Share:
Specifications
SKU: ERANNTEX Online Infrared Oil and Gas Detector
The Eranntex GTYQ-MIC-500S-CxHy Online infrared oil and gas detector offers a variety of wireless data transmission options, including 433M, LoRa, Wi-Fi, 4G/5G, and NB-IoT. Connect to a computer using the accompanying software to view real-time concentration data from the on-site probe. Data can be easily stored, analyzed, and printed. Measurement units are switchable, the instrument maintains zero, and calibration can be performed at multiple target points. OEM and ODM customization is also available for special requirements.
The Eranntex MIC-500S-CxHy Online infrared oil and gas detector Technical Parameters：
|
Detected Gas |
Gasoline Volatile Gas |
||||
|
Detection Range |
0-100g/m³(Other ranges available) |
||||
|
Resolution |
0.01g/m³ |
||||
|
Detection Principle |
NDIR Infrared |
||||
|
Typical Accuracy |
≤±3% F.S. (Higher accuracy available on request) |
||||
|
Linearity |
≤±2% |
Repeatability |
≤±2% |
Uncertainty |
≤±2% |
|
Response Time |
T90≤30s |
Recovery time |
≤30s |
||
|
Signal Output |
RS485 bus (RTU), three-, two-, or four-wire, 4-20mA; optional: 0-20mA, 1-5V, 0-5V, 0-10V. |
||||
|
Operating Environment |
Ambient temperature: -20°C to +55°C (typical), -40°C to +70°C (maximum). |
||||
|
Operating Voltage |
(Preconditioning system optional for higher temperatures and humidity requirements). |
||||
|
Power Reference |
12-36VDC. The standard power supply for a single device is a 24V, 1A or greater DC regulated switching power supply. |
||||
|
Operating Mode |
A 24V, 2.1A switching power supply can power 40 toxic gas detectors or 15 flammable and infrared gas detectors. |
||||
|
Mounting Method |
Fixed installation, online detection, diffusion measurement; Optional duct, flow-through, and pump-type measurement. |
||||
|
Alarm Mode |
Duct and wall-mount versions available. The operating pressure for pipelines is atmospheric pressure±30%. Pressure reduction is required if the pressure exceeds this range. The default is one passive contact output (dry contact), with two optional outputs. Three alarm levels are available, with configurable alarm points. An on-site audible and visual alarm is optional. For 4-20mA, use a three-core shielded cable. For RS485, use a four-core shielded cable. For distances exceeding 1000 meters, the single wire diameter must be≥1.5mm; the shield must be grounded. IP65 Explosion-proof ExdbⅡC T6 Gb/ExtbIIICT80°C Db. 238×152×90 mm (H×L×W) without light. 238×210×90 mm (H×L×W) with light. |
||||
|
Connecting Cable |
RS485 bus (RTU), three-, two-, or four-wire, 4-20mA; optional: 0-20mA, 1-5V, 0-5V, 0-10V. |
||||
|
Protection Rating |
Ambient temperature: -20°C to +55°C (typical), -40°C to +70°C (maximum). |
||||
|
Explosion-Proof Rating |
(Preconditioning system optional for higher temperatures and humidity requirements). |
||||
|
Dimensions |
12-36VDC. The standard power supply for a single device is a 24V, 1A or greater DC regulated switching power supply. |
||||
|
Weight |
1.4/1.6 kg (custom orders subject to actual weight). |
||||
|
Standard Accessories |
Instruction manual, certificate of conformity, warranty card, infrared remote control, outer packaging box. |
||||
|
Optional Accessories |
Integrated alarm light, power adapter, split alarm light, dryer cartridge, flow-through connector, threaded weld base, AC pump, DC brushless pump, built-in pump, rain cover, moisture filter, U-shaped clip, 304/316L stainless steel chamber, split-type. |
||||
|
Optional Pretreatment System |
TH-1000 (simple outdoor model), TH-2000 (for high temperature and high humidity environments). |
||||
|
Applications |
Applications requiring fixed installation and online gas concentration monitoring, including petroleum, chemical, pharmaceutical, environmental protection, gas distribution, warehousing, flue gas analysis, and air treatment. |
||||
Inquiry - ERANNTEX Online Infrared Oil and Gas Detector
