6
Share:
Specifications
SKU: Fosensor Laser Dust Sensor Module Price FS00202
- Both the inlet and outlet are on the same side, no need for additional air ducts.
- Detect mass concentration of PM2.5γPM10γPM1.0
- High Accuracy & Rapid Response
- οΌ40000 Hours (Continuous working time)
- Fully shielded design, anti-static interference
- The minimum resolution particle size is 0.3 micrometers
- Reliable service for sustainable cooperation
Laser Dust Sensor FS00202 Introduction
The FS00202 laser dust sensor is a digital universal particle concentration sensor used to obtain the mass concentration (μg/m³) of suspended particles in the air, including PM1.0, PM2.5, and PM10, as well as the number of particles of 0.3, 0.5, 1.0, 2.5, 5.0, and 10um per unit volume. The particle matter sensor outputs data in a digital interface format. This dust concentration sensor can be embedded in various instruments or environmental improvement equipment related to the concentration of suspended particles in the air, providing timely and accurate concentration data.
Features Of FS00202 Sensor
1.The minimum resolution particle size is 0.3 micrometers
The high sensitivity and quick response can detect minimum size of particle is down to 0.3 micrometers.
2.Fully shielded design, anti-static interference
High stability, high accuracy, longer service life, reliable adaptability, wide application areas.
3.Long service life, accurate and stable data
Lifetime: The service life is up to 40000 hours (Continues work)
4.Compact and portable
The sensor has a thickness of only 12mm, making it very compact and portable.
Specifications Of Air Dust Sensor
| Parameter type | Parameter index | |
| Detection Type | PM2.5, PM10, and PM1.0 mass concentration (μg/m³) | |
| The number of particles of 0.3, 0.5, 1.0, 2.5, 5.0, and 10um per unit volume | ||
| Detection Range | 0~1000μg/m³ (Extendable) | |
| Detection Accuracy | Min Solution | 1μg/m³ |
| Data Accuracy | 0~100μg/m³: ±10μg/m³ | |
| 101~1000μg/m³: ±10%reading | ||
| Batch Consistency | ≥90% | |
| Operation Voltage | DC 5V±0.1V | |
| Operation Current | ≤100mA (@5V power supply) | |
| Standby Current | ≤200μA (@5V power supply) | |
| Stable Time | ≤8s | |
| Detection Frequency | The data is updated once per second (Default) | |
| Output Methods | Default Output | UART (3.3V_TTL Voltage level) |
| Reserve | IICγDACγPWM (Default Off) | |
| Service Life | οΌ40000 hours (Continuous operation) | |
| Reference Dimension | 47.8×36.8×12.0 mm | |
| Operation Temperature | -10βο½50β | |
| Operation Humidity | 0ο½99%RH (Non-Condensation) | |
| Storage Temperature | -30βο½ 60β | |
| Storage Humidity | 0ο½99%RH (Non-Condensation) | |
How To Design Dust Mearsurement Sensor By Fosensor Supplier
How To Define Pin Of Dust Sensor Module
| PIN | Defination | Explanation | ||
| 01 | VCC | Power input +5V | ||
| 02 | VCC | Power input +5V | ||
| 03 | GND | Ground terminal | ||
| 04 | DND | Ground terminal | ||
| 05 | RESET | Module reset signal (low level @3.3V) | ||
| 06 | DAC | Analog voltage (default disabled) | ||
| 07 | RXD/SDA | UART-RXD / IIC-SDA (data input @3.3V/5V) | ||
| 08 | PWM | Default off | ||
| 09 | TDX/SCL | UART-TXD / IIC-SCL (data output @3.3V/5V) | ||
| 10 | SET | Set high level or floating for normal working state, low level for sleep mode | ||
Application Of Dust Detection Sensor
This kind of particle mattter sensor can be used in indoor places and outdoor places, now we will tell you as below:
1.Air quality monitoring equipment, portable meters, air purifiers
2.Fresh air ventilation system, air conditioner, smart home equipment
3.Hospitals, hotels, schools and other public places
Untitled
Inquiry - Fosensor Laser Dust Sensor Module Price FS00202
