How to Prove ESG Improvements with Before-and-After Measurement Data
How to Prove ESG Improvements with Before-and-After Measurement Data
A company installs better ventilation.
Another company replaces old lighting.
A factory improves dust extraction.
A warehouse upgrades its air-conditioning system.
A maintenance team repairs an inefficient machine.
After the improvement, management says:
“It is better now.”
But there is an important question:
How do you know?
For Malaysian companies developing ESG, environmental, safety and energy-efficiency programs, one of the most useful measurement concepts is surprisingly simple:
Measure before.
Make the improvement.
Measure again.
This creates before-and-after evidence.
Improvement Without Measurement Is Difficult to Prove
Companies make improvements every day.
Examples include:
Improving ventilation
Installing filtration
Replacing lighting
Reducing noise
Repairing machinery
Improving HVAC
Changing operating schedules
Installing energy-efficient equipment
Improving warehouse conditions
These actions may genuinely improve conditions.
But without baseline measurements, companies may have difficulty showing exactly what changed.
This is why measurement should ideally begin before the improvement.
What Is Baseline Measurement?
A baseline is a reference measurement taken before a change or improvement.
For example:
Before ventilation improvement
CO₂: 1,450 ppm
Then the company improves ventilation.
Afterward:
After ventilation improvement
CO₂: 850 ppm
This does not automatically explain every factor affecting the result.
But now the company has measurable information for comparison.
Without the first measurement, management only knows the final number.
The Basic ESG Improvement Cycle
A simple measurement-based improvement process is:
1. IDENTIFY
What is the problem?
↓
2. MEASURE
What is the current condition?
↓
3. RECORD
Keep the baseline.
↓
4. IMPROVE
Take corrective or improvement action.
↓
5. MEASURE AGAIN
What is the new condition?
↓
6. COMPARE
Did the result improve?
↓
7. CONTINUE MONITORING
Does the improvement remain effective?
This creates:
PROBLEM → DATA → ACTION → DATA → EVIDENCE
Example 1 — Indoor CO₂
Employees complain that a meeting room feels stuffy.
Instead of immediately assuming the cause, the facility team measures indoor conditions.
Before
CO₂ rises significantly during occupied meetings.
Action
Ventilation strategy is reviewed and improved.
After
CO₂ is monitored again under comparable occupied conditions.
Now the company can evaluate whether conditions changed.
Possible instruments:
CO₂ Meter
CO₂ Data Logger
Indoor Air Quality Monitor
Example 2 — PM2.5 / PM10
A production process generates visible dust.
The company improves local extraction.
Before
PM measurements are recorded during production.
Action
Extraction system improved.
After
Measurements are repeated under reasonably comparable operating conditions.
Now the company has data to support further investigation.
Possible instruments:
PM2.5 Monitor
PM10 Monitor
Particulate Monitor
IAQ Monitor
Where formal occupational or environmental assessment is required, appropriate methods and applicable requirements should be followed.
Example 3 — Noise Reduction
A machine is considered excessively noisy.
The company installs an enclosure or other engineering control.
Before
Noise measurement recorded.
Action
Noise-control measure installed.
After
Noise measured again.
Possible instrument:
Sound Level Meter
This creates an objective comparison rather than relying only on:
“It sounds quieter.”
Example 4 — Lighting Upgrade
A company replaces older lighting with more energy-efficient lighting.
There are actually two questions:
Did electricity consumption decrease?
and
Is workplace illumination still suitable?
This means the project may involve two types of measurement:
Energy
Clamp Meter
Power Meter
Energy Monitoring Instrument
Illumination
Lux Meter
This is a good example of why ESG improvement should consider more than one parameter.
Saving electricity while creating unsuitable working conditions is not necessarily a good outcome.
Example 5 — Warehouse Temperature
A warehouse experiences excessive afternoon temperatures.
Before
A data logger records the temperature trend.
Action
Ventilation, insulation or HVAC is improved.
After
The logger records the new trend.
Now management can compare:
Average temperature
Maximum temperature
Duration of high-temperature conditions
Time of peak temperature
Possible instruments:
Temperature Data Logger
Temperature & Humidity Data Logger
This is much more informative than comparing one reading before and one reading after.
Example 6 — Energy Efficiency
A factory suspects that one production machine consumes excessive electricity.
Before
Relevant electrical measurements are recorded.
Action
The machine is serviced or operating conditions are optimized.
After
Measurements are repeated.
Possible instruments:
Clamp Meter
Power Meter
Electrical Data Logger
Now the company can investigate whether electrical behaviour changed.
Example 7 — Preventive Maintenance
A motor shows an unusual thermal pattern.
Before
Thermal image recorded.
Investigation
Maintenance team identifies a possible issue.
Action
Appropriate maintenance performed.
After
Thermal inspection repeated.
Possible instrument:
Thermal Imaging Camera
The before-and-after thermal images can provide useful maintenance documentation.
Example 8 — Vibration
A rotating machine develops increased vibration.
Before
Vibration measurement recorded.
Action
Alignment, bearing or another mechanical issue is investigated and corrected.
After
Vibration measured again.
Possible instrument:
Vibration Meter
Again, measurement helps verify whether the maintenance action changed the machine condition.
Example 9 — Water Treatment
A company adjusts part of its water-treatment process.
Depending on the application, it may monitor parameters such as:
pH
Conductivity
TDS
Turbidity
Dissolved oxygen
The same principle applies:
Before → Change → After
However, companies should use appropriate measurement methods and follow applicable regulatory requirements where formal compliance testing is involved.
Example 10 — Heat Conditions
A company improves ventilation or shading in a hot work area.
Possible measurements may include:
Temperature
Humidity
WBGT where appropriate
The company can compare conditions before and after the intervention.
For formal occupational heat-stress assessment, applicable methods and requirements should be followed.
Don't Compare Measurements Taken Under Completely Different Conditions
Before-and-after measurement sounds simple.
But poor comparison can be misleading.
Imagine:
Before
Warehouse measured at 3:00 PM on a hot production day.
After
Warehouse measured at 8:00 AM on a cool rainy day.
The readings may be different even if the improvement had little effect.
Where possible, comparisons should consider relevant conditions such as:
Time
Location
Production activity
Occupancy
Equipment load
Weather
Measurement duration
Instrument
Measurement method
The objective is to make the comparison meaningful.
Use the Same Measurement Location
Measurement location matters.
Suppose CO₂ is measured:
Before:
In the center of a crowded meeting room.
After:
Beside an open doorway.
The results may not be directly comparable.
Where appropriate, define measurement locations and use them consistently.
Use the Same Instrument Where Practical
Using the same instrument can make comparison easier, provided the instrument remains suitable and properly managed.
At minimum, record:
Instrument ID
Measurement location
Date
Time
Operating conditions
Reading
This makes the comparison more traceable.
Why Data Logging Is Powerful for Before-and-After Studies
One reading before and one reading after can be useful.
But environmental conditions often fluctuate.
Data logging provides a much richer picture.
For example:
Before HVAC Improvement
Maximum temperature: 34°C
High-temperature duration: 4 hours/day
After Improvement
Maximum temperature: 29°C
High-temperature duration: 45 minutes/day
Now management sees not only the temperature difference but also the duration.
This is why loggers can be particularly useful for improvement verification.
Don't Cherry-Pick the Best Number
If a company records hundreds of measurements, selecting only the most favorable result can create a misleading picture.
A better approach is to examine relevant trends and conditions.
Depending on the application, useful information may include:
Minimum
Maximum
Average
Duration
Time of occurrence
Trend
Good ESG measurement should help management understand reality, not simply produce attractive numbers.
Record the Improvement Action
A useful before-and-after record should not contain only measurements.
It should also explain:
What changed?
For example:
Problem: High afternoon warehouse temperature
Baseline: Temperature logged for seven days
Action: Ventilation system improved
Verification: Temperature logged again
Result: Before-and-after trends compared
This creates a simple improvement case study.
Build an ESG Improvement Evidence Folder
Companies can organize improvement projects using folders such as:
01 — Problem / Objective
02 — Baseline Measurements
03 — Improvement Action
04 — After Measurements
05 — Comparison
06 — Supporting Photos
07 — Calibration / Instrument Information where required
Now, when management or a customer asks:
“What environmental improvements have you made?”
the company can show more than a statement.
It can show a documented project.
Measurement Can Turn Small Improvements into Useful ESG Stories
Not every ESG improvement needs to be a million-ringgit project.
A small SME might:
Improve ventilation
Reduce unnecessary equipment operating hours
Improve lighting
Repair an inefficient machine
Improve dust extraction
Improve warehouse conditions
If measurements are collected before and after, even a relatively small project can produce useful evidence of continuous improvement.
This can make ESG more practical for SMEs.
But Measurement Does Not Automatically Prove Causation
A before-and-after difference does not always prove that one action caused the entire change.
Other factors may also influence measurements.
Examples include:
Weather
Production volume
Occupancy
Operating hours
Different raw materials
Seasonal conditions
Companies should interpret results carefully.
The goal is reliable evidence, not exaggerated claims.
Before-and-After Measurement Equipment Malaysia
MTM Precision supplies instruments that can support before-and-after measurement projects, including:
CO₂ Meters
Indoor Air Quality Monitors
PM2.5 / PM10 Monitors
Temperature & Humidity Data Loggers
Sound Level Meters
Lux Meters
Heat Stress / WBGT Meters
Water Quality Meters
Clamp Meters
Power Measurement Instruments
Electrical Data Loggers
Thermal Imaging Cameras
Infrared Thermometers
Vibration Meters
Environmental Data Loggers
Industrial Testing Instruments
The correct instrument depends on the improvement you want to verify.
Before Starting an ESG Improvement Project, Ask One Question
Before changing the system, equipment or workplace, ask:
“Should we measure the current condition first?”
Because once the improvement has already been completed, the original baseline may be gone.
You can measure the new condition.
But you may no longer know exactly what the old condition was.
This is the same problem as historical data:
You cannot go backwards and create a genuine baseline.
Measure Before Spending Money
There is another business advantage.
Measurement can help companies decide whether an improvement is actually necessary.
Instead of immediately spending money on a solution:
Measure first.
Understand the problem.
Then invest.
After implementation:
Measure again.
Verify the result.
This creates a much stronger decision process:
MEASURE → DECIDE → INVEST → VERIFY
ESG Improvement Is Stronger When It Has Numbers
“We improved ventilation.”
Good.
“We reduced energy use.”
Good.
“We improved warehouse conditions.”
Good.
But the next question is:
“By how much?”
That is where measurement becomes valuable.
For Malaysian SMEs, ESG does not always need to begin with complicated reporting.
Sometimes it can begin with something much simpler:
Find a real problem.
Measure it.
Improve it.
Measure it again.
Keep the evidence.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
📱 WhatsApp: +6016-660 7346
Planning an environmental, energy or workplace improvement project?
Before making the change, tell MTM Precision what you want to improve.
We can help identify suitable instruments for baseline and after-improvement measurements.
Don't only make the improvement. Measure the difference.
13 Aug 2026