3
Share:
Specifications
SKU: Otywell R-4OX Industrial Oxygen Sensor
R-4OX Industrial Oxygen Sensor
Description
Functions Features
- Good stability
- High precision
- Fast response speed
- Anti-cross interference
- Linear optimization
- Strong adaptability
Technical Parameters
Lifetime Details
| Long Term Output Drift | < 5% per annum |
| Recommended Storage Temp | 0℃to 20℃ |
| Expected Operating Life | > 24 months in air |
| Standard Warranty | 24 months from date of dispatch |
Intrinsic Safety Data
| Maximum current in normal operation (pure O2) | 0.01 A |
| Maximum o/c Voltage (10 to 100% O2) | 0.9 V |
| Maximum s/c Current (10 to 100% O2) | 0.5 A |
Erformance Characteristics
| Output signal | 0.10 ± 0.03 mA |
| Zero Current (Offset) | < 0.6% vol. O2 |
| T90 Response Time | < 15 seconds |
| Measurement Range | 0 – 25% Oxygen |
| Maximum Overload | 30% Oxygen |
| Linearity | Linear |
| Recommended Load Resistor | 100 ohms |
Environmental Details
| Temperature Range Continuous | -30℃to +50℃ |
| Pressure Range | 800 to 1200 mbar |
| Operating Humidity Range | 5% to 95% RH |
Toxic gases at TLV levels will have no cross-sensitivity effect on oxygen sensors. At very high levels (i.e. percent levels), highly oxidising gases (e.g. ozone, chlorine) will interfere to the extent of their oxygen equivalent, but most other commonly occurring gases will have no effect.
Important Note:
Acid gases such as CO2 and SO2 will be absorbed by the electrolyte and tend to increase the flux of oxygen to the electrode. This gives an enhanced oxygen signal of approximately 0.3% of signal per 1% CO2.Oxygen sensors are not suitable for continuous operation in concentrations of CO2 above 25%.
All performance data is based on conditions at 20℃, 50%RH and 1 atm, using recommended circuitry.
Sensor performance is temperature dependent, and please Contact us for temperature performance other than 20℃.
TAG: otywell gas sensor，O2 sensor ，H2S sensor，CO sensor
Inquiry - Otywell R-4OX Industrial Oxygen Sensor
