Share:
DATATEST DT-THBXA LCD Display Temperature and Humidity Transmitter
Brand: DATATEST
Category:
Testing Instruments
Specifications
SKU: DATATEST DT-THBXA LCD Display Temperature and Humidity Transmitter
Brief introduction:
The DT-THBXA type temperature and humidity transmitter with LCD display uses an imported temperature and humidity sensor probe to measure the temperature and humidity in the air. It is widely used in computer rooms, factory workshops, library and archive management, laboratories, and other places that require temperature and humidity measurement and control.
Details:
I. Product Overview
The DT-THBXA type temperature and humidity transmitter with LCD display uses an imported temperature and humidity sensor probe to measure the temperature and humidity in the air. It is widely used in computer rooms, factory workshops, library and archive management, laboratories, and other places that require temperature and humidity measurement and control.
II. Features of LCD Display Temperature and Humidity Transmitters
Ø Wall-mounted/ceiling-mounted design, easy to install.
Ø Large LCD screen design, lightweight and beautiful.
High precision and good consistency.
Ø Standard current signal output of 4～20mA.
Ø Linear response, integrated temperature and humidity control.
Ø Uses quick-connect terminals, safe and reliable.
III. Main Technical Parameters
IV. External Dimensions
LCD display temperature and humidity transmitter dimensions: 95*80*29.5mm
VIII. Quality Assurance
The warranty period is 12 months. During the warranty period, free factory maintenance services will be provided for the product based on normal use and non-human-caused damage.
IX. Installation Method and Precautions
1. During installation, a PVC terminal should be used to transition the connection between the cable tray end and the sensor base. To ensure that the cable tray and the sensor are installed on the same axis, it is recommended to install the base first, and then nail the cable tray.
2. The horizontal distance from the sensor to the air conditioner vent should be greater than 1.5m, and the distance to the ceiling vent should be greater than 0.5m.
3. To prevent cold air under the isolation floor from affecting the actual test of the sensor through the cable tray, it is best to add a PVC terminal head to the port of the cable tray, or install the sensor on the side of the cable tray.
The DT-THBXA type temperature and humidity transmitter with LCD display uses an imported temperature and humidity sensor probe to measure the temperature and humidity in the air. It is widely used in computer rooms, factory workshops, library and archive management, laboratories, and other places that require temperature and humidity measurement and control.
II. Features of LCD Display Temperature and Humidity Transmitters
Ø Wall-mounted/ceiling-mounted design, easy to install.
Ø Large LCD screen design, lightweight and beautiful.
High precision and good consistency.
Ø Standard current signal output of 4～20mA.
Ø Linear response, integrated temperature and humidity control.
Ø Uses quick-connect terminals, safe and reliable.
III. Main Technical Parameters
| Rated voltage | DC12V (DC12V~DC24V) |
| Measurement range | Temperature: 0℃~50℃ Humidity: 0～100%rh |
| Measurement accuracy | Temperature: ±0.5℃ at 25℃ Humidity: ±3% RH at 25℃ |
| Output | Humidity: 4～20mA =0…100%rh Temperature: 4～20mA =0…50℃ |
| Base terminal | (1) System power supply + line (2) System power supply line/signal ground - temperature output (3) Humidity output |
| Large load resistance | (VS-9)/20mA ohms |
| Installation method | Interior wall mounting, ceiling mounting |
| Storage environment | -20℃～80℃ (non-condensing) |
| Material | Fire-retardant ABS resin |
LCD display temperature and humidity transmitter dimensions: 95*80*29.5mm
VIII. Quality Assurance
The warranty period is 12 months. During the warranty period, free factory maintenance services will be provided for the product based on normal use and non-human-caused damage.
IX. Installation Method and Precautions
1. During installation, a PVC terminal should be used to transition the connection between the cable tray end and the sensor base. To ensure that the cable tray and the sensor are installed on the same axis, it is recommended to install the base first, and then nail the cable tray.
2. The horizontal distance from the sensor to the air conditioner vent should be greater than 1.5m, and the distance to the ceiling vent should be greater than 0.5m.
3. To prevent cold air under the isolation floor from affecting the actual test of the sensor through the cable tray, it is best to add a PVC terminal head to the port of the cable tray, or install the sensor on the side of the cable tray.
Brief introduction:
The DT-THBXA type temperature and humidity transmitter with LCD display uses an imported temperature and humidity sensor probe to measure the temperature and humidity in the air. It is widely used in computer rooms, factory workshops, library and archive management, laboratories, and other places that require temperature and humidity measurement and control.
Details:
I. Product Overview
The DT-THBXA type temperature and humidity transmitter with LCD display uses an imported temperature and humidity sensor probe to measure the temperature and humidity in the air. It is widely used in computer rooms, factory workshops, library and archive management, laboratories, and other places that require temperature and humidity measurement and control.
II. Features of LCD Display Temperature and Humidity Transmitters
Ø Wall-mounted/ceiling-mounted design, easy to install.
Ø Large LCD screen design, lightweight and beautiful.
High precision and good consistency.
Ø Standard current signal output of 4～20mA.
Ø Linear response, integrated temperature and humidity control.
Ø Uses quick-connect terminals, safe and reliable.
III. Main Technical Parameters
IV. External Dimensions
LCD display temperature and humidity transmitter dimensions: 95*80*29.5mm
VIII. Quality Assurance
The warranty period is 12 months. During the warranty period, free factory maintenance services will be provided for the product based on normal use and non-human-caused damage.
IX. Installation Method and Precautions
1. During installation, a PVC terminal should be used to transition the connection between the cable tray end and the sensor base. To ensure that the cable tray and the sensor are installed on the same axis, it is recommended to install the base first, and then nail the cable tray.
2. The horizontal distance from the sensor to the air conditioner vent should be greater than 1.5m, and the distance to the ceiling vent should be greater than 0.5m.
3. To prevent cold air under the isolation floor from affecting the actual test of the sensor through the cable tray, it is best to add a PVC terminal head to the port of the cable tray, or install the sensor on the side of the cable tray.
The DT-THBXA type temperature and humidity transmitter with LCD display uses an imported temperature and humidity sensor probe to measure the temperature and humidity in the air. It is widely used in computer rooms, factory workshops, library and archive management, laboratories, and other places that require temperature and humidity measurement and control.
II. Features of LCD Display Temperature and Humidity Transmitters
Ø Wall-mounted/ceiling-mounted design, easy to install.
Ø Large LCD screen design, lightweight and beautiful.
High precision and good consistency.
Ø Standard current signal output of 4～20mA.
Ø Linear response, integrated temperature and humidity control.
Ø Uses quick-connect terminals, safe and reliable.
III. Main Technical Parameters
| Rated voltage | DC12V (DC12V~DC24V) |
| Measurement range | Temperature: 0℃~50℃ Humidity: 0～100%rh |
| Measurement accuracy | Temperature: ±0.5℃ at 25℃ Humidity: ±3% RH at 25℃ |
| Output | Humidity: 4～20mA =0…100%rh Temperature: 4～20mA =0…50℃ |
| Base terminal | (1) System power supply + line (2) System power supply line/signal ground - temperature output (3) Humidity output |
| Large load resistance | (VS-9)/20mA ohms |
| Installation method | Interior wall mounting, ceiling mounting |
| Storage environment | -20℃～80℃ (non-condensing) |
| Material | Fire-retardant ABS resin |
LCD display temperature and humidity transmitter dimensions: 95*80*29.5mm
VIII. Quality Assurance
The warranty period is 12 months. During the warranty period, free factory maintenance services will be provided for the product based on normal use and non-human-caused damage.
IX. Installation Method and Precautions
1. During installation, a PVC terminal should be used to transition the connection between the cable tray end and the sensor base. To ensure that the cable tray and the sensor are installed on the same axis, it is recommended to install the base first, and then nail the cable tray.
2. The horizontal distance from the sensor to the air conditioner vent should be greater than 1.5m, and the distance to the ceiling vent should be greater than 0.5m.
3. To prevent cold air under the isolation floor from affecting the actual test of the sensor through the cable tray, it is best to add a PVC terminal head to the port of the cable tray, or install the sensor on the side of the cable tray.
Inquiry - DATATEST DT-THBXA LCD Display Temperature and Humidity Transmitter
View more
Testing Instruments
