Wintact WT-100A Ultrasonic Thickness Gauge for Steel Fabrication and Quality Control Malaysia
Wintact WT-100A Ultrasonic Thickness Gauge for Steel Fabrication and Quality Control Malaysia
Copy Link
Steel fabrication companies need reliable methods to verify material thickness during incoming inspection, fabrication, production and quality control. Measuring thickness accurately can help confirm that steel plates and fabricated components meet project or production requirements.
The Wintact WT-100A Ultrasonic Thickness Gauge offers a portable and non-destructive method for measuring the thickness of suitable materials from one accessible side.
For steel fabricators, engineering workshops and manufacturing companies in Malaysia, it can be a practical instrument for routine thickness verification and quality-control work.
Why Measure Thickness in Steel Fabrication?
Material thickness can be important throughout the fabrication process.
Typical reasons for checking thickness include:
Incoming material verification
Steel plate inspection
Fabrication quality control
Component verification
Maintenance inspection
Checking existing structures
Monitoring material loss
Confirming materials before fabrication
A thickness gauge gives the operator a numerical measurement instead of relying only on labels, drawings or visual assessment.
Why Use Ultrasonic Thickness Measurement?
Traditional tools such as vernier calipers and micrometers are highly useful when technicians can access the edges or both sides of a component.
However, this is not always possible.
For example, technicians may need to measure:
A large steel plate away from its edge
An installed steel component
A pipe wall
A fabricated tank
An enclosed structure
Existing machinery
Ultrasonic measurement can be useful because suitable components can generally be measured from only one accessible surface.
How the Wintact WT-100A Works
The WT-100A uses ultrasonic technology.
The probe sends an ultrasonic signal through the material. The instrument uses the returning signal and the selected material sound velocity to calculate thickness.
A typical measurement process may include:
Clean the measurement surface.
Select or set the appropriate sound velocity.
Apply suitable ultrasonic couplant.
Position the probe firmly against the material.
Wait for a stable reading.
Record the measured thickness.
Repeat the measurement where necessary.
Correct settings, surface preparation and measurement technique are important for reliable results.
Applications in Steel Fabrication
The WT-100A can be considered for suitable thickness measurement tasks involving:
Steel plates
Stainless steel components
Pipes
Fabricated tanks
Structural components
Machinery parts
Metal containers
Engineering components
Actual suitability depends on material properties, geometry, surface condition and measurement requirements.
Incoming Material Inspection
Imagine that a fabrication company receives multiple steel plates for a project.
Before production begins, the QC team may want to verify the supplied material.
Instead of checking only the plate marking, ultrasonic thickness measurements can be taken at selected locations.
For example:
Specified Thickness: 10 mm
Measurements:
Point A: 10.03 mm
Point B: 10.01 mm
Point C: 10.04 mm
Point D: 10.02 mm
The measurements can then be documented according to the company's QC procedure and applicable tolerances.
WT-100A vs Vernier Caliper
These instruments are not necessarily competitors. They solve different measurement problems.
A vernier caliper is excellent when the measurement surfaces or edges are accessible.
An ultrasonic thickness gauge becomes especially useful when only one side of the material is accessible.
For many fabrication workshops, having both instruments provides greater measurement flexibility.
Quality Control for Finished Components
After fabrication, technicians may also need to verify thickness at selected locations.
Ultrasonic measurement can be useful when the finished component makes conventional mechanical measurement difficult.
Possible examples include:
Fabricated vessels
Tanks
Pipe assemblies
Large steel structures
Installed components
This makes ultrasonic thickness measurement useful not only for maintenance but also for manufacturing and QC applications.
Can WT-100A Measure Through Paint?
This depends on the coating, material, thickness, surface condition and measurement method.
A conventional ultrasonic thickness gauge may include the coating layer in the measurement or produce inconsistent readings under certain conditions.
For critical measurements, technicians should follow the appropriate procedure and understand whether the surface coating needs to be removed.
Do not automatically assume that every painted surface can be measured accurately without preparation.
Who May Need an Ultrasonic Thickness Gauge?
The WT-100A may be useful for:
Steel fabricators
QA/QC personnel
Mechanical contractors
Manufacturing factories
Engineering workshops
Maintenance departments
Inspection companies
Shipyards
Tank fabricators
Pipeline contractors
From Product Inspection to Better Quality Control
An ultrasonic thickness gauge becomes more valuable when measurements are properly recorded.
Instead of simply measuring a component and forgetting the result, QC teams can document:
Component ID → Measurement Location → Required Thickness → Actual Thickness → Date → Inspector
This creates traceable measurement information that can support a more systematic quality-control process.
Looking for an Ultrasonic Thickness Gauge in Malaysia?
MTM Precision supplies ultrasonic thickness gauges and other professional testing and measuring instruments for Malaysian fabrication, manufacturing, engineering, maintenance and inspection applications.
Customers can discuss their material type, approximate thickness and intended application with MTM Precision when selecting a suitable thickness gauge.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
10 Aug 2026
