3
Share:
Fosensor Electrochemical H2S Hydrogen Sulfide Gas Sensor Module FS01701
Brand: Fosensor
Specifications
SKU: Fosensor Electrochemical H2S Hydrogen Sulfide Gas Sensor Module FS01701
- H2S detection sensor module
- Support UART and MODBUS-RS485
- Three-electrode electro-chemical sensor
- Outstanding anti-interference
- Temperature compensation
- Reliable service for sustainable cooperation
Electrochemical H2S Hydrogen Sulfide Gas Sensor Module FS01701 Introduction
FS01701 is a fuel cell type electrochemical sensor that works by the oxidation and reduction reactions on the working electrode and counter electrode, releasing charges to form a current. The magnitude of the current generated is proportional to the concentration of hydrogen sulfide and follows Faraday’s law. By testing the magnitude of the current, the hydrogen sulfide concentration can be determined. It uses a high-stability gas sensor and a high-performance microprocessor that supports UART output and Modbus-RS485 output for easy use. The module adopts precise automatic calibration and detection equipment, reducing human interference and ensuring the accuracy and consistency of data during large-scale production.
Electrochemical H2S Hydrogen Sulfide Gas Sensor Module FS01701 Features
1.Detection range
Default: 0～10PPM
2.High accuracy, high consistency, high solution, rapid response
Data detection accuracy: ±≤5% reading
Minimum solution: 0.1 ppm
Response time: T90 ≤30s
3.Data output methods
FS01701 supports UART and MODBUS-RS485
4.Long service life
The lifetime is up to 2 years (in the air)
5.High detection frequency
The data updates once per second by default.
Application
1.Gas detectors, instrumentation equipment
2.Ventilators, medical and health equipment
3.Safety monitoring of industrial mines, tunnels, etc.
4.Farms, Smart Agriculture and Animal Husbandry
Specifications
| Parameter type | Parameter index | |
| Detection Type | H2S Gas | |
| Detection Principle | Three-electrode electro-chemical | |
| Detection Range | 0～10PPM | |
| Max Load | 500PPM | |
| Detection Accuracy | Solution | 0.1ppm |
| Data Accuracy | Max error ≤2% Reading | |
| Operation Voltage | DC 3.7V～5.5V | |
| Operation Current | ≤0.3mA (@5V power supply) | |
| Warm-up Time | 3 min | |
| Detection Frequency | The data is updated once per second (Default) | |
| Output Methods | Default: UART (3.3V_TTL Voltage level) | |
| Reserve: MODBUS-RS485 | ||
| Customizable: 4~20mA、0~5V、0~10V | ||
| Service Life | 2 Years (in the air) | |
| Reference Dimension | 32.3×32.3×16.5 mm | |
| Operation Temperature | -10℃～ 50℃ | |
| Operation Humidity | 0～95%RH (Non-Condensation) | |
| Storage Temperature | -20℃～ 60℃ | |
| Storage Humidity | 0～95%RH (Non-Condensation) | |
| Pressure Range | 800~1200 mbar | |
Inquiry - Fosensor Electrochemical H2S Hydrogen Sulfide Gas Sensor Module FS01701
