Myzox Monitoring Prism for Deep Excavation Monitoring Malaysia

Myzox Monitoring Prism for Deep Excavation Monitoring

 

Deep excavation projects can require systematic monitoring of surrounding structures and excavation support systems throughout different stages of construction.

 

The Myzox TK-10S / TK-10 Monitoring Prism L-Bar Type provides a compact fixed target for repeated total station observations, making it suitable for deep excavation, structural movement and deformation monitoring applications in Malaysia.

 

Once securely installed at selected monitoring locations, the prism can be measured repeatedly without requiring a surveyor to reposition a conventional prism pole at the same point for every observation.

 

MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia.

 

Why Is Monitoring Important During Deep Excavation?

 

Deep excavation can take place close to existing buildings, roads, retaining structures and other infrastructure.

 

Depending on project requirements, survey monitoring may be used to observe selected points before, during and after excavation activities.

 

Typical applications include:

 

Basement excavation

 

Underground construction

 

MRT and railway projects

 

Commercial development

 

High-rise construction

 

Infrastructure projects

 

Construction beside existing buildings

 

Retaining structure monitoring

 

Excavation near roads

 

Urban redevelopment

 

Monitoring provides positional data that can support the project's engineering assessment.

 

How Does Prism-Based Excavation Monitoring Work?

 

Monitoring prisms are installed at predetermined locations around the excavation and surrounding structures.

 

A total station observes these prisms from established survey control points.

 

The first observation establishes a baseline.

 

Future measurements are compared against this baseline and previous observations.

 

A typical workflow is:

 

Install Monitoring Prisms → Establish Survey Control → Baseline Measurement → Begin Excavation → Repeat Measurements → Compare Coordinates → Report Movement

 

This creates a measurement history throughout the excavation process.

 

Where Can Monitoring Prisms Be Installed?

 

Depending on the monitoring design, prisms may be installed on selected locations such as:

 

Existing building façades

 

Structural columns

 

Retaining walls

 

Excavation support structures

 

Perimeter walls

 

Adjacent infrastructure

 

Bridge structures

 

Other designated monitoring points

 

The actual location of each prism should be determined according to project geometry, visibility and engineering requirements.

 

Monitoring Existing Buildings Beside Excavation

 

One important application is monitoring buildings located close to a deep excavation.

 

Before excavation begins, monitoring prisms can be installed at selected points on the existing structure.

 

Baseline coordinates are recorded.

 

During excavation, the same targets are observed repeatedly.

 

For example:

 

Baseline → Initial Excavation → Intermediate Excavation → Final Excavation Level → Basement Construction → Completion

 

This allows the project team to compare positional measurements throughout different construction stages.

 

Retaining Wall Monitoring During Excavation

 

Retaining systems can also form part of the monitoring program.

 

Multiple Myzox prisms may be positioned along selected sections of a retaining structure.

 

Instead of observing only one point, a network of targets can provide measurement data from several locations.

 

For example:

 

TK-10 Prism 01 → TK-10 Prism 02 → TK-10 Prism 03 → TK-10 Prism 04 → TK-10 Prism 05

 

This can help identify differences in measured movement between monitoring locations.

 

Myzox TK-10S / TK-10 Specifications

 

SpecificationDetailsModelTK-10S / TK-10TypeMonitoring Prism L-Bar TypePrism Size1 inch / 25 mmPrism Constant-25 mmPrism Height60 mmBeam Deviation5″DimensionsH90 × W86.5 × D30 mmWeightApprox. 207 gAdjustmentX/Y direction

 

Its compact L-bar configuration is designed specifically for fixed monitoring applications.

 

Why Use a Fixed Prism Instead of a Prism Pole?

 

A prism pole is ideal when the surveyor needs to move between different points.

 

Deep excavation monitoring normally requires something different: the ability to measure exactly the same monitoring location repeatedly.

 

A fixed monitoring prism offers several practical advantages:

 

Defined permanent or semi-permanent target

 

No repeated prism-pole setup at the target

 

Suitable for difficult-to-access monitoring locations

 

Consistent target identification

 

Practical for multiple monitoring points

 

Suitable for repeated total station observations

 

This is why dedicated monitoring prisms are widely applicable to deformation monitoring projects.

 

Horizontal Movement Monitoring

 

Total station observations can be used to determine changes in horizontal coordinates.

 

If a monitored prism's measured position changes between observation periods, the survey data can be evaluated to determine the magnitude and direction of the positional change.

 

This is particularly relevant when monitoring structures around excavation works.

 

Vertical Movement Monitoring

 

Depending on the monitoring methodology, total station observations may also provide elevation information.

 

Repeated measurements can therefore contribute to monitoring changes in the vertical position of selected points.

 

For projects requiring dedicated settlement measurements, the responsible professionals should select the appropriate monitoring methodology and instrumentation.

 

3D Deformation Monitoring

 

Modern total stations can measure horizontal angle, vertical angle and distance to a prism.

 

These observations can be processed into three-dimensional coordinates.

 

Therefore, fixed monitoring prisms can support evaluation of changes in:

 

X coordinate

 

Y coordinate

 

Z coordinate

 

Horizontal position

 

Vertical position

 

Three-dimensional displacement

 

The actual monitoring accuracy depends on the total station, survey geometry, control network, observation procedure and environmental conditions.

 

Why X/Y Direction Adjustment Is Useful

 

Monitoring points around an excavation are not always positioned directly facing the total station.

 

The X/Y directional adjustment of the Myzox L-bar monitoring prism provides flexibility when orienting the target during installation.

 

Correct prism orientation is important for maintaining a suitable line of sight between the prism and total station.

 

Importance of Stable Reference Points

 

A monitoring prism can only provide useful comparative information when the overall survey control network is properly established.

 

Stable reference points should be located where they are not expected to be affected by the movement being monitored.

 

A typical monitoring arrangement may therefore include:

 

Stable reference points

 

Total station observation position

 

Myzox monitoring prisms

 

Baseline coordinates

 

Repeat observations

 

Data processing

 

Monitoring reports

 

Monitoring procedures should remain as consistent as practical between observation sessions.

 

How Often Should Excavation Monitoring Be Performed?

 

There is no single monitoring interval suitable for every project.

 

Observation frequency may depend on:

 

Excavation depth

 

Construction stage

 

Engineering requirements

 

Site conditions

 

Monitoring specifications

 

Previous measurement results

 

Project risk assessment

 

Some projects may require measurements at specific construction stages, while others may require more frequent observations.

 

The monitoring schedule should follow the requirements established by the responsible project professionals.

 

Outdoor Monitoring for Malaysian Construction Sites

 

Deep excavation monitoring targets can remain outdoors for weeks or months.

 

The Myzox monitoring prism includes an anti-drop structure and waterproof sealing design, supporting monitoring-focused installations.

 

Prisms should nevertheless be inspected periodically to confirm that:

 

Mounting remains secure

 

Prism orientation has not changed

 

Line of sight remains clear

 

The target has not been physically disturbed

 

A disturbed prism can affect the validity of comparisons with earlier observations.

 

Total Station Calibration for Monitoring Work

 

Monitoring projects rely on repeated measurements where consistency is important.

 

Survey companies should maintain their total stations appropriately and follow suitable instrument checking and calibration procedures.

 

MTM Precision provides total station calibration and surveying instrument service in Malaysia, supporting contractors and surveyors carrying out precision measurement work.

 

Complete Monitoring Equipment Solution

 

For excavation and deformation monitoring projects, equipment requirements may include:

 

Total station

 

Monitoring prisms

 

Survey control accessories

 

Tripods

 

Tribrachs

 

Prism accessories

 

Measurement and recording equipment

 

MTM Precision supplies professional surveying equipment and accessories for Malaysian construction and civil engineering applications.

 

Looking for Deep Excavation Monitoring Prism in Malaysia?

 

The Myzox TK-10S / TK-10 Monitoring Prism L-Bar Type is a practical solution for establishing fixed observation points around excavation, retaining structures and nearby buildings.

 

It is suitable for surveyors, contractors, consultants and engineering teams carrying out repeated total station monitoring.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Myzox Authorized Distributor in Malaysia

 

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact MTM Precision for Myzox TK-10S / TK-10 Monitoring Prism price, availability and technical enquiries in Malaysia.


 

18 Aug 2026