Share:
Specifications
SKU: ERANNTEX Online Sulfur Hexafluoride Detector
The Eranntex GTYQ-MIC-500S-SF6 Online sulfur hexafluoride detector supports multiple wireless transmission methods, including 433M, LoRa, Wi-Fi, 4G/5G, and NB-IoT. For computer monitoring, simply connect the device to a computer and run the software to view real-time concentration data from the on-site detector. The data can also be saved, analyzed, or printed directly on the computer. Measurement units are switchable, the instrument automatically tracks its zero point to prevent reading drift, and supports multi-level target point calibration to ensure measurement accuracy. The manufacturer also offers OEM and ODM customization services, tailored to your specific needs.
The Eranntex GTYQ-MIC-500S-SF6 Online sulfur hexafluoride detector Technical Parameters：
|
Detected Gas |
Sulfur hexafluoride (SF6) |
||||
|
Detection Range |
0-100, 500, 1000, 3000, 5000, 10000 ppm; 0-10%, 50%, 100% Vol; other ranges available |
||||
|
Resolution |
0.1ppm, 1ppm; 0.01% Vol, 0.001% Vol; other resolutions available on request |
||||
|
Detection Principle |
Conventional infrared, German Smartgas, and Italian NET infrared available |
||||
|
Typical Accuracy |
≤±3% F.S. (Higher accuracy available on request) |
||||
|
Linearity |
≤±2% |
Repeatability |
≤±2% |
Uncertainty |
≤±2% |
|
Response Time |
T90≤30s |
Recovery time |
≤30s |
||
|
Signal Output |
RS485 bus (RTU), three-, two-, or four-wire, 4-20mA; optional: 0-20mA, 1-5V, 0-5V, 0-10V. |
||||
|
Operating Environment |
Ambient temperature: -20°C to +55°C (typical), -40°C to +70°C (maximum). |
||||
|
Operating Voltage |
(Preconditioning system optional for higher temperatures and humidity requirements). |
||||
|
Power Reference |
12-36VDC. The standard power supply for a single device is a 24V, 1A or greater DC regulated switching power supply. |
||||
|
Operating Mode |
A 24V, 2.1A switching power supply can power 40 toxic gas detectors or 15 flammable and infrared gas detectors. |
||||
|
Mounting Method |
Fixed installation, online detection, diffusion measurement; Optional duct, flow-through, and pump-type measurement. |
||||
|
Alarm Mode |
Duct and wall-mount versions available. The operating pressure for pipeline models is atmospheric pressure±30%. Pressure reduction is required if the range is exceeded. The default is one passive contact (dry contact) output, with two optional outputs. Three alarm levels are available, with configurable alarm points. An on-site audible and visual alarm is optional. For 4-20mA, use a three-core shielded cable. For RS485, use a four-core shielded cable. For distances exceeding 1000 meters, the single wire diameter must be≥1.5mm; the shield must be grounded. IP65. Flameproof: ExdbⅡC T6 Gb/ExtbIIICT80°C Db. 238×152×90mm (H×L×W) without light. 238×210×90mm (H×L×W) with light. 1.4/1.6 kg. Actual weight is subject to change for custom orders. |
||||
|
Connecting Cable |
Instruction manual, certificate of conformity, warranty card, infrared remote control, outer packaging box. |
||||
|
Protection Rating |
Integrated alarm light, power adapter, split alarm light, dryer cartridge, flow-through connector, threaded weld base, AC pump, DC brushless pump, built-in pump, rain cover, moisture filter, U-shaped clip, 304/316L stainless steel chamber, split-type. |
||||
|
Explosion-Proof Rating |
TH-1000 (simple outdoor model), TH-2000 (for high temperature and high humidity environments). |
||||
|
Dimensions |
Suitable for applications requiring fixed installation and online gas concentration monitoring, including petroleum, chemical, pharmaceutical, environmental protection, gas distribution, warehousing, flue gas analysis, and air treatment. |
||||
|
Weight |
RS485 bus (RTU), three-, two-, or four-wire, 4-20mA; optional: 0-20mA, 1-5V, 0-5V, 0-10V. |
||||
|
Standard Accessories |
Ambient temperature: -20°C to +55°C (typical), -40°C to +70°C (maximum). |
||||
|
Optional Accessories |
(Preconditioning system optional for higher temperatures and humidity requirements). |
||||
|
Optional Pretreatment System |
12-36VDC. The standard power supply for a single device is a 24V, 1A or greater DC regulated switching power supply. |
||||
|
Applications |
A 24V, 2.1A switching power supply can power 40 toxic gas detectors or 15 flammable and infrared gas detectors. |
||||
Inquiry - ERANNTEX Online Sulfur Hexafluoride Detector
