3
Share:
ERANNTEX BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector
Brand: ERANNTEX
Specifications
SKU: ERANNTEX BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector
BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector
The Eranntex BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector offers three display modes: simultaneous display of six gas concentration channels, large-font looping display of a single channel, and real-time curve analysis. Channels support automatic or manual switching. Users can customize the display of maximum, minimum, or average values and choose between real-time and timed monitoring modes. The alarm system supports multi-dimensional alarm modes, including audio, visual, and vibration. It covers three types of alarm trigger mechanisms: concentration threshold, undervoltage, and equipment failure. It offers four alarm modes: low limit, high limit, interval, and weighted average. The system comes standard with a factory reset function, uses automatic zero-point tracking technology to suppress long-term drift, supports a multi-level calibration process, and automatically intercepts incorrect concentration calibration operations. Optional temperature and humidity monitoring modules and RS485 communication interfaces are available, allowing customization of additional functions or communication protocols. OEM/ODM services are also available.
The Eranntex BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector technical parameters
|
Parameter |
Description |
|
Detected Gases |
Toxic gases, oxygen, carbon dioxide, flammable/explosive gases, TVOC, etc. Supports flexible combination of 1–6 gases (expandable to 8 based on sensors). Optional: temperature/humidity/pressure measurement. |
|
Detection Range |
0–1/10/100/1000/5000/50000 ppm (mg/m³); 0–100%LEL; 0–200mg/L; 0–20%/50%/100%VOL; customizable ranges available. |
|
Resolution |
0.001/0.01/0.1/1 ppm; 0.1%LEL; 0.1mg/L; 0.01/0.001%VOL; customizable resolutions. |
|
Detection Principle |
Electrochemical, catalytic combustion, infrared, thermal conductivity, semiconductor, zirconia, PID photoionization, laser TDLAS (selected based on gas type, range, environment, and user requirements). |
|
Typical Accuracy |
≤±1% F.S (higher precision customizable). |
|
Linearity |
≤±1% |
|
Repeatability |
≤±1% |
|
Uncertainty |
≤±1% |
|
Response Time |
T90 ≤30 sec |
|
Recovery Time |
≤30 sec |
|
Operating Environment |
Temperature: -20°C to +55°C (standard), -40°C to +70°C (extreme); Humidity ≤95% RH (non-condensing). Optional high-temperature sampling handle for harsher conditions. |
|
Temp/Humidity Measurement (Optional) |
Temp: -40°C~+70°C (±0.5°C); Humidity: 0–100% RH (±3% RH). |
|
Power Supply |
3.7VDC, 6000mAh rechargeable polymer battery. |
|
Display |
2.5-inch 320*240 color screen with 8-button operation. |
|
Detection Method |
Built-in pump suction (500 mL/min flow rate). |
|
Communication |
USB (charging & data), optional RS485, infrared. |
|
Data Storage |
100,000 records standard (expandable). |
|
IP Rating |
IP67. |
|
Explosion Proof |
ExiaⅡC T4 Ga; ExiaD20 T130℃ intrinsically safe. |
|
Dimensions |
195×77×46mm (H×L×W). |
|
Weight |
500g (varies by sensor configuration). |
|
Standard Accessories |
Manual, certificate, warranty card, clip, USB charger (with cable), filter, aluminum alloy case. |
|
Optional Features |
Pressure monitoring, fall alarm, Bluetooth/WiFi/LoRa/4G/5G wireless, SOS button, linked alarms, wind speed. |
|
Optional Accessories |
0.9m retractable / 0.4m stainless steel probes (with sintered filters), Bluetooth printer, high-temperature/high-humidity handles, leather case. |
|
Applications |
Oil, chemical, pharmaceutical, environmental, gas distribution, warehousing, flue gas analysis, air quality monitoring – all scenarios requiring portable gas detection. |
The Eranntex BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector display interface:
All-in-one interface
single gas interface
curve display interface
The Eranntex BTYQ-MS600-6X Portable composite gas detector actual picture
The Eranntex BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector optional accessories: (Optional accessories require additional charges)
High humidity filter
40cm/120cm metal sampling handle
telescopic sampling handle
High-temperature sampling handle
(0.3m 400°C/0.7m 800°C/1.2m 1300°C; three sizes available)
List of some detectable gases (please consult sales engineers for gases not listed)
|
Detected Gas |
Detection Range |
|
Combustible Gas (EX) |
0–100%LEL, 0–100%Vol |
|
Methane (CH4) |
0–100%LEL, 0–100%Vol, 0–1000ppm, 0–10000ppm |
|
Oxygen (O2) |
0–30%Vol, 0–100%Vol, 0–5000ppm |
|
Nitrogen (N2) |
0–100%Vol |
|
Carbon Monoxide (CO) |
0–100ppm, 0–1000ppm, 0–2000ppm, 0–20000ppm, 0–100000ppm |
|
Carbon Dioxide (CO2) |
0–500ppm, 0–2000ppm, 0–5000ppm, 0–50000ppm, 0–20%Vol, 0–100%Vol |
|
Formaldehyde (CH2O) |
0–10ppm, 0–100ppm, 0–1000ppm |
|
Ozone (O3) |
0–1ppm, 0–5ppm, 0–50ppm, 0–100ppm, 0–2000ppm, 0–30000ppm |
|
Hydrogen Sulfide (H2S) |
0–10ppm, 0–50ppm, 0–100ppm, 0–2000ppm, 0–10000ppm |
|
Sulfur Dioxide (SO2) |
0–10ppm, 0–20ppm, 0–100ppm, 0–500ppm, 0–2000ppm, 0–10000ppm |
|
Nitric Oxide (NO) |
0–10ppm, 0–100ppm, 0–2000ppm, 0–5000ppm |
|
Nitrogen Dioxide (NO2) |
0–10ppm, 0–100ppm, 0–2000ppm, 0–5000ppm |
|
Nitrogen Oxides (NOX) |
0–10ppm, 0–100ppm, 0–2000ppm, 0–5000ppm |
|
Chlorine (Cl2) |
0–10ppm, 0–20ppm, 0–200ppm, 0–2000ppm |
|
Ammonia (NH3) |
0–10ppm, 0–100ppm, 0–1000ppm, 0–5000ppm, 0–100%LEL |
|
Hydrogen (H2) |
0–100%LEL, 0–1000ppm, 0–20000ppm, 0–40000ppm, 0–100%Vol |
|
Helium (He) |
0–100%Vol |
|
Argon (Ar) |
0–100%Vol |
|
Xenon (Xe) |
0–100%Vol |
|
Hydrogen Cyanide (HCN) |
0–30ppm, 0–100ppm |
|
Hydrogen Chloride (HCl) |
0–20ppm, 0–200ppm |
|
Phosphine (PH3) |
0–10ppm, 0–100ppm, 0–1000ppm, 0–4000ppm |
|
Chlorine Dioxide (ClO2) |
0–1ppm, 0–10ppm, 0–200ppm |
|
Ethylene Oxide (ETO) |
0–100ppm, 0–1000ppm, 0–100%LEL |
|
Phosgene (COCl2) |
0–1ppm, 0–50ppm |
|
Silane (SiH4) |
0–1ppm, 0–50ppm |
|
Fluorine (F2) |
0–1ppm, 0–10ppm, 0–50ppm |
|
Hydrogen Fluoride (HF) |
0–10ppm, 0–50ppm |
|
Hydrogen Bromide (HBr) |
0–50ppm |
|
Diborane (B2H6) |
0–10ppm |
|
Arsine (AsH3) |
0–1ppm, 0–10ppm, 0–50ppm |
|
Germane (GeH4) |
0–2ppm, 0–20ppm |
|
Hydrazine (N2H4) |
0–1ppm, 0–300ppm |
|
Tetrahydrothiophene (THT) |
0–100mg/m³ |
|
Bromine (Br2) |
0–10ppm, 0–100ppm, 0–2000ppm |
|
Acetylene (C2H2) |
0–100%LEL, 0–100ppm, 0–1000ppm |
|
Ethylene (C2H4) |
0–100%LEL, 0–100ppm, 0–2000ppm |
|
Ethanol (C2H6O) |
0–100ppm, 0–2000ppm, 0–100%LEL |
|
Methanol (CH4O) |
0–100ppm, 0–2000ppm |
|
Carbon Disulfide (CS2) |
0–50ppm, 0–5000ppm |
|
Acrylonitrile (C3H3N) |
0–50ppm, 0–2000ppm |
|
Methylamine (CH5N) |
0–50ppm |
|
Iodine (I2) |
0–50ppm |
|
Styrene (C8H8) |
0–10ppm, 0–100ppm, 0–200ppm, 0–1000ppm, 0–5000ppm |
|
Vinyl Chloride (C2H3Cl) |
0–100ppm, 0–1000ppm |
|
Trichloroethylene (C2HCl3) |
0–100ppm, 0–1000ppm |
|
Tetrachloroethylene (C2Cl4) |
0–100ppm, 0–1000ppm |
|
Nitrous Oxide (N2O) |
0–100ppm |
|
Nitrogen Trifluoride (NF3) |
0–100ppm |
|
Hydrogen Peroxide (H2O2) |
0–100ppm, 0–1000ppm |
|
Methyl Bromide (CH3Br) |
0–100ppm, 0–30000ppm, 0–200g/m³ |
|
Sulfuryl Fluoride (SO2F2) |
0–100ppm, 0–5000ppm, 0–10000ppm |
|
Benzene (C6H6) |
0–10ppm, 0–100ppm, 0–1000ppm, 0–10000ppm |
|
Toluene (C7H8) |
0–10ppm, 0–100ppm, 0–1000ppm, 0–10000ppm |
|
Xylene (C8H10) |
0–10ppm, 0–100ppm, 0–1000ppm, 0–10000ppm |
|
VOC |
0–10ppm, 0–100ppm, 0–1000ppm, 0–10000ppm |
|
TVOC |
0–10ppm, 0–100ppm, 0–1000ppm, 0–10000ppm |
|
Non-Methane Hydrocarbons (CxHy) |
0–10ppm, 0–100ppm, 0–1000ppm, 0–10000ppm |
|
Refrigerant |
0–1000ppm, 0–2000ppm, 0–5000ppm |
|
Sulfur Hexafluoride (SF6) |
0–1000ppm, 0–2000ppm, 0–3000ppm |
Inquiry - ERANNTEX BTYQ-MS600 Portable Pump-Suction 6-in-1 Gas Detector
