Myzox CL-28 Auto Level for Building Foundation and Site Leveling Malaysia

Myzox CL-28 Auto Level for Building Foundation and Site Leveling Malaysia

 

Accurate elevation control is essential during building construction. From excavation and foundation work to floor levels and drainage, contractors need a reliable method to establish and transfer reference elevations across the job site.

 

The Myzox CL-28 Auto Level is designed for general construction surveying and leveling applications. With 28X magnification, 36 mm objective aperture, 0.4 m minimum focusing distance and 卤2.0 mm accuracy for 1 km double-run leveling, it is a practical optical leveling instrument for everyday site work.

 

MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia, supplying professional surveying instruments and accessories to contractors, engineers and surveyors.

 

Why Is Leveling Important During Foundation Work?

 

Before a building rises above ground, contractors must establish accurate reference elevations.

 

These levels can be used to control:

 

Excavation depth

 

Foundation elevation

 

Footing levels

 

Concrete levels

 

Ground levels

 

Drainage levels

 

Finished floor levels

 

Site formation levels

 

An error made during the early stages of construction can affect subsequent work. Establishing reliable benchmarks and regularly checking elevations therefore forms an important part of construction quality control.

 

How Is the Myzox CL-28 Used on a Construction Site?

 

A typical leveling operation involves setting up the CL-28 on a suitable tripod and observing a leveling staff positioned at different points.

 

By comparing staff readings against a known benchmark, the operator can determine differences in elevation.

 

This technique can be applied when:

 

Transferring a benchmark

 

Checking excavation levels

 

Setting foundation elevations

 

Checking concrete work

 

Monitoring earthworks

 

Establishing drainage gradients

 

Checking finished levels

 

The automatic leveling mechanism helps establish the instrument's line of sight after the unit has been properly set up within its operating range.

 

28X Magnification for Everyday Site Work

 

The Myzox CL-28 provides 28X magnification.

 

This makes it suitable for general construction applications where operators need to observe graduations on a leveling staff at normal working distances.

 

The CL-28 can therefore be considered for building contractors, civil contractors, site supervisors and engineering teams that regularly perform elevation checks.

 

0.4 m Minimum Focusing Distance

 

Construction sites do not always provide large open spaces.

 

Sometimes the operator needs to take observations at relatively short distances.

 

The CL-28 has a minimum focusing distance of approximately 0.4 metre, giving users greater flexibility when working in confined areas or when the leveling staff needs to be positioned relatively close to the instrument.

 

卤2.0 mm Leveling Accuracy

 

According to the Myzox specification, the CL-28 provides 卤2.0 mm accuracy for 1 km double-run leveling.

 

This specification makes it suitable for many general construction and civil engineering leveling applications.

 

However, instrument accuracy is only one part of obtaining reliable results.

 

Good field practice is also important, including:

 

Correct tripod setup

 

Stable instrument positioning

 

Proper staff positioning

 

Balanced observation distances where appropriate

 

Clear focusing

 

Correct reading and recording

 

Regular instrument inspection and calibration

 

Using the CL-28 for Excavation and Earthworks

 

During site preparation, contractors often need to determine whether soil should be excavated or filled to achieve the required design elevation.

 

An auto level can assist with checking:

 

Existing Ground Level

Measure elevations before excavation or filling begins.

 

Excavation Depth

Check whether excavation has reached the required level.

 

Formation Level

Verify the prepared ground before subsequent construction begins.

 

Fill Level

Monitor filling and compaction work against the required elevation.

 

This makes an optical auto level a useful tool throughout different stages of earthwork operations.

 

Using the CL-28 for Foundation Construction

 

Foundation work requires consistent elevation control.

 

The Myzox CL-28 can be used to transfer established site benchmarks to foundation work areas and assist teams in checking elevation differences.

 

Possible applications include:

 

Pad footing work

 

Strip foundations

 

Pile cap construction

 

Ground beams

 

Concrete slabs

 

Foundation excavation

 

The exact surveying procedure and required tolerances should always follow the project's engineering specifications.

 

Using an Auto Level for Finished Floor Level

 

Finished Floor Level, commonly referred to as FFL, is another important reference in building construction.

 

Once a benchmark is established, an automatic level can help transfer elevation references to different areas of the building.

 

This can assist contractors when checking:

 

Ground-floor levels

 

Concrete slab elevations

 

External platform levels

 

Drainage interfaces

 

Surrounding ground levels

 

Myzox CL-28 or CL-36 for Construction?

 

Myzox offers both the CL-28 and CL-36 in this automatic level series.

 

The CL-28 features:

 

28X magnification

 

卤2.0 mm 1 km double-run leveling accuracy

 

The CL-36 features:

 

36X magnification

 

卤1.0 mm 1 km double-run leveling accuracy

 

For routine construction and building leveling, the CL-28 is a practical general-purpose option.

 

For users who require higher magnification or greater specified leveling accuracy, the CL-36 may be more suitable.

 

Frequently Asked Questions

 

Can the Myzox CL-28 be used for foundation work?

 

Yes. The CL-28 can be used for transferring and checking elevations during foundation and general building construction work.

 

Can it be used for excavation?

 

Yes. An automatic level can help contractors check existing ground, excavation and formation elevations.

 

What magnification does the CL-28 provide?

 

The Myzox CL-28 provides 28X magnification.

 

What is the accuracy of the CL-28?

 

Its specified accuracy is 卤2.0 mm for 1 km double-run leveling.

 

Can the CL-28 be used indoors?

 

Its 0.4 m minimum focusing distance can be useful where observation distances are relatively short, provided the site conditions allow proper setup and sighting.

 

Do automatic levels require calibration?

 

Surveying instruments should be periodically checked to ensure that they remain within the required accuracy for the work being performed. Calibration and instrument verification are particularly important when equipment is used regularly on construction sites.

 

Myzox CL-28 Auto Level Supplier Malaysia

 

MTM Precision supplies Myzox CL-28, CL-36 and professional surveying accessories in Malaysia.

 

As an authorized distributor of Myzox in Malaysia, we support customers looking for suitable equipment for construction surveying, civil engineering and site leveling applications.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact MTM Precision for enquiries about the Myzox CL-28 Auto Level, CL-36 Auto Level and surveying equipment in Malaysia.


 

16 Aug 2026