DytSpectrumOwl CA-20D Online Thermal Camera Analyzer

DytSpectrumOwl CA-20D Online Thermal Camera Analyzer

Brand: DytSpectrumOwl

Category: Thermal Analyzer

DytSpectrumOwl CA-09D Thermal Analyzer

DytSpectrum CA-60D R&D Level Thermal Analyzer

Description

Specifications

SKU: DytSpectrumOwl CA-20D Online Thermal Camera Analyzer

CA-20D Online Thermal Camera Analyzer

Name: DytSpectrumOwl CA-20D Online Thermal Camera Analyzer
Brand: DytSpectrumOwl
Availability: InStock

◎ Real-time nonstop temperature monitoring

◎ Benchtop design specially for electronics repairing and thermal management

◎ Eash operation with a USB cable connect to PC

◎ Equipped 260x200 resolution to output vivid thermal imaging

◎ Quick response with 25 Hz refresh rate

◎ Wide temperature measurement range -10~550C;

◎ Support extra experimental box with temperature sensor

Overview

CA-20 entry-level thermal analyzer can analyze thermal failures, heat conduction and heat distribution of circuit boards and materials. The CA-20D equipped with 260*200 detector resolution, which not only detect temperature changes of electronic components and heating & heat sink materials, the relatively rich software functions can also record a variety of test data.

In addition to meeting all the diagnostic functions of the CA-09D for circuit board repairing, the CA-20 can also perform thermal analysis data recording and analysis. It is a very cost-effective, entry-level thermal analysis instrument

Analysis mode

Circuit board analysis mode

Analysis mode of E-cigarette atomizer

Multi-dimensional analysis mode

Analysis mode of material thermal capacity

Defect analysis mode

Application Scenario

Analysis of the thermal design of the circuit board

When the circuit board chip heats up, users can check the components affected by the heat to adjust the layout.

Detection and analysis of heat conduction material

When the heat conduction material conducts heat, different color blocks can be set to view the distribution of heat conduction.

Temperature control analysis of E-cigarette

Quickly tracking the heating rate and temperature of the atomizer

Thermal quality analysis of products and components

The aging degree of the tested components can be analyzed through the simultaneous comparison of the standard samples and the tested samples.

Circuit board pulse heating analysis

The thermal analyzer can quickly capture the occasional pulse heat emitted by some components on the circuit board due to failure.

Material heat dissipation analysis

The heat dissipation of different heat dissipation materials can be analyzed through the temperature color block.

Analysis of the corresponding relationship between voltage, current and temperature

Heating capacity analysis of heating materials at different voltages and currents

The heating rate, heating efficiency and heating temperature of materials such as heating wire and heating sheet at different voltages and currents can be quantitatively analyzed.

Location detection of short circuit and leakage

When repairing the circuit board, the leakage position can be located through the first, second and third high temperature points.

Specification

System parameters	CA-20	CA-30	CA-60
IR resolution	260*200	384*288	640*512
Spectral range	8~14um
NETD	70mK@25℃	50mK@25℃
FOV	42°x32°	41.1°x30.8°	45.7°x37.3°
Frame rate	25Hz
Focus mode	Manual focus
Working temperature	-10℃~+55℃
Measurement and analysis
Temperature range	-10℃~450℃	-10℃~550℃	-10℃~550℃
Temperature measurement method	Maximum temperature, minimum temperature and average temperature
Temperature measurement accuracy	±2 or ±2% for -10℃~120℃, and ±3% for 120℃~550℃
Measuring distance	3~150 cm	4~200 cm	4~200 cm
Temperature correction	Manual/Automatic
Emissivity correction	Adjustable within 0.1-1.0
Data sampling frequency	It can be configured flexibly, such as 20FPS, 10FPS, 5FPS, 1FPS.
Image file	Full-temperature JPG thermogram (Radiometric-JPG)
Video file	MP4
Device dimension
Single board	220mm x 172mm, height of 241mm
Double board	346mm x 220mm, height of 341mm
Data acquisition accessories (not included in standard configuration)
Heating table	Standard configuration of 2 oiling test holes of resistance heating wires, which can be customized
	Customized adjustment of the simulated suction degree, duration and times of the suction pump
Data acquisition	Recording of temperature data without time limit, including temperature change data, data corresponding to resistance heating wires and resistance values, data corresponding to simulated power supply time and temperature, and calculation of heating uniformity