What Should We Measure for ESG? A Practical ESG Measurement Map for Malaysian Companies
What Should We Measure for ESG? A Practical ESG Measurement Map for Malaysian Companies
One of the first questions Malaysian companies ask when they begin looking at ESG is:
“What exactly are we supposed to measure?”
The answer is not:
Everything.
ESG is much broader than measuring instruments, and different businesses have different environmental, workplace and reporting requirements.
A factory may care about energy, noise, heat and wastewater.
A warehouse may care more about temperature and humidity records.
A contractor may need dust, noise, heat-stress and gas monitoring.
An office may focus on indoor environmental conditions and energy use.
So instead of asking:
“Which ESG meter should we buy?”
start with a measurement map.
There Is No Such Thing as One “ESG Meter”
ESG stands for:
Environmental
Social
Governance
No single instrument measures ESG.
Instead, instruments measure specific physical or environmental parameters that may support parts of an ESG, safety, quality or environmental-management program.
For example:
Energy → Electrical Measurement
Air → IAQ / CO₂ / PM
Water → pH / EC / TDS / Turbidity / DO
Workplace → Noise / Lux / Heat
Safety → Gas Detection
Storage → Temperature / Humidity
Once companies understand this, ESG becomes much easier to translate into practical actions.
ESG Measurement Map
A simple way to think about ESG-related measurement is:
ENVIRONMENTAL
Energy
Measure:
Voltage
Current
Power
Power factor
Energy consumption
Possible instruments:
Clamp Meter
Power Meter
Electrical Data Logger
Air
Measure where relevant:
PM2.5
PM10
CO₂
TVOC
HCHO
Temperature
Humidity
Possible instruments:
IAQ Monitor
PM Monitor
CO₂ Meter
HCHO / TVOC Meter
Environmental Data Logger
Water
Measure according to the application:
pH
Conductivity / EC
TDS
Turbidity
Dissolved Oxygen
Temperature
Possible instruments:
pH Meter
Conductivity Meter
TDS Meter
Turbidity Meter
DO Meter
Multi-Parameter Water Quality Meter
SOCIAL / WORKPLACE
Noise
Possible instrument:
Sound Level Meter
Noise Dosimeter where appropriate
Lighting
Possible instrument:
Lux Meter
Heat
Possible instruments:
WBGT / Heat Stress Meter
Temperature & Humidity Meter
Hazardous Atmosphere
Depending on the identified hazard, measure:
O₂
CO
H₂S
LEL
Other specific gases
Possible instruments:
Multi-Gas Detector
Single-Gas Detector
GOVERNANCE / DATA
Governance itself is not measured by a handheld meter.
But measurement governance can involve:
Instrument identification
Measurement procedures
Data records
Calibration
Traceability
Corrective actions
Historical records
Possible supporting tools include:
Data Loggers
Monitoring Software
Calibration Records
Equipment Registers
This is where the numbers become managed information.
Measurement Map 1 — Energy
Energy is one of the easiest ESG-related areas for many companies to understand because it is directly connected to cost.
Ask:
Where is electricity being consumed?
When is it being consumed?
Which equipment has the highest load?
Did an efficiency improvement actually work?
Possible instruments include:
Clamp Meter
Useful for electrical current measurements and troubleshooting.
Power Meter
Useful when more detailed power information is required.
Electrical Data Logger
Useful when consumption or electrical behaviour needs to be observed over time.
Thermal Camera
Useful for identifying abnormal thermal patterns in electrical or mechanical equipment.
Energy measurement can therefore support:
ESG + Cost Saving + Maintenance
Measurement Map 2 — Indoor Air
Air cannot always be evaluated by smell or appearance.
A room may look clean while environmental parameters are changing.
Depending on the application, companies may monitor:
CO₂
Useful for understanding changes associated with occupancy and ventilation.
PM2.5 / PM10
Useful for particulate monitoring.
TVOC / HCHO
Potentially relevant to certain indoor environments, materials or processes.
Temperature & Humidity
Useful for indoor environmental conditions, storage and facility management.
A multi-parameter IAQ monitor may combine several measurements.
Measurement Map 3 — Water
“Water quality” is not one measurement.
Different applications require different parameters.
pH
Acidity / alkalinity.
EC
Electrical conductivity.
TDS
Total dissolved solids estimate depending on measurement method.
Turbidity
Cloudiness associated with suspended particles.
DO
Dissolved oxygen.
Companies should first identify the water application:
Process water
Wastewater
Treatment
Aquaculture
Laboratory
Environmental monitoring
Then select the appropriate measurement method.
Measurement Map 4 — Workplace Noise
A factory employee may say:
“This machine is very noisy.”
That identifies a possible issue.
But it does not provide a measurement.
A sound level meter provides objective sound-level data.
Possible uses include:
Comparing machines
Checking different work areas
Investigating complaints
Evaluating changes after controls
Formal occupational noise assessment may require specific methods, equipment and competent assessment according to applicable Malaysian requirements.
Measurement Map 5 — Lighting
Human eyes adapt very quickly.
This makes visual judgment unreliable for determining illumination.
A lux meter can be used to measure lighting in:
Offices
Production lines
QC stations
Warehouses
Workshops
Laboratories
Instead of:
“Looks bright enough.”
the company has a number.
Measurement Map 6 — Heat
Heat is particularly relevant in Malaysia.
Potential applications include:
Outdoor work
Construction
Production
Warehouses
Kitchens
Boiler areas
Plant rooms
A normal thermometer measures temperature.
A WBGT / Heat Stress Meter is designed for heat-stress assessment applications where appropriate.
The correct method depends on the purpose of the assessment.
Measurement Map 7 — Hazardous Gas
Gas detection is safety-critical.
Companies should begin with:
Which gas hazard exists?
Not:
Which detector is cheapest?
Depending on the workplace, monitoring may involve:
Oxygen
Carbon monoxide
Hydrogen sulfide
Combustible gases
Other specific toxic gases
A standard four-gas detector is common in some applications, but it is not a universal solution.
Sensor selection should follow the hazard.
Measurement Map 8 — Storage Conditions
Warehouses and storage areas may need monitoring for:
Temperature
Humidity
Other environmental parameters depending on the product
A handheld meter gives a current reading.
A data logger builds historical records.
This distinction becomes important when a customer asks:
“What happened last week?”
or:
“Can you show the last six months of storage data?”
Historical information needs to be collected before it is requested.
Measurement Map 9 — Equipment Condition
ESG and environmental efficiency can also overlap with preventive maintenance.
Companies may investigate:
Abnormal heat
Vibration
Electrical current
Rotational speed
Possible instruments include:
Thermal Imaging Camera
Infrared Thermometer
Vibration Meter
Clamp Meter
Tachometer
Why does this matter?
Poorly operating equipment may contribute to:
Energy waste
Unexpected downtime
Product waste
Maintenance cost
So measurement can support both operational and environmental improvement.
Which Measurements Need Data Logging?
Not everything needs continuous recording.
Use a handheld instrument when the question is:
“What is happening now?”
Consider data logging when the question is:
“What has been happening over time?”
Data logging may be useful for:
Temperature
Humidity
CO₂
Indoor environmental conditions
Energy
Storage monitoring
Other changing process parameters
The monitoring interval should be selected according to the application.
Which Measurements May Need Professional Assessment?
This is an important distinction.
Owning an instrument does not automatically qualify a company to perform every type of formal assessment.
Depending on the requirement, certain measurements may need:
A specific measurement method
A specific instrument specification
A competent person
An accredited laboratory
Regulatory procedures
Examples can include certain formal:
Occupational assessments
Environmental compliance tests
Laboratory analyses
For these applications, companies should confirm the requirement before buying equipment.
A Practical ESG Measurement Map for an SME Factory
A factory could map its needs like this:
ENERGY
→ Clamp Meter / Power Meter
AIR
→ PM / IAQ Monitor
WORKPLACE
→ Sound Level Meter / Lux Meter / Heat Stress Meter
SAFETY
→ Gas Detector where relevant
WATER
→ Appropriate Water Quality Meter
STORAGE
→ Temperature & Humidity Data Logger
MAINTENANCE
→ Thermal Camera / Vibration Meter
RECORDS
→ Data Logging + Calibration / Equipment Records
This does not mean the factory should purchase everything.
It means the factory now knows where to look.
A Practical ESG Measurement Map for an Office
For an office:
AIR
→ CO₂ / IAQ Monitor
COMFORT
→ Temperature & Humidity
LIGHTING
→ Lux Meter
ENERGY
→ Appropriate electrical / energy monitoring
RECORDS
→ Data Logger where continuous monitoring is useful
Much simpler.
A Practical ESG Measurement Map for a Warehouse
For a warehouse:
STORAGE
→ Temperature & Humidity Data Logger
AIR
→ PM / CO₂ where relevant
LIGHTING
→ Lux Meter
ENERGY
→ Electrical Measurement
MAINTENANCE
→ Thermal Camera
Again, the product being stored determines the actual monitoring requirement.
A Practical ESG Measurement Map for Construction
For construction:
DUST
→ PM Monitor
NOISE
→ Sound Level Meter
HEAT
→ WBGT Meter
CONFINED SPACE
→ Appropriate Gas Detector
LIGHT
→ Lux Meter where relevant
ENVIRONMENT
→ Temperature & Humidity Meter
This makes the measurement problem much easier to understand.
Start with Three Questions
If all of this still feels complicated, forget the long list.
Start with only three questions:
1. What can affect our workers, environment, product or energy use?
2. Which of those conditions can or should be measured?
3. Which measurements need records over time?
These three questions can form the beginning of an ESG measurement plan.
Don't Turn ESG into an Instrument Shopping List
This is perhaps the most important point.
The purpose of measurement is not to fill a cupboard with meters.
The purpose is to produce useful information.
A good measurement should help a company:
Understand a condition
Identify a problem
Compare locations
Establish a baseline
Verify an improvement
Maintain a record
Respond to a customer requirement
If the measurement does none of these things, ask why it is being taken.
From ESG Question to Measurement Solution
When a customer asks:
“Do you monitor this?”
the process should become:
What parameter?
↓
What application?
↓
What method?
↓
Spot measurement or logging?
↓
What specification?
↓
What instrument?
↓
How will the result be recorded?
This is how an abstract ESG requirement becomes a practical measurement solution.
ESG Measurement & Monitoring Equipment Malaysia
MTM Precision supplies measurement and monitoring instruments for Malaysian companies, including:
Indoor Air Quality Monitors
CO₂ Meters
PM2.5 / PM10 Monitors
Temperature & Humidity Meters
Temperature & Humidity Data Loggers
Sound Level Meters
Lux Meters
Heat Stress / WBGT Meters
Gas Detectors
pH Meters
Conductivity / TDS Meters
Turbidity Meters
Dissolved Oxygen Meters
Clamp Meters
Power Measurement Instruments
Thermal Imaging Cameras
Vibration Meters
Environmental Data Loggers
Industrial Testing Instruments
You do not need to know which model you need before contacting us.
Tell us:
Your industry
Your application
What your customer is asking for
What parameter needs to be measured
Whether historical records are required
We can help narrow down suitable measuring instruments.
ESG Becomes Easier When You Turn It into Measurements
ESG can sound complicated because it covers many subjects.
But from an instrumentation perspective, the process is much simpler.
Don't ask:
“How do I measure ESG?”
Ask:
“What exactly do I need to measure?”
Air?
Water?
Energy?
Noise?
Heat?
Gas?
Temperature?
Humidity?
Once the parameter is clear, the instrument becomes much easier to identify.
ESG is broad. Measurement is specific. Start with the parameter.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
📱 WhatsApp: +6016-660 7346
Not sure what your company needs to measure for ESG?
Send MTM Precision your industry, application or customer requirement.
We can help break the requirement down into measurable parameters and suitable instrument categories.
Don't search for an “ESG meter.” Find out what needs to be measured.
13 Aug 2026