WBGT Heat Stress Monitoring for Welding and Fabrication Workers Malaysia
WBGT Heat Stress Monitoring for Welding and Fabrication Workers Malaysia
Welding and metal fabrication workers can face heat from two directions at the same time:
the surrounding environment and the work process itself.
In Malaysian workshops, factories, shipyards and construction sites, welders may work in hot and humid conditions while also being exposed to radiant heat from welding, hot metal, cutting processes and nearby machinery.
Protective clothing and PPE can add another layer of thermal burden.
During prolonged periods of hot weather, monitoring these conditions can become increasingly important for Safety and Health Officers, HSE teams and fabrication companies.
A WBGT Heat Stress Meter provides a practical method for assessing environmental heat-stress conditions around welding and fabrication work areas.
Why Welders Can Face Significant Heat Stress
Welding work can combine several factors:
High ambient temperature
High humidity
Radiant heat
Hot metal
Welding processes
Physically demanding work
Heavy protective clothing
Gloves
Welding helmet
Safety footwear
Limited ventilation
Long working periods
Even when the workshop air temperature does not appear extreme, the worker's total thermal environment may still be demanding.
Heat From the Process Matters
A welder does not experience only the surrounding air temperature.
Additional thermal exposure can come from:
Welding arcs
Heated workpieces
Cutting operations
Furnaces
Hot fabrication materials
Nearby machinery
Industrial processes
This means a normal wall thermometer may not provide enough information to understand heat-stress conditions at the actual workstation.
What Is WBGT?
WBGT stands for:
Wet Bulb Globe Temperature
It is an environmental heat-stress index used in occupational heat assessment.
Depending on the instrument and measurement method, WBGT assessment considers factors related to:
Natural wet-bulb temperature
Globe temperature
Air temperature
Humidity
Radiant thermal conditions
WBGT therefore provides information specifically intended for evaluating thermal environments affecting workers.
Why Is the Black Globe Important?
A WBGT meter commonly includes a black globe sensor.
The globe helps assess radiant thermal conditions.
This can be especially relevant in welding and fabrication environments where workers may be positioned near hot materials or equipment.
The air temperature alone may not fully represent this radiant thermal load.
PPE Makes Welding Different
Welding PPE is essential.
Depending on the work, welders may wear:
Welding helmet
Face shield
Leather gloves
Protective clothing
Welding jacket
Safety footwear
Respiratory protection
Other specialized PPE
These items protect against serious hazards such as sparks, radiation, fumes and hot materials.
However, protective clothing can also affect the body's ability to release heat.
Therefore, heat-risk assessment should consider:
Environmental Conditions + Workload + PPE + Exposure Duration
rather than relying only on a WBGT number.
Indoor Welding Can Still Be Hot
A common assumption is:
Indoor work = lower heat risk.
This is not always true.
A fabrication workshop may contain:
Multiple welding stations
Cutting equipment
Compressors
Machinery
Hot workpieces
Limited ventilation
Metal roofing
During hot weather, the indoor environment can become increasingly warm.
WBGT measurements can help identify differences between work areas.
Outdoor Welding
Welding also takes place outdoors.
Examples include:
Construction sites
Pipeline work
Structural steel installation
Shipyards
Plant maintenance
Tank maintenance
Infrastructure projects
Outdoor welders may experience:
Process Heat + Direct Sunlight + High Humidity + PPE
This combination makes representative workplace heat monitoring particularly useful.
Heat Stress During Shutdown and Maintenance Work
Industrial shutdowns often involve substantial amounts of hot work.
Contractors may perform:
Welding
Cutting
Grinding
Pipe repair
Structural repair
Equipment replacement
Tank maintenance
Work schedules can be intensive and some activities may take place in hot industrial environments.
HSE teams can use portable WBGT instruments to monitor representative work locations during these projects.
WBGT Meter vs Infrared Thermometer
Fabrication companies may already own infrared thermometers.
However, they measure something different.
Infrared Thermometer
Measures surface temperature.
Useful for:
Metal surfaces
Machinery
Bearings
Pipes
Equipment
WBGT Heat Stress Meter
Used for environmental heat-stress assessment.
Useful for:
Welders
Fabrication workers
Maintenance personnel
Outdoor hot-work teams
Therefore:
How hot is the metal? → Infrared Thermometer
What are the environmental heat conditions affecting the worker? → WBGT Meter
WBGT Meter vs Thermal Imager
Thermal imaging is valuable for industrial inspection.
It can help identify:
Hot electrical components
Overheated motors
Bearings
Process abnormalities
Thermal distribution
However, a thermal imager is not designed to replace a WBGT meter for occupational heat-stress assessment.
Both can form part of an industrial maintenance and safety toolkit.
What About Welding Fumes?
Heat stress and welding fumes are separate occupational concerns.
A WBGT meter measures heat-stress-related environmental parameters.
It does not measure welding fumes or toxic gases.
Depending on the workplace and assessment objective, other instruments or professional sampling methods may be required for airborne contaminants.
This distinction is important when selecting occupational safety equipment.
When Should WBGT Measurements Be Taken?
Potential situations include:
Long welding operations
Hot workshops
Outdoor welding
Shutdown work
Fabrication near furnaces
Heavy PPE use
Hot-weather periods
Poorly ventilated areas
Measurements should represent the actual location and time where employees perform their work.
Measure at the Welding Area
A reading taken at the office entrance may tell you very little about the conditions at a welding station.
Similarly:
Workshop entrance → Moderate
does not necessarily mean:
Welding station → Moderate
Heat sources can be highly localized.
For large fabrication facilities, several representative measurement points may therefore be useful.
El Niño and Fabrication Workshops in Malaysia
During prolonged hotter weather, workshops that already experience elevated temperatures may become even more challenging.
Companies can prepare by establishing baseline conditions before peak heat periods.
A simple process can be:
Identify Hot Work Areas
↓
Establish Baseline WBGT
↓
Measure During Representative Operations
↓
Monitor Hot-Weather Conditions
↓
Maintain Records
↓
Review Appropriate Controls
This provides actual environmental measurements to support the organization's safety program.
Heat-Risk Controls
WBGT measurement is only one part of heat-risk management.
Depending on the workplace and applicable procedures, organizations may also review:
Ventilation
Local cooling
Hydration
Work/rest scheduling
Exposure duration
Worker rotation
Acclimatization
PPE
Work intensity
Heat-awareness training
Organizations should interpret WBGT measurements according to applicable occupational safety requirements and professional guidance.
Tenmars WBGT Heat Stress Meters
Tenmars provides professional instruments for occupational and environmental heat monitoring.
Tenmars TM-288
Portable WBGT Heat Stress Meter suitable for workshops, factories and industrial workplaces.
Tenmars TM-188B
Heat Stress WBGT Meter featuring BLE wireless capability, useful where wireless monitoring and data handling are required.
Tenmars TM-188D
Professional WBGT Heat Stress Meter suitable for occupational and environmental monitoring applications.
Model selection should consider measurement, logging, alarm and connectivity requirements.
Who May Need a WBGT Meter?
Potential users include:
Welding contractors
Fabrication workshops
Steel fabricators
Shipyards
Construction contractors
Oil & gas contractors
Maintenance companies
Manufacturing plants
Safety and Health Officers
HSE / EHS departments
Occupational safety consultants
Build a Welding & Fabrication Safety Instrument Kit
WBGT monitoring can complement other industrial safety and maintenance instruments.
WBGT Meter — Heat-stress monitoring
Sound Level Meter — Workplace noise
Gas Detector — Atmospheric gas hazards where applicable
Infrared Thermometer — Surface temperature
Thermal Imager — Thermal inspection
Anemometer — Air velocity / ventilation checks
Lux Meter — Workplace lighting
Vibration Meter — Machinery condition monitoring
This creates a broader workplace safety + industrial maintenance solution.
Tenmars WBGT Meter Supplier for Welding & Fabrication Malaysia
MTM Precision supplies professional Tenmars Heat Stress WBGT Meters and industrial testing instruments in Malaysia.
Applications include:
Welding • Fabrication • Manufacturing • Shipyard • Construction • Industrial Maintenance • Shutdown • HSE • EHS • Occupational Safety
Contact our team with your application and measurement requirements for assistance selecting a suitable instrument.
MTM Precision Sdn Bhd
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Looking for a WBGT Heat Stress Meter for welding, fabrication or hot-work applications in Malaysia? Contact MTM Precision for Tenmars WBGT Meter selection and quotation.
20 Aug 2026