Heat Stress Monitoring for Delivery, Logistics and Outdoor Loading Workers Malaysia
Heat Stress Monitoring for Delivery, Logistics and Outdoor Loading Workers Malaysia
Heat stress is often associated with construction sites and factories, but Malaysia's delivery, logistics and loading workers can also spend substantial portions of their working day in hot and humid environments.
Drivers may repeatedly move between air-conditioned vehicles and outdoor locations. Warehouse teams may load containers under the afternoon sun. Courier personnel may perform deliveries throughout the hottest hours of the day.
During prolonged hot-weather periods, including conditions associated with El Niño, companies may need to pay greater attention to the environmental heat exposure experienced by these workers.
A WBGT Heat Stress Meter provides Safety and Health Officers, EHS teams, logistics operators and warehouse managers with a practical method for measuring workplace heat-stress conditions.
Which Logistics Workers Can Be Exposed to Heat?
Potentially exposed employees include:
Delivery drivers
Courier riders
Warehouse workers
Loading-bay personnel
Container loading crews
Container unloading crews
Forklift operators
Yard workers
Lorry drivers
Parcel handlers
Port workers
Distribution-centre employees
Outdoor security personnel
The level of exposure can vary considerably according to work activity and location.
Why Delivery Workers Can Face Heat Exposure
A delivery driver may have air-conditioning inside the vehicle.
However, the employee can repeatedly move through:
Air-Conditioned Vehicle → Outdoor Heat → Carry Goods → Customer Location → Vehicle → Next Delivery
This cycle may occur many times throughout the day.
Courier and parcel-delivery personnel may also perform considerable physical activity while exposed to direct sunlight.
The vehicle temperature alone therefore does not necessarily represent the worker's total working environment.
Loading Bays Can Become Hot Work Zones
Loading bays frequently combine:
Outdoor air
Solar exposure
Concrete surfaces
Limited airflow
Vehicle heat
Physical activity
Repeated material handling
Some loading bays are partially covered, while others receive direct afternoon sunlight.
Conditions may also vary between different sections of the same loading area.
This makes representative on-site measurements useful.
Shipping Containers Deserve Special Attention
Container loading and unloading can create particularly challenging thermal conditions.
Shipping containers exposed to strong sunlight may accumulate substantial heat.
Workers entering the container may experience:
Hot enclosed environment + limited airflow + physical workload
These conditions can differ significantly from the surrounding warehouse.
Therefore, measuring only the warehouse temperature may not represent conditions inside the container.
What Is WBGT?
WBGT stands for:
Wet Bulb Globe Temperature
It is an environmental heat-stress index used to assess thermal conditions affecting workers.
Depending on the instrument and measurement method, WBGT assessment can involve factors related to:
Natural wet-bulb temperature
Globe temperature
Air temperature
Humidity
Radiant thermal conditions
This makes WBGT different from a conventional temperature measurement.
Why Isn't Temperature Alone Enough?
Consider two employees.
Worker A
Air temperature: 33°C
Working inside a shaded warehouse with good airflow.
Worker B
Air temperature: 33°C
Unloading goods outdoors under direct sunlight.
Although the temperature is identical, their thermal environments are not.
Humidity, solar radiation and workload can all influence heat exposure.
A dedicated WBGT meter provides information intended specifically for heat-stress assessment.
Why Humidity Matters in Logistics Work
Malaysia's high humidity is particularly important.
The human body relies on sweat evaporation to release heat.
When humidity is high, evaporation may become less effective.
A worker carrying cartons or unloading goods can therefore experience significant thermal strain even when the temperature reading does not appear extreme.
Physical Workload Matters
Logistics can involve substantial physical activity.
Typical activities include:
Carrying cartons
Moving pallets
Loading vehicles
Unloading vehicles
Pushing trolleys
Sorting parcels
Walking between buildings
Repeated lifting
Physical activity generates body heat.
Heat-risk assessment should therefore consider:
Environmental Heat + Workload + Clothing/PPE + Exposure Duration
rather than environmental measurement alone.
WBGT Monitoring for Courier Riders
Motorcycle delivery riders represent another outdoor workforce.
They may spend many hours exposed to:
Direct sunlight
Road heat
Traffic
High humidity
Protective clothing
Helmets
A rider's work environment is constantly changing, making permanent monitoring systems less practical.
Portable heat-stress instruments can be useful when organizations need to assess representative operating conditions.
WBGT Monitoring for Distribution Centres
Large distribution centres can contain several different thermal zones.
For example:
Zone A — Air-Conditioned Office
Zone B — Main Warehouse
Zone C — Loading Bay
Zone D — Outdoor Yard
Zone E — Shipping Container
One measurement cannot necessarily represent all five locations.
Safety personnel can identify representative zones and perform measurements according to actual worker activities.
When Should Heat Measurements Be Taken?
Heat conditions change throughout the working day.
For example:
8:00 AM — Relatively cooler
11:00 AM — Increasing heat
1:00 PM — Strong solar exposure
3:00 PM — Potentially high thermal conditions
A morning measurement may therefore not represent afternoon delivery or loading conditions.
Organizations should determine appropriate measurement times according to actual work schedules and applicable heat-monitoring procedures.
WBGT Meter vs Temperature & Humidity Data Logger
Logistics companies may already use data loggers.
However, the objectives are different.
Temperature & Humidity Data Logger
Commonly used for monitoring:
Food
Pharmaceuticals
Cold-chain products
Electronics
Storage conditions
Transportation environments
The primary concern is often the product.
WBGT Heat Stress Meter
Used for assessing environmental conditions related to:
Warehouse workers
Loading crews
Delivery personnel
Yard workers
Container operations
The primary concern is the worker.
Both instruments can therefore be useful in the same logistics operation.
WBGT Meter vs Infrared Thermometer
An infrared thermometer is also useful in logistics, but it measures surface temperature.
Typical applications include:
Equipment
Refrigeration systems
Machinery
Vehicle components
Surfaces
A WBGT meter serves a different purpose:
Infrared Thermometer → Surface Temperature
WBGT Meter → Environmental Heat Stress
Understanding this distinction helps safety departments select the correct instrument.
El Niño and Malaysian Logistics Operations
Prolonged hotter and drier conditions can affect a wide range of outdoor and semi-outdoor work.
Logistics businesses may therefore consider establishing baseline heat measurements before extreme conditions occur.
A simple process can be:
Identify Exposed Workers
↓
Identify Heat-Prone Locations
↓
Establish Baseline WBGT
↓
Monitor During Hot Periods
↓
Maintain Measurement Records
↓
Review Heat Controls
This provides actual workplace measurements rather than relying only on how hot employees feel.
Heat Management After Measurement
A WBGT meter provides environmental information.
Organizations should interpret results using applicable workplace safety procedures and professional guidance.
A broader heat-risk program may consider:
Hydration
Rest periods
Shade
Ventilation
Work scheduling
Worker rotation
Acclimatization
Clothing and PPE
Exposure duration
Worker heat-awareness training
Measurement is therefore one part of a complete heat-management process.
Tenmars WBGT Heat Stress Meters for Logistics
Tenmars offers professional environmental instruments suitable for occupational heat-stress monitoring.
Tenmars TM-288
Portable WBGT Heat Stress Meter suitable for warehouse, logistics and workplace measurements.
Tenmars TM-188B
Heat Stress WBGT Meter featuring BLE wireless capability, useful where wireless monitoring and data handling are required.
Tenmars TM-188D
Professional WBGT Heat Stress Meter suitable for occupational and environmental heat monitoring.
The suitable model depends on the organization's measurement, logging and connectivity requirements.
Who May Need a WBGT Meter?
Potential users include:
Logistics companies
Distribution centres
Courier companies
E-commerce fulfilment centres
Warehouses
3PL operators
Transport companies
Port operators
Safety and Health Officers
EHS / HSE departments
Facility management companies
Environmental Instruments for Logistics Safety
WBGT can also complement other instruments used in logistics facilities.
WBGT Meter — Worker heat-stress monitoring
Temperature/Humidity Data Logger — Storage and environmental records
Anemometer — Air velocity and ventilation
Gas Detector — Atmospheric safety where required
Sound Level Meter — Workplace noise
Lux Meter — Warehouse lighting
This allows safety departments to build a broader workplace environmental monitoring toolkit.
Tenmars WBGT Meter Supplier for Logistics Malaysia
MTM Precision supplies professional Tenmars Heat Stress WBGT Meters and environmental testing instruments in Malaysia.
Applications include:
Logistics • Warehouse • Distribution Centre • Loading Bay • Container Operations • Courier • Transport • EHS • HSE • Occupational Safety
Contact our team with your application and measurement requirements for assistance selecting a suitable instrument.
MTM Precision Sdn Bhd
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Looking for a WBGT Heat Stress Meter for logistics, warehouse, loading or delivery workers in Malaysia? Contact MTM Precision for Tenmars WBGT Meter selection and quotation.
20 Aug 2026