Share:
Specifications
SKU: Tohnichi CNA-4mk3 Count checker
The error-proofing (Pokayoke) counter controls the number of tightening operations to prevent human tightening errors.
Features
- Can be connected to LS (Limit Switch) torque wrenches for count management.
- Up to four LS torque wrenches can be connected, and each can be set with a different number of bolts to tighten. So up to four operators can perform tightening tasks at the same time.
- From one unit, the numbers of four different types of bolts to be tightened can be set.
- Bolt counting can be set 0-99 pcs for each torque wrench, and count down upon receiving a signal.
- OK/NG judgement signal can be transferred to external device through relay output.
- Connected with LS type torque wrenches (sold separately), CNA4-mk3 establishes error-proofing system.
Specifications
OK：Blue lamp turned on NG：Red lamp blinking＋Buzzer sounds（4 patterns） |
|
END input judgement Automatic judgement (0 to 300 seconds in steps of 1 second) |
|
RESET input WORK SENSOR input |
|
Automatic reset timer (0 to 60 seconds in steps of 1 second) Interval warning timer (0 to 99 seconds in steps of 1 second) |
|
Inquiry - Tohnichi CNA-4mk3 Count checker
