Where to Buy Myzox Monitoring Prism TK-10S TK-10 in Malaysia
Where to Buy Myzox Monitoring Prism TK-10S / TK-10 in Malaysia
If you are looking for a Myzox TK-10S / TK-10 Monitoring Prism supplier in Malaysia, MTM Precision Sdn. Bhd. supplies Myzox professional surveying accessories for structural monitoring, construction surveying and engineering applications.
The Myzox TK-10S / TK-10 Monitoring Prism L-Bar Type is designed to provide a compact fixed prism target for repeated total station observations.
It can support monitoring projects involving:
Buildings
Deep excavation
Retaining walls
Bridges
Slopes
Tunnels
High-rise construction
MRT and railway infrastructure
Highways
Structural deformation
MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia.
Buy Myzox TK-10S / TK-10 Monitoring Prism Malaysia
For customers who already know the required model, send MTM Precision:
Model: TK-10S / TK-10
Quantity: Required quantity
Application: Monitoring application
Delivery Location: Malaysia
For example:
Myzox TK-10S Monitoring Prism – 20 pcs
Application: Retaining wall monitoring
Project Location: Selangor
MTM Precision can provide a quotation based on the required model, quantity and current availability.
Myzox TK-10S / TK-10 Specifications
SpecificationDetailsModelsTK-10S / TK-10Product TypeMonitoring Prism L-Bar TypePrism Diameter1 inch / 25 mmPrism Constant-25 mmPrism Height60 mmBeam Deviation5″DimensionsH90 × W86.5 × D30 mmWeightApprox. 207 gAdjustmentX/Y direction
The compact configuration is intended for fixed monitoring points rather than conventional portable prism-pole surveying.
What Is Myzox Monitoring Prism Used For?
The TK-10S / TK-10 provides a fixed optical target for total station measurements.
A typical monitoring process is:
Install Prism → Establish Baseline → Repeat Total Station Measurements → Compare Coordinates → Monitor Positional Changes
The prism itself does not electronically measure movement.
It serves as the physical target observed by the total station.
Myzox Monitoring Prism for Building Monitoring Malaysia
Fixed prisms can be installed at predetermined points on buildings requiring repeated observations.
Potential monitoring applications include buildings located close to:
Deep excavation
Piling works
Basement construction
Tunnelling
MRT construction
Major infrastructure projects
Baseline measurements can be taken before major works begin and compared with subsequent observations.
Myzox Monitoring Prism for Retaining Wall Malaysia
Retaining walls may require multiple fixed monitoring targets.
For example:
RW01 — RW02 — RW03 — RW04 — RW05
A total station can repeatedly observe these points during excavation and construction.
The compact L-bar configuration makes the TK-10S / TK-10 useful where conventional prism poles cannot remain permanently positioned.
Myzox Monitoring Prism for Deep Excavation Malaysia
Deep excavation monitoring can involve:
Existing buildings
Retaining walls
Excavation support structures
Adjacent infrastructure
Monitoring targets may remain installed throughout stages such as:
Baseline → Excavation Stage 1 → Stage 2 → Stage 3 → Basement Construction
This provides a consistent network of observation points.
Myzox Monitoring Prism for Bridge Monitoring Malaysia
Fixed prism targets may be installed at selected bridge locations according to the monitoring design.
Potential locations can include:
Piers
Abutments
Selected structural elements
Adjacent retaining structures
The same targets can then be measured during scheduled monitoring campaigns.
Myzox Monitoring Prism for Slope Monitoring Malaysia
The TK-10S / TK-10 can support suitable surface movement monitoring applications on slopes.
Outdoor monitoring requires consideration of:
Target mounting
Line of sight
Vegetation
Weather exposure
Observation distance
Target protection
Periodic target inspection remains important.
Myzox Monitoring Prism for Tunnel and MRT Projects
Tunnel and MRT projects can require monitoring of surrounding structures.
Fixed prism targets may be used on selected:
Buildings
Retaining structures
Station structures
Bridge or viaduct elements
Infrastructure structures
The monitoring design should follow the project's engineering and surveying requirements.
TK-10S or TK-10: Which Should I Buy?
Both are designed for fixed monitoring applications.
Choose TK-10S When
High target visibility is useful for easier identification on busy construction sites.
Choose TK-10 When
The standard configuration is suitable for the monitoring location.
If you are unsure, provide MTM Precision with your application and quantity when requesting a quotation.
Why Does the -25 mm Prism Constant Matter?
The Myzox TK-10S / TK-10 has a specified:
Prism Constant: -25 mm
The correct setting should be configured on the total station according to the instrument manufacturer's instructions.
Using the wrong prism constant can introduce a systematic distance offset.
This is particularly important when comparing repeated monitoring observations.
Can I Use It with My Existing Total Station?
Potential compatibility depends on factors such as:
Total station EDM capability
Prism measurement mode
Prism constant configuration
Observation distance
Required monitoring accuracy
Site geometry
When contacting MTM Precision, provide the total station brand and model if you need help evaluating the intended setup.
Monitoring Prism for Topcon Total Station Malaysia
Surveyors using suitable Topcon total stations can evaluate the Myzox monitoring prism as a fixed optical target according to their instrument configuration and monitoring requirements.
MTM Precision can also support customers requiring Topcon total station calibration and service in Malaysia.
Monitoring Prism for Manual Monitoring
A fully automated system is not always necessary.
For many projects, a surveyor can periodically observe fixed targets:
Baseline → Week 1 → Week 2 → Week 3 → Week 4
This provides a straightforward manual monitoring workflow.
Monitoring Prism for Automated Monitoring
Fixed prisms can also provide targets for suitably configured automated monitoring total station systems.
A complete automated solution may include:
Robotic or monitoring total station
Fixed prism targets
Stable reference targets
Monitoring software
Communications
Data processing
Reporting
The TK-10S / TK-10 provides the optical target component of such a system.
Why Buy Myzox from MTM Precision?
MTM Precision supports professional survey customers requiring more than simply an online product listing.
Customers can contact MTM Precision for:
Myzox product selection
Product specifications
Project quantity quotation
Availability enquiries
Total station accessory selection
Survey equipment support
Calibration and service
For monitoring projects, customers can also provide the total station model and intended application for a more useful product discussion.
Project Quantity Orders
Monitoring projects may require considerably more targets than ordinary surveying work.
Possible requirements may include:
5 pcs
10 pcs
20 pcs
50 pcs
Larger project quantities
For project orders, send the required quantity for quotation.
Availability and lead time should be confirmed when ordering.
Who Buys Myzox Monitoring Prism?
The TK-10S / TK-10 is relevant to:
Land surveyors
Engineering surveyors
Licensed survey companies
Civil engineering contractors
Main contractors
Structural consultants
Geotechnical consultants
Bridge contractors
MRT and railway contractors
Monitoring specialists
Infrastructure companies
Myzox Authorized Distributor Malaysia
For customers specifically searching for a Myzox authorized distributor in Malaysia, MTM Precision supplies Myzox surveying products and accessories for professional surveying and construction applications.
Customers can visit the MTM Precision showroom and service centre in Puchong or contact the sales team for quotation and product enquiries.
Need Total Station Calibration?
Monitoring relies on repeated measurements, so the condition of the total station is also important.
MTM Precision provides professional total station calibration and surveying instrument service in Malaysia.
Customers purchasing monitoring prisms can therefore also enquire about calibration or servicing of the total station used for the monitoring work.
Request Myzox TK-10S / TK-10 Quotation Malaysia
For faster quotation, send:
Product: Myzox TK-10S / TK-10
Quantity: ___ pcs
Total Station: Brand + Model
Application: Building / Retaining Wall / Bridge / Slope / Tunnel / Other
Project Location: Malaysia
This gives the sales team the basic information needed to respond to the enquiry.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Myzox Authorized Distributor in Malaysia
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
Contact MTM Precision for Myzox TK-10S / TK-10 Monitoring Prism price, stock availability, project quotation, total station compatibility and technical enquiries in Malaysia.
18 Aug 2026
