Myzox CL-28 CL-36 Auto Level for Benchmark Transfer and Elevation Measurement Malaysia

Myzox CL-28 CL-36 Auto Level for Benchmark Transfer and Elevation Measurement Malaysia

 

Benchmark transfer and elevation measurement are fundamental tasks in construction surveying and civil engineering. A reliable reference level allows contractors and engineers to maintain consistent elevations across different parts of a project.

 

The Myzox CL-28 and CL-36 Auto Levels are professional optical leveling instruments suitable for benchmark transfer, elevation checking and general construction surveying applications in Malaysia.

 

The CL-28 provides 28X magnification with ±2.0 mm accuracy for 1 km double-run leveling, while the CL-36 offers higher 36X magnification with ±1.0 mm accuracy.

 

MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia, supplying Myzox surveying instruments and accessories for professional users.

 

What Is a Benchmark in Construction Surveying?

 

A benchmark is a fixed reference point with a known or established elevation.

 

Construction teams can use this reference to determine the elevations of other points throughout the project site.

 

Benchmarks are important for work involving:

 

Building foundations

 

Finished floor levels

 

Road formation

 

Drainage

 

Earthworks

 

Infrastructure

 

Concrete structures

 

Site development

 

Without a consistent elevation reference, different sections of a project could potentially be constructed at incorrect levels.

 

What Is Benchmark Transfer?

 

Benchmark transfer is the process of extending or transferring a known elevation from one location to another.

 

For example, an established benchmark may be located near the entrance of a construction site.

 

As construction progresses, contractors may need additional temporary benchmarks closer to:

 

A building foundation

 

A road section

 

A drainage area

 

An excavation zone

 

Another part of a large development

 

An automatic level and leveling staff can be used to transfer the elevation from the original reference to the new location.

 

How Does an Auto Level Measure Elevation Differences?

 

The basic process involves observing staff readings from a stable instrument position.

 

A simplified leveling sequence may include:

 

Set up the Myzox Auto Level on a stable tripod.

 

Properly level the instrument.

 

Place a leveling staff on the known benchmark.

 

Take and record a backsight reading.

 

Calculate the height of instrument.

 

Move the staff to the required point.

 

Take the next reading.

 

Calculate the elevation of the new point.

 

For important engineering work, the actual field procedure should follow the project's specified surveying methodology.

 

Why Use Myzox CL-28 for Benchmark Transfer?

 

The Myzox CL-28 provides a practical specification for routine construction leveling.

 

Key specifications include:

 

28X magnification

 

36 mm objective aperture

 

0.4 m minimum focusing distance

 

±2.0 mm accuracy for 1 km double-run leveling

 

±15′ self-leveling range

 

360° horizontal circle

 

Approx. 1.3 kg weight

 

The CL-28 is particularly suitable for general building and civil construction where observation distances and accuracy requirements are within its specifications.

 

Why Use Myzox CL-36 for Benchmark Transfer?

 

The Myzox CL-36 offers a higher specification for users requiring greater magnification and leveling accuracy.

 

Key specifications include:

 

36X magnification

 

36 mm objective aperture

 

0.4 m minimum focusing distance

 

±1.0 mm accuracy for 1 km double-run leveling

 

±15′ self-leveling range

 

360° horizontal circle

 

Approx. 1.3 kg weight

 

The CL-36 can be particularly useful for larger sites and engineering projects where higher magnification is beneficial.

 

Applications for Elevation Measurement

 

The Myzox CL series can support elevation measurements across many types of projects.

 

Foundation Work

 

Check excavation, footing and foundation elevations against established reference levels.

 

Finished Floor Level

 

Transfer and verify elevation references during building construction.

 

Road Construction

 

Check formation, earthwork and related road elevations.

 

Drainage

 

Establish and verify elevations for drains, culverts and other gravity-flow infrastructure.

 

Earthworks

 

Monitor excavation and filling against project reference levels.

 

Infrastructure

 

Transfer benchmarks across larger project sites to maintain consistent elevation control.

 

Why Accurate Benchmark Transfer Matters

 

Small elevation errors can become significant when a reference is repeatedly transferred across a project.

 

Good surveying practice is therefore important.

 

Operators should consider:

 

Stable tripod setup

 

Correct instrument leveling

 

Vertical staff positioning

 

Clear telescope focusing

 

Appropriate observation distances

 

Accurate reading and recording

 

Suitable checking procedures

 

Regular instrument inspection

 

Critical benchmarks may also require independent verification according to the project's surveying requirements.

 

CL-28 or CL-36 for Elevation Measurement?

 

For general construction and routine benchmark transfer, the CL-28 provides a practical 28X solution.

 

For users who need:

 

Higher magnification

 

Greater staff visibility at longer distances

 

Higher specified leveling accuracy

 

the CL-36 may be more suitable.

 

The correct choice depends on the required tolerance and working conditions rather than magnification alone.

 

Frequently Asked Questions

 

Can the Myzox CL-28 transfer benchmarks?

 

Yes. The CL-28 can be used for general benchmark transfer and construction elevation measurement.

 

Is the CL-36 better for precision leveling?

 

The CL-36 has the higher specified leveling accuracy at ±1.0 mm for 1 km double-run leveling, compared with ±2.0 mm for the CL-28.

 

Can an auto level measure height directly?

 

An optical auto level provides staff readings that are used to determine elevation differences. The operator calculates or records the resulting elevations using an appropriate leveling method.

 

Can these models be used for Finished Floor Level?

 

Yes. Automatic levels can assist in transferring and checking elevation references associated with Finished Floor Level work.

 

Can they be used for road benchmarks?

 

Yes. The CL series can support benchmark transfer and elevation checks for road and infrastructure construction.

 

Which model should I choose?

 

Choose the CL-28 for general construction leveling or consider the CL-36 when higher magnification and greater specified accuracy are required.

 

Myzox Auto Level Supplier in Malaysia

 

MTM Precision supplies Myzox CL-28, CL-36 and professional surveying accessories in Malaysia.

 

As an authorized distributor of Myzox in Malaysia, we support contractors, engineers and surveyors looking for professional equipment for benchmark transfer, elevation measurement and construction surveying.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact MTM Precision for enquiries about the Myzox CL-28, CL-36 Auto Level and surveying equipment in Malaysia.


 

16 Aug 2026