Specifications
SKU: CUSTOM AC/DC Clamp Meter C-12
Product overview
A clamp meter that can measure AC and DC current.
- Inrush current measurement is possible. It is possible to measure large currents that occur instantaneously, such as surge currents.
- Non-contact voltage detector (NCV). LED indicator indicates live AC lines.
- Data hold function
- Auto power off function to prevent battery drain.
- Equipped with a backlight LCD screen that allows you to check measured values even in dark places.
Usage example
DC current measurement image
Low voltage voltage detector imagePart names
Main unit
- ①Clamp sensor
- ②Clamp opening/closing lever
- ③Power button
- ④Mode button
- ⑤Liquid crystal display
- ⑥Non-contact voltage detection section
- ⑦Center position mark
- ⑧Non-contact voltage detection LED
- ⑨Backlight/Hold button
- ⑩ Inrush current button
- ⑪ Zero button
- ⑫Battery cover
- ⑬ Wrist strap attachment hole
360° rotating image
Clicking on the image will open a new window.
specification
Electrical Performance
| Accuracy guarantee range | resolution | Accuracy | frequency | |
|---|---|---|---|---|
| ACA | 0.20 to 40.00 A | 0.01 A | ±(2.5%rdg + 10dgt) | 50/60 Hz |
| 40.0 to 400.0 A | 0.1 A | ±(2.8%rdg + 8dgt) | ||
| 0.20 to 40.00 A | 0.01 A | ±(2.8%rdg + 10dgt) | 50 to 400 Hz | |
| 40.0 to 400.0 A | 0.1 A | ±(2.8%rdg + 8dgt) | ||
| DCA | 0.20 to 40.00 A | 0.01 A | ±(2.5%rdg + 10dgt) | - |
| 40.0 to 400.0 A | 0.1 A | ±(2.8%rdg + 8dgt) | ||
| Voltage detection (NCV) | Measurement range: AC90V to AC600V Frequency: 50Hz or 60Hz |
* AC current accuracy is guaranteed only for sine waves.
General specifications
| Detection method | True RMS |
|---|---|
| display | LCD, 4000 count |
| Range switching | Auto |
| Maximum measurement current | 399.9A |
| Maximum measurement conductor diameter | φ24 mm |
| sampling | Approximately 2 times/second |
| Auto Power Off | Approximately 15 minutes (cannot be canceled) |
| Operating temperature and humidity | -5 to +40°C, 80% RH or less (no condensation) |
| Storage temperature and humidity | -20 to +60°C, 80% RH or less (no condensation) |
| size | Approx. W 60 × H 152 × D 28 mm |
| weight | Approximately 140 g (including batteries) |
| power supply | 2 x AAA batteries |
| battery life | Approximately 100 hours |
| accessories | Storage case, instruction manual (with warranty), wrist strap |
| proofreading | Possible |
| Compliance standards | IEC-61010-01 CAT.II 600V / CAT.III 300V |
| JAN | 4983621090253 |
Inquiry - CUSTOM AC/DC Clamp Meter C-12
