Linshang LS251D vs Conventional Bench Hardness Tester Malaysia
Linshang LS251D vs Conventional Bench Hardness Tester Malaysia
Which Hardness Testing Solution Is Better for Your Application?
When selecting hardness testing equipment, many Malaysian industrial users face a practical question:
Should we buy a portable Leeb hardness tester or use a conventional bench hardness tester?
The answer depends mainly on the workpiece, testing location, required test method and inspection purpose.
The Linshang LS251D Leeb Hardness Tester is designed primarily for portable testing of suitable large and heavy metal components, while conventional bench hardness testers are generally more appropriate for controlled testing of samples that can be brought to the machine.
What Is Linshang LS251D?
The Linshang LS251D is a portable Leeb hardness tester using a digital D-type impact device.
It measures hardness using the Leeb rebound principle and supports hardness scales including:
HL
HRC
HRB
HRA
HB
HV
HS
Its key advantage is portability.
Technicians can bring the instrument directly to large machinery components rather than moving the component to a laboratory.
What Is a Bench Hardness Tester?
A conventional bench hardness tester is normally installed at a fixed location such as:
QC laboratory
Production inspection room
Heat-treatment facility
Material laboratory
Manufacturing plant
Depending on the machine, it may perform Rockwell, Brinell, Vickers or another hardness testing method.
The workpiece or sample normally needs to be positioned correctly on the testing machine.
Difference 1: Portability
Linshang LS251D
Portable and designed for field or workshop use.
Suitable when the component is:
Large
Heavy
Installed
Difficult to transport
Bench Hardness Tester
Normally remains at a fixed testing location.
The sample needs to come to the tester.
Advantage for field work: LS251D
Difference 2: Workpiece Size
Imagine a large machinery shaft weighing 100 kg.
Moving this component simply for hardness testing may require lifting equipment and additional handling.
A portable Leeb tester can be brought directly to the shaft.
However, if the sample is a small metal coupon that can easily be placed on a laboratory tester, a bench hardness tester may be more appropriate.
Difference 3: Testing Principle
The LS251D uses the Leeb rebound method.
Conventional bench testers may use direct indentation methods such as:
Rockwell
Brinell
Vickers
These are different physical test methods.
This distinction becomes important when an engineering specification requires a particular standardized hardness test.
Difference 4: HRC Measurement
The LS251D can display HRC values.
However, it does this by converting the Leeb measurement according to the applicable material and conversion relationship.
A conventional Rockwell tester performs an actual Rockwell indentation test.
Therefore:
LS251D HRC = Converted value from Leeb measurement
Rockwell tester HRC = Direct Rockwell test
If a specification specifically requires direct Rockwell testing, this requirement should be followed.
Difference 5: Speed for Large Component Inspection
For large machinery and heavy components, portable testing can significantly simplify the inspection process.
The technician can:
Prepare the surface.
Select the material.
Position the impact device.
Take multiple measurements.
Review the hardness result.
There is no need to transport the entire component to a laboratory.
Difference 6: Small and Thin Components
This is where a bench hardness tester may have an advantage.
Leeb hardness testing depends on sufficient workpiece mass, thickness and rigidity.
Very small or thin components may:
Vibrate
Move
Flex during impact
Some lightweight components can be properly coupled to a heavy support, but other testing methods may be more suitable.
Difference 7: Field Maintenance
For maintenance teams, portability can be extremely valuable.
The LS251D can be used for suitable components during:
Machinery overhaul
Factory shutdown
Replacement part inspection
Heavy equipment maintenance
On-site troubleshooting
Field inspection
A conventional bench tester is less convenient when the component cannot easily be removed.
Quick Comparison
FeatureLinshang LS251DConventional Bench TesterPortabilityHighLowLarge heavy componentsVery suitable when Leeb conditions are metOften difficultInstalled machineryPracticalUsually impracticalSmall samplesDepends on workpieceOften suitableField maintenanceVery suitableLimitedTesting methodLeeb reboundDepends on machineHRCConverted where applicableDirect with Rockwell testerLaboratory QCPossible for suitable workpiecesStrong applicationMultiple locationsConvenientLess convenient
Which One Should a Factory Buy?
Consider the type of components your company normally tests.
Choose a Portable Leeb Tester When:
Most components are large and heavy.
Testing must be performed on-site.
Machinery cannot easily be dismantled.
Maintenance teams need portability.
Fast comparative hardness inspection is important.
Consider a Bench Tester When:
Most samples are small and easy to handle.
Testing is performed in a QC laboratory.
A specific direct indentation method is required.
The applicable standard requires direct Rockwell, Brinell or Vickers testing.
Do Some Companies Need Both?
Yes.
A factory may use a bench hardness tester for controlled production QC while keeping a portable Leeb hardness tester for large machinery, field inspection and maintenance.
The two instruments can complement each other rather than compete directly.
Buying Hardness Testing Equipment in Malaysia
Before selecting a hardness tester, prepare the following information:
Material
Workpiece size
Approximate weight
Thickness
Required hardness scale
Testing location
Applicable standard
Whether the component can be moved
This information makes it much easier to determine whether the Linshang LS251D or another hardness testing solution is more appropriate.
Linshang LS251D for Portable Industrial Hardness Testing
For Malaysian factories, engineering workshops and maintenance teams working with large metal components, the Linshang LS251D Leeb Hardness Tester offers a major practical advantage: portability.
Instead of asking only:
“Which hardness tester is more accurate?”
also ask:
“Which testing method is correct for my workpiece and application?”
Choosing the correct method is the foundation of reliable hardness testing.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026