Name: ZADETECTOR Low-power infrared methane gas sensor
Brand: ZADETECTOR
Availability: InStock

ZADETECTOR Low-power infrared methane gas sensor

ZADETECTOR Low-power infrared methane gas sensor

Brand: ZADETECTOR

Category: Testing Instruments

Description

Specifications

SKU: ZADETECTOR Low-power infrared methane gas sensor

Detected gases	methane, isobutane
Detection principle	Non-dispersive infrared absorption (NDIR)
Detection range	Methane: 0 - 5% VOL; Isobutane: 0 - 1.8% VOL
Measurement error	±3% LEL
Operating voltage	3.0V - 5.0V (3.3V recommended)

The NDIR sensor is based on the Beer-Lambert law and uses an LED narrow-band light source and a fast-response photodiode (PD). Combined with a low-power circuit and an optimized optical system, it achieves ultra-low power consumption while meeting the performance of conventional NDIR infrared sensors. On the one hand, it can reduce the node load and increase the loading quantity of the bus-type gas detection equipment. In addition, it is more suitable for battery-powered portable products and wireless gas detection equipment. Compared with the traditional solution, it can monitor gas leakage in real time without the need for long-term pulsed intermittent work, and is safer and more reliable.

Functions Features

Henan Zhong An Electronic Detection Technology CO.,LTD.

Technical Parameters

Detected gases	methane, isobutane
Detection principle	Non-dispersive infrared absorption (NDIR)
Detection range	Methane: 0 - 5% VOL; Isobutane: 0 - 1.8% VOL
Measurement error	±3% LEL
Operating voltage	3.0V - 5.0V (3.3V recommended)
Average power	< 3.3mW (average power consumption 3.3V, 1mA)
Operating temperature	-40℃ to +70℃
Operating humidity	0 - 98% RH
Warm-up time	30s
Response time	T90 < 20s
Communication interface	UART, 1Hz (maximum)
Optical mirror	Gold-plated film
Sensor life	5 years
Protection level	IP54
Intrinsic safety parameters	Ui = 5V, Ii = 400mA, Ci = 38μF, Li = 0mH, Pi = 0.5W