Share:
Specifications
SKU: Omni 6451 Instrument Holder Series 6451 Series
This Instrument Holder has automatic centering over the axis nail. With the holder, any measuring instrument with 5/8” thread can be fixed quickly and stably on the batter board. The holder consists of a base plate for the instrument and a clamping device. Both are screwed to each other and form a unit. With the clamping device, a high-performance screw clamp, the holder can be attached to planks, boards or battens. When installing the holder over a vertical axle nail, an automatic centering takes place due to its design. Clamping can be done on the batter boards without an axis nail. Due to the large span of the screw clamp of up to 190 mm, the surveying possibilities are almost unlimited.
Technical Data:
• 5/8″ external thread centers over the axis nail on planks, battens and squared timbers etc. over a range of 60 mm width
• To use with nails with max. head-Ø 9,5 mm
• Dimensions: 180 (300) x 150 (180) x 100 mm (incl. screw clamp)
• Total weight of the holder: around. 2,1 kg
| 6451-190 | Max. Span 190mm |
| 6451-290 | Max. Span 290mm |
Inquiry - Omni 6451 Instrument Holder Series 6451 Series
