Name: CUSTOM Mini AC Clamp Meter C-02S
Brand: CUSTOM
Availability: InStock

CUSTOM Mini AC Clamp Meter C-02S

Brand: CUSTOM

Category: Testing Instruments

Description

Specifications

SKU: CUSTOM Mini AC Clamp Meter C-02S

Product overview

Covered AC Wire

*1 LED & buzzer notification
*2 Approximately 10 minutes (cancellable)

This auto-function model measures current, voltage, and resistance. It functions as a clamp meter, tester, and voltage detector, all in one!

In addition to the AC clamp function, it is equipped with AC/DC voltage measurement, resistance measurement, frequency measurement, and continuity check functions.
Voltage and resistance are automatically switched.
Equipped with non-contact voltage detection (NCV) function, backlight function, and auto power off function.

Usage example

AC current measurement image

Voltage measurement image

Non-contact voltage detection function image

*Please wear protective insulating equipment when measuring or in areas where electric shock is expected.

Part names

Main unit

①Clamp sensor
②Voltage detection LED
③Clamp opening/closing lever
④Power button
⑤COM input terminal (black lead)
⑥V Ω input terminal (red lead)
⑦Display section
⑧ Frequency/non-contact voltage detector button
⑨Data hold/backlight button
⑩ Barrier section
⑪Non-contact voltage detection section

display

① AC voltage mode or AC current mode display
② DC voltage mode display
③Unit display
④Battery level display
⑤Resistance/continuity mode display
⑥ Non-contact voltage detection mode display
⑦Auto scan mode display
⑧Data hold display
⑨Auto power off function enabled indicator

▲Back to top of page

360° rotating image

Clicking on the image will open a new window.

specification

Electrical Performance

	range	resolution	Accuracy
ACV	1.0 to 600 V	0.1 V	±(0.8%rdg + 5dgt) / 45 to 65Hz
DCV	0.5 to 600 V	0.1 V	±(0.5% rdg+3 dgt)
ACA	0.01 to 6 A	0.001 A	±(2.5%rdg + 8dgt) / 45 to 65Hz
	6 to 60 A	0.01 A
	60 to 200 A	0.1 A
Ω	0 to 6 kΩ	0.001 kΩ	±(0.8%rdg + 3dgt)
frequency	40 to 60 Hz	0.1 Hz	±(1.0%rdg + 5dgt)
frequency	60 to 1000 Hz	1 Hz	±(1.0%rdg + 5dgt)
Continuity check	0 to 50 Ω: Beep sounds
Non-contact voltage detection	AC 90 to 1000 V: Beep sounds and LED flashes

* At 23±5°C and 75% RH or less

General specifications

Detection method	Average value method
display	LCD display, 6000 counts
Range switching	Auto
Maximum measurement conductor diameter	φ20 mm
sampling	Approximately 3 times/second
Auto Power Off	Approximately 10 minutes (can be canceled)
Operating temperature and humidity	0 to +40°C, 75% RH or less (no condensation)
Storage temperature and humidity	-10 to +50°C, 75% RH or less (excluding batteries, no condensation)
size	Approx. W 63 × H 158 × D 28 mm (excluding clamp opening/closing lever)
weight	Approx. 136 g (including batteries, excluding test leads)
power supply	2 x AAA batteries
battery life	Up to approximately 150 hours (using alkaline batteries)*
accessories	Storage case, instruction manual, test leads x 1 set
option	Test lead: ATL-3N
proofreading	Possible
Compliance standards	IEC 61010-1, IEC 61010-2-30, IEC 61010-2-032 CAT.II 1000V, CAT.III 600V
JAN	4983621090192

*Frequent use of the backlight will shorten battery life.

Inquiry - CUSTOM Mini AC Clamp Meter C-02S

Name*

Email*

Contact Number*

Message (optional)