5%rdg + 5dgt)
ACA	100.0 A	0.1 A	±(3.0%rdg + 5dgt)
DCA	100.0 A	0.1 A	±(3.0%rdg + 5dgt)
Ω	660.0 Ω	0.1 Ω	±(1.0%rdg + 4dgt)
	6.000 kΩ	1 ohm	±(1.5%rdg + 2dgt)
	60.00 kΩ	10 ohms
	600.0 kΩ	100 ohms
	6.000 MΩ	1 kΩ	±(2.0%rdg + 5dgt)
	60.00M Ω	10 kΩ	±(3.0%rdg + 8dgt)
frequency	9.999 Hz	0.001 Hz	±(1.0 ±5 dgt)
	99.99 Hz	0.01 Hz
	999.9 Hz	0.1 Hz
	9.999 kHz	0.001 kHz
	99.99 kHz	0.01 kHz
	999.9 kHz	0.1 kHz
Capacitance (CAP)	9.999 nF	0.001 nF	-
	99.99 nF	0.01 nF	±(4.5% + 20dgt)
	999.9 nF	0.1 nF	±(3.0 ±5 dgt)
	9.999 μF	0.001 μF
	99.99 μF	0.01 μF
	999.9 μF	0.1 μF	-
	9.999 mF	0.001 mF
	99.99 mF	0.01 mF
DUTY %	20 to 80%	0.1%	-
frequency Hz	9.999 Hz	0.001 Hz	±(1.0% + 5 dgt)
	99.99 Hz	0.01 Hz
	999.9 Hz	0.1 Hz
	9.999 kHz	0.001 kHz
	99.99 kHz	0.01 kHz
	999.9 kHz	0.1 kHz

		Measurement range	Accuracy
frequency	alternating current	50 to 1 kHz	±(0.1% + 3 dgt)
frequency	AC voltage	50 to 1 kHz	±(0.1% + 3 dgt)

Continuity check	Buzzer threshold: approx. 50 Ω
Diode Check	Forward voltage: Approx. 0.4 to 0.9 V Reverse voltage: .OL displayed

* Conditions: 23°C ±5°C, 75% RH or less * Accuracy: ±(__% reading + __dgt least significant digit)
* Accuracy guarantee for AC voltage, AC current, and frequency is limited to sine waves.
* - indicates no accuracy guarantee.

Function	Maximum rated input value	Notes Ω
DCV/ACV	DC 600V /AC 600V	Buzzer when DC/AC exceeds 600V
DCA/ACA	DC 100A/AC 100A	-
Ω, CAP, diode check, continuity check	(Voltage input prohibited)	DC 250V / AC 250V withstand voltage
Hz, %	(Square wave 5Vp-p standard)	DC 250V / AC 250V withstand voltage

General specifications

Detection method	True RMS
display	LCD, maximum display "6000", with bar graph (61 segments)
Range switching	Auto (Manual available)
polarity display	Automatic switching, only "-" displayed
Clamp maximum measurement conductor diameter	φ12mm
sampling	Approximately 3 times/second
Auto Power Off	Approximately 15 minutes (can be canceled)
Operating temperature and humidity	0 to +40°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +60°C, 80% RH or less (no condensation)
size	Approx. W 81 x H 135 x D 30 mm
weight	Approximately 200 g (excluding batteries)
power supply	2 x AAA batteries (sold separately)
accessories	Instruction manual (with warranty), 2 probe covers (pre-installed)
option	Alligator pin leads: ATL-4N , ATL-5N Soft case: CC-02
proofreading	Possible
Compliance standards	IEC61010-1 compliant CAT III 300V, CAT II 600V
JAN	4983621930030