6
Share:
Fosensor Semiconductor C2H5OH Alcohol/Ethanol/Methanol Sensor/Probe FS00700B
Brand: Fosensor
Specifications
SKU: Fosensor Semiconductor C2H5OH Alcohol/Ethanol/Methanol Sensor/Probe FS00700B
-
Low cost and small size
-
Simple application circuits
-
High consistency
-
Long service life
Semiconductor C2H5OH Alcohol Sensor FS00700B Introduction
Alcohol probe FS00700B is a semiconductor gas sensor that uses precise automated production and testing equipment to reduce human interference. It ensures accurate and consistent data, even during large-scale production. Semiconductor oxide alcohol level sensor is particularly suitable for portable product applications due to its small design and easy integration.
Work Principle Of Semiconductor Alcohol Gas Probe
The gas-sensitive material used in gas sensors is a semiconductor material with low conductivity in clean air, with an embedded heating wire and metal electrode. When alcohol vapors are present in the sensor’s environment, the conductance of the sensor rises. And the amount of change in conductance increases with the concentration of alcohol gas. By the amount of change in conductance, alcohol gas sensor can sense the concentration of alcohol in the air.
Features Of Alcohol Probe FS00700B
♠ Small and easy to integrate design
♠ Data is precise and has good consistency
♠ Low power consumption and long service life
♠ High sensitivity to low-concentration pollutant gases
Specifications of C2H5OH Ethanol Probe
|
Electrical Parameters |
Technical Specifications: |
|||
|
Package Standard |
Metal TO-05 |
|||
|
Detected Gas |
Alcohol |
|||
|
Detection Range |
0~500ppm |
|||
|
Standard Circuit |
Heating Voltage |
VH |
2.5V±0.1V DC/AC |
|
|
Element characteristics under standard test conditions |
Circuit Voltage |
VC |
≤24V DC |
Ps≤15mW |
|
Load Resistance |
RL |
Adjustable |
Ps≤15mW |
|
|
Heating Resistance |
RH |
11Ω±3Ω(room temperature) |
||
|
Sensitive Resistance |
Rs |
5KΩ～50KΩ(in 50ppm alcohol) |
||
|
Sensitivity |
S |
Rs(in air)/Rs(50ppmalcohol≥3） |
||
|
Heating Power |
PH |
≤350mW |
||
|
Standard Test Conditions |
Temperature/Humidity |
20℃±2℃；65%±5%RH |
||
|
Preheat Time |
Not less than 24 hours |
|||
|
Standard Test Circuit |
VC:2.5V±0.1V |
|||
|
VH:2.5V±0.1V |
||||
The Structure Design Of Methanol Sensor
Application Of Alcohol Content Sensor
1. Instrumentation, Alcohol Breath Tester
2. Air quality tester and module
3. Portable Alcohol Detector, Gas Analyzer
4. Industrial productions, air purifier etc.
Inquiry - Fosensor Semiconductor C2H5OH Alcohol/Ethanol/Methanol Sensor/Probe FS00700B
