Indoor Air Quality and ESG in Malaysia: What Should Companies Measure?

Indoor Air Quality and ESG in Malaysia: What Should Companies Measure?

 

Indoor air quality is becoming an increasingly important topic for offices, factories, warehouses, commercial buildings and other workplaces.

 

But when a company says:

 

“We want to improve indoor air quality.”

 

the first question should be:

 

What exactly do we need to measure?

 

Because “air quality” is not one single parameter.

 

Depending on the workplace and objective, companies may need to look at:

 

CO₂

 

PM2.5

 

PM10

 

Temperature

 

Relative Humidity

 

TVOC

 

Formaldehyde / HCHO

 

Other specific parameters

 

For Malaysian companies working on ESG, workplace improvement or facility management, indoor environmental measurement can provide useful data.

 

The key is to measure the right parameter for the right reason.

 

How Does Indoor Air Quality Relate to ESG?

 

Indoor environmental conditions can connect particularly with the Social part of ESG because employees spend many hours inside workplaces.

 

It can also connect with the Environmental side through:

 

Ventilation

 

HVAC efficiency

 

Energy use

 

Building operation

 

And it connects with Governance when companies establish:

 

Monitoring procedures

 

Measurement records

 

Instrument management

 

Corrective actions

 

But an IAQ meter itself does not make a company ESG compliant.

 

It provides data that may support a wider workplace and environmental-management program.

 

1. CO₂ Monitoring

 

CO₂ is one of the most useful parameters for understanding changes in occupied indoor environments.

 

Indoor CO₂ can vary according to factors such as:

 

Number of occupants

 

Ventilation

 

Room size

 

Working hours

 

Meeting-room usage

 

Door and window conditions

 

Imagine a meeting room.

 

At 9:00 AM:

 

Few people are inside.

 

Later:

 

Ten people enter.

 

The door closes.

 

The meeting continues.

 

CO₂ levels may change over time.

 

A measurement instrument allows the facility team to observe that change.

 

CO₂ Meter or CO₂ Data Logger?

 

This depends on the question.

 

CO₂ Meter

 

Useful when asking:

 

“What is the CO₂ level now?”

 

CO₂ Data Logger

 

Useful when asking:

 

“What happens to CO₂ throughout the day?”

 

For offices and occupied spaces, the second question can often reveal much more.

 

A room may look perfectly normal at 8:30 AM.

 

But what happens at:

 

11:00 AM?

 

2:00 PM?

 

4:00 PM?

 

Historical data can reveal patterns that spot measurements miss.

 

2. PM2.5 and PM10

 

Particulate matter is another important air-quality parameter.

 

Possible indoor sources or influences may include:

 

Outdoor pollution

 

Construction

 

Production processes

 

Material handling

 

Vehicle movement

 

Dust

 

Cleaning activities

 

Ventilation conditions

 

Depending on the application, companies may monitor:

 

PM2.5

 

and

 

PM10

 

Possible instruments include:

 

PM2.5 Monitor

 

PM10 Monitor

 

Particulate Monitor

 

Multi-Parameter IAQ Monitor

 

Visual Cleanliness Is Not Measurement

 

An office can look clean.

 

A factory area can look dusty.

 

Both observations are useful.

 

But neither provides a particulate concentration.

 

This is the difference between:

 

OBSERVATION

 

and

 

MEASUREMENT.

 

The instrument provides a number that can be recorded and compared.

 

3. Temperature

 

Temperature is one of the easiest environmental parameters to understand.

 

Employees quickly notice when a room feels:

 

Too hot

 

Too cold

 

Uncomfortable

 

But different areas of the same building may have different temperatures.

 

Possible measurement locations include:

 

Workstations

 

Meeting rooms

 

Warehouses

 

Production areas

 

Server rooms

 

Laboratories

 

A portable thermometer can be useful for spot checks.

 

A data logger can reveal how temperature changes over time.

 

4. Relative Humidity

 

Humidity is often monitored together with temperature.

 

Relative humidity may be relevant to:

 

Indoor environmental conditions

 

Product storage

 

Materials

 

Warehouses

 

Laboratories

 

Condensation concerns

 

Possible instruments include:

 

Temperature & Humidity Meter

 

Thermo-Hygrometer

 

Temperature & Humidity Data Logger

 

Again, the required measurement depends on the application.

 

5. TVOC

 

Some indoor environments may have concerns involving volatile organic compounds.

 

Potential sources can include certain:

 

Paints

 

Solvents

 

Adhesives

 

Cleaning products

 

Furnishings

 

Building materials

 

Industrial processes

 

A TVOC-capable instrument may be useful for certain screening and monitoring applications.

 

However, a portable TVOC reading should not automatically be treated as a complete chemical analysis.

 

Where specific compounds or formal compliance testing are required, appropriate professional or laboratory methods may be necessary.

 

6. Formaldehyde / HCHO

 

Formaldehyde may be relevant in certain indoor environments depending on materials and activities.

 

Possible sources may include certain:

 

Building materials

 

Furniture

 

Adhesives

 

Renovation materials

 

Manufacturing processes

 

Portable HCHO meters can be useful for appropriate screening applications.

 

But companies should understand the instrument's intended use and limitations.

 

A general-purpose handheld meter should not automatically be treated as equivalent to formal laboratory analysis.

 

7. Multi-Parameter IAQ Monitors

 

Some indoor air-quality instruments combine several sensors.

 

Depending on the model, one device may measure parameters such as:

 

CO₂

 

PM2.5

 

PM10

 

Temperature

 

Humidity

 

TVOC

 

HCHO

 

This can be convenient for general indoor environmental monitoring.

 

But more sensors do not automatically mean the instrument is suitable for every application.

 

Always check:

 

Measurement range

 

Accuracy

 

Sensor type

 

Logging capability

 

Calibration requirements

 

Intended use

 

Where Should You Measure Indoor Air Quality?

 

Measurement location matters.

 

Do not simply place the instrument wherever there is an available table.

 

Consider:

 

Where employees work

 

Occupancy

 

Ventilation

 

Air-conditioning outlets

 

Doors

 

Windows

 

Pollution sources

 

Production activities

 

Room layout

 

A measurement beside an open door may differ from one in the center of an occupied room.

 

The location should match the purpose of the measurement.

 

One Reading Is Not the Whole Day

 

This is one of the biggest mistakes in environmental monitoring.

 

Imagine:

 

9:00 AM:

 

CO₂ = Reading A

 

Management concludes:

 

“Everything is okay.”

 

But the office becomes crowded after lunch.

 

By 3:00 PM, conditions may be different.

 

This is why data logging can be valuable.

 

Environmental conditions change.

 

A data logger captures the trend.

 

Establish a Baseline Before Making Improvements

 

Suppose employees complain about a meeting room.

 

Management plans to improve ventilation.

 

Before making the change:

 

Measure first.

 

Collect baseline data.

 

Then improve the ventilation.

 

Measure again.

 

Now the company has:

 

BEFORE

 

and

 

AFTER

 

data.

 

This creates a much stronger improvement record.

 

Example — Ventilation Improvement

 

Step 1

 

Monitor CO₂ during normal room use.

 

Step 2

 

Identify the periods when readings increase.

 

Step 3

 

Review ventilation and occupancy conditions.

 

Step 4

 

Implement an appropriate improvement.

 

Step 5

 

Repeat monitoring under reasonably comparable conditions.

 

Step 6

 

Compare the results.

 

This creates:

 

MEASURE → IMPROVE → VERIFY

 

IAQ and Energy Efficiency Can Conflict

 

There is an interesting ESG challenge here.

 

Companies want to save electricity.

 

Air-conditioning and ventilation consume energy.

 

Management may be tempted to reduce ventilation or HVAC operation.

 

But workplace environmental conditions also matter.

 

So the objective should not simply be:

 

Use less electricity.

 

A better objective is:

 

Operate the building efficiently while maintaining appropriate workplace conditions.

 

This is where multiple measurements can work together.

 

For example:

 

Energy Measurement

 

CO₂

 

Temperature

 

Humidity

 

Now facility management has a more complete picture.

 

Example — Office HVAC Investigation

 

A company thinks its air-conditioning system is using too much electricity.

 

Instead of simply increasing the thermostat setting, the facility team investigates:

 

Electrical

 

How is energy consumption changing?

 

Temperature

 

Are rooms being overcooled?

 

Humidity

 

Are indoor conditions changing?

 

CO₂

 

What happens during occupancy?

 

The objective becomes optimization rather than blind energy reduction.

 

Indoor Air Quality in Factories

 

IAQ is not only an office issue.

 

Factories may contain:

 

Production areas

 

QC laboratories

 

Offices

 

Warehouses

 

Meeting rooms

 

Canteens

 

Maintenance areas

 

Different areas may require different measurements.

 

For example:

 

Production may have particulate concerns.

 

Office areas may benefit from CO₂ monitoring.

 

Warehouses may prioritize temperature and humidity.

 

There is no single measurement point that represents an entire factory.

 

Indoor Air Quality in Warehouses

 

Warehouses can have different environmental conditions depending on:

 

Ventilation

 

Door opening

 

Vehicle movement

 

Stored materials

 

Outdoor air

 

Occupancy

 

Temperature

 

Depending on the application, monitoring may include:

 

Temperature

 

Humidity

 

PM2.5 / PM10

 

CO₂

 

For storage applications, data logging may be particularly valuable.

 

Indoor Air Quality After Renovation

 

Companies sometimes want to investigate indoor conditions after:

 

Painting

 

Renovation

 

New furniture installation

 

Flooring work

 

Fit-out projects

 

Depending on the concern, screening measurements may include:

 

TVOC

 

HCHO

 

PM2.5

 

PM10

 

CO₂

 

Temperature

 

Humidity

 

Again, portable screening instruments should not automatically be treated as formal laboratory testing.

 

Use the appropriate measurement method for the objective.

 

Don't Buy an IAQ Monitor Just Because It Displays Seven Parameters

 

This is worth emphasizing.

 

A product advertisement may say:

 

7-in-1

 

or

 

10-in-1

 

That sounds attractive.

 

But ask:

 

Which parameters do we actually need?

 

What sensor technology is used?

 

What is the measurement range?

 

What is the accuracy?

 

Does it log data?

 

Can data be exported?

 

Is calibration relevant to our application?

 

A five-parameter instrument that meets the requirement can be more useful than a ten-parameter instrument that does not.

 

Portable Meter or Fixed Monitor?

 

Portable Meter

 

Useful for:

 

Comparing rooms

 

Troubleshooting

 

Spot checks

 

Moving between departments

 

Initial investigations

 

Fixed / Continuous Monitor

 

Useful when:

 

Long-term monitoring is required

 

Trends matter

 

Remote access is useful

 

Alerts are required

 

A specific location needs continuous monitoring

 

Many SMEs can begin with portable measurement before deciding whether permanent monitoring is necessary.

 

Keep IAQ Records

 

A basic record may include:

 

Date

 

Time

 

Location

 

Occupancy

 

Parameter

 

Reading

 

Instrument ID

 

Relevant activity

 

Remarks

 

Corrective action

 

For data loggers, records may be generated automatically.

 

But somebody still needs to review the information.

 

What Should Happen When a Reading Looks Abnormal?

 

Do not jump immediately to a conclusion.

 

Instead:

 

DETECT

 

↓

 

VERIFY

 

↓

 

INVESTIGATE

 

↓

 

IDENTIFY POSSIBLE CAUSE

 

↓

 

TAKE APPROPRIATE ACTION

 

↓

 

MEASURE AGAIN

 

This is much better than treating one unusual reading as proof of a specific problem.

 

IAQ Measurement Does Not Replace Professional Assessment

 

Portable instruments can be very useful for internal monitoring, screening and troubleshooting.

 

However, formal workplace, regulatory or occupational assessments may require:

 

Specific methods

 

Specific instruments

 

Competent persons

 

Laboratory analysis

 

Applicable Malaysian requirements

 

Companies should determine the purpose of the measurement before deciding whether internal monitoring is sufficient.

 

Indoor Air Quality Monitoring Equipment Malaysia

 

MTM Precision supplies indoor environmental monitoring instruments for Malaysian offices, factories, warehouses and commercial facilities, including:

 

Indoor Air Quality Monitors

 

CO₂ Meters

 

CO₂ Data Loggers

 

PM2.5 Monitors

 

PM10 Monitors

 

HCHO / Formaldehyde Meters

 

TVOC Meters

 

Temperature & Humidity Meters

 

Temperature & Humidity Data Loggers

 

Environmental Data Loggers

 

Lux Meters

 

Industrial Environmental Measuring Instruments

 

When selecting an IAQ instrument, tell us:

 

Where will you use it?

 

Which parameters do you need?

 

Is it for spot checking or continuous monitoring?

 

Do you need data logging?

 

Do you need USB, Bluetooth or Wi-Fi?

 

Is there a customer or technical specification?

 

This helps narrow down suitable options.

 

Don't Start by Asking “Is the Air Good?”

 

Start with a more useful question:

 

“What do we need to measure?”

 

CO₂?

 

PM2.5?

 

PM10?

 

Temperature?

 

Humidity?

 

TVOC?

 

HCHO?

 

Then measure.

 

Record the result.

 

Understand the pattern.

 

Make an improvement where appropriate.

 

And measure again.

 

That is how indoor air quality becomes something a company can manage rather than simply describe.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 www.mtmpre.com.my

📧 mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346

 

Not sure which indoor air-quality parameter your workplace should monitor?

 

Tell MTM Precision the location, application and problem you are trying to investigate.

 

We can help identify suitable CO₂, PM, temperature, humidity, HCHO, TVOC or multi-parameter IAQ monitoring instruments for the application.

 

Better indoor air management starts by measuring what is actually happening.


 

13 Aug 2026