Share:


FUZRR ES9010 lightning Protection Special Standard Resistor

Specifications

SKU: FUZRR ES9010 lightning Protection Special Standard Resistor

The ES9010 standard resistor is composed of nine 1/2W high-precision Seiko-grade wirewound resistor series. It is a four-wire standard resistor. It does not need to change the wire for direct shifting. It is easy to carry and replace the traditional BZ3 and other single resistors. The highest accuracy is 0.05%. It is a standard resistor specially customized by our company. Its resistance values include 1mΩ, 10mΩ, 100mΩ, 1Ω, 10Ω, 100Ω, 1KΩ, 10KΩ, 100KΩ, which fully complies with Order No. 31 “Lightning Protection Device Testing Qualification Management Measures” The range of 10-3~105 specified in . Mainly used for the calibration of ground resistance testers, equipotential testers and other instruments.



ES9010 Standard Resistor

  • ★ Resistance value: 1mΩ, 10mΩ, 100mΩ, 1Ω, 10Ω, 100Ω, 1kΩ, 10kΩ, 100kΩ
  • ★ Military grade wirewound resistor
  • ★ Direct shifting does not require line change
  • ★ Easy to carry
  • ★ The highest precision is 0.05%
PRODUCT INTRODUCTION

ES9010 standard resistor consists of 9 1/2W high-precision military-grade wirewound resistor series to form a four-wire standard resistor. Direct shifting does not need to change the line. It is convenient to carry and replace the traditional BZ3 and other single resistors to carry the problem of inconvenient switching of different resistors. The highest accuracy is 0.05%. It is a standard resistor specially customized by us. It is mainly used for the calibration of grounding resistance tester, equipotential tester and other instruments.

TECHNICAL PARAMETERS
Range Accuracy (%) Temperature coefficient (ppm)
0.001Ω 2 ±25
0.01Ω 0.5
0.1Ω 0.2
1.0Ω 0.2
10Ω 0.05
100Ω 0.05
1kΩ 0.05
10kΩ 0.05
100kΩ 0.1
Basic condition: 23℃±1℃ 50~60%RH
Function Used for the calibration of instruments such as grounding resistance tester and equipotential tester
Range 1mΩ, 10mΩ, 100mΩ, 1Ω, 10Ω, 100Ω, 1kΩ, 10kΩ, 100kΩ
Accuracy 0.05%
Wiring method Four-wire method
Capacity factor 1/2W
Coefficient ±25ppm
Size L/W/T: 187 × 119 × 48mm
Test line length Red 0.5m, black 0.5m each 2PCS
Weight 550g
Working temperature and humidity -10℃~40℃; below 70%rh
Storage temperature and humidity -20℃~60℃; below 80%rh
Insulation resistance More than 10MΩ (Between circuit and case 500V)
Pressure resistance AC 3700V/rms (Between circuit and case)
Suitable for Safety Regulations IEC61010-1, CAT III 600V, Pollution Degree 2, JJG724-1991, JJG166-1993
IP IP45


 

 Inquiry - FUZRR ES9010 lightning Protection Special Standard Resistor