Chemical Smell in Factory What Should You Test Malaysia

Chemical Smell in Factory What Should You Test Malaysia A factory worker reports: “There is a strong chemical smell in this area.” Another employee says: “The smell becomes stronger when production starts.” The immediate reaction may be: “We need a gas detector.” But which gas? A chemical smell can come from many different sources, and one detector cannot identify every possible contaminant. The correct starting point is not the instrument. It is the process and possible source. A typical investigation may involve: Process Identification → Chemical Information → VOC → Specific Gas → Ventilation → Temperature & Humidity → Continuous Monitoring 1. First Identify Where the Smell Comes From Start with the work process. Possible sources include: Paint Solvents Adhesives Cleaning chemicals Printing processes Coating operations Chemical storage Production chemicals Fuel Waste handling Maintenance chemicals Newly installed materials Ask: When did the smell begin? Where is it strongest? Does it happen only during production? Was a new chemical introduced? Does it disappear when equipment stops? These questions can help narrow the investigation. 2. Don't Assume Every Chemical Smell Is the Same “Chemical smell” is a description, not a measurement parameter. Different processes can involve different substances. For example: Painting Area may require investigation of solvent vapours or VOCs. Generator Room may require consideration of combustion-related gases such as carbon monoxide. Wastewater Area may involve completely different gases. Confined Space may require oxygen, flammable gas and toxic-gas monitoring. The instrument must match the suspected hazard. 3. Check the Chemical Information If the factory knows which chemical is being used, review the relevant safety information and process details. Important information may include: Chemical name Ingredients Process Storage method Ventilation requirements Possible vapours Known exposure concerns This is much better than choosing a detector based only on the fact that something smells unusual. 4. When Is a VOC Meter Useful? VOC means Volatile Organic Compounds. VOC measurement may be useful when investigating environments involving: Solvents Paint Adhesives Printing Cleaning agents Coatings Certain manufacturing chemicals A VOC instrument can help with screening and comparison where appropriate. For example: Production OFF → VOC Measurement versus Production ON → VOC Measurement or: Outside Area → Measurement versus Worker Position → Measurement versus Near Chemical Source → Measurement This can help identify patterns. 5. A VOC Reading Does Not Identify Every Chemical This is important. A general VOC measurement should not automatically be interpreted as identifying a specific compound. If the factory needs to determine the concentration of a particular hazardous substance, a more specific measurement method or instrument may be required. Therefore, the question should be: “What substance are we trying to detect?” not simply: “Do you have a VOC meter?” 6. Check for Specific Gases Where Relevant Depending on the process, the investigation may require a detector designed for a specific gas. Examples of gases encountered in different industrial environments can include: Carbon monoxide Hydrogen sulphide Oxygen Combustible gases Other process-specific gases A multi-gas detector can be useful for certain applications, but it does not detect every industrial gas. Always match the sensor configuration to the expected hazard. 7. Ventilation May Be Part of the Problem Sometimes the chemical source is known, but vapours are accumulating because ventilation is inadequate. Possible issues include: Exhaust fan not operating properly Blocked duct Insufficient extraction Poor air movement Process modification Increased production Doors or vents being closed Poorly positioned exhaust point An airflow meter or anemometer may therefore become part of the investigation. The measurement chain could become: Chemical Source → VOC / Gas → Airflow → Ventilation Investigation 8. Compare the Source and Worker Position Do not measure only directly beside the chemical container. The important question may be: What is happening where employees actually work? Possible measurement locations include: Chemical Source ↓ Operator Position ↓ Nearby Production Area ↓ Ventilation Exhaust ↓ Adjacent Room ↓ Outside Reference Area Comparing locations can reveal useful patterns. 9. Check Whether the Problem Changes With Time Suppose workers say: “The smell is okay in the morning but very strong after lunch.” That is useful information. The problem may change according to: Production volume Temperature Ventilation Shift activity Chemical usage Cleaning schedules Machine operation A single measurement at 9:00 AM may completely miss the problem occurring at 3:00 PM. Repeated measurements or data logging may therefore be necessary. 10. Temperature Can Affect Vapour Conditions Environmental conditions can influence how certain chemicals evaporate and how workers perceive the environment. Therefore, supporting measurements such as: Temperature and Relative Humidity may also be useful when investigating changing workplace conditions. 11. Example: Strong Solvent Smell Near Production Line A customer tells MTM: “Our workers complain about a strong solvent smell around the production line. What meter should we buy?” Instead of immediately recommending one model, the investigation should begin with questions. What solvent is being used? Is the chemical information available? Where is it used? Is there local exhaust ventilation? When is the smell strongest? How close are workers to the source? Is the objective general screening or measurement of a specific substance? A possible measurement pathway could be: Identify Chemical ↓ Review Process ↓ VOC Screening Where Appropriate ↓ Specific Gas Measurement If Required ↓ Airflow / Ventilation Check ↓ Compare Worker and Source Locations ↓ Repeat During Different Production Conditions That is a much more useful solution than simply buying a random gas detector. What Instruments Might Be Needed? Depending on the application, possible instruments can include: VOC Meter For appropriate volatile organic compound screening applications. Specific Gas Detector When a known gas needs to be detected or monitored. Multi-Gas Detector For applications requiring a suitable combination of gas sensors. Carbon Monoxide Detector Where combustion-related CO is a concern. Anemometer For investigating airflow and ventilation. Temperature & Humidity Meter For supporting environmental measurements. Data Logger When conditions need to be recorded over time. Not every application requires all of these instruments. The correct solution depends on the actual problem. Smell Is a Warning Measurement Identifies the Problem Human smell can alert workers that something has changed. But smell alone should not be used to determine whether an atmosphere is safe. Some hazardous gases may not provide a reliable warning through smell, while some strong odours can be noticeable at relatively low concentrations. That is why industrial safety decisions should rely on appropriate hazard assessment and measurement. From Chemical Complaint to Measurement Solution Instead of: Chemical Smell → Buy Gas Detector MTM's approach is: Chemical Smell ↓ Identify Process ↓ Identify Possible Substance ↓ Determine Measurement Parameter ↓ Select Appropriate Detector ↓ Check Ventilation ↓ Measure at Relevant Locations ↓ Monitor Changes ↓ Take Corrective Action ↓ Verify Again This is the difference between selling an instrument and solving a measurement problem. Factory Environmental & Safety Measurement Solutions Malaysia MTM Precision supports industrial customers with measurement solutions for: VOC Gas Detection Confined Space Carbon Monoxide Indoor Air Quality PM2.5 / PM10 Temperature & Humidity Airflow Heat Stress Noise Vibration Industrial Maintenance You do not need to know the exact instrument model before contacting us. Tell us what is happening in your factory. Need Help Investigating a Chemical Smell? Tell MTM: What chemical or process is involved? Where does the smell occur? When does it happen? Are workers located near the source? What are you trying to detect or measure? We can help identify suitable measurement options for the application. MTM Precision Sdn Bhd Showroom & Service Centre No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia WhatsApp: +6016-660 7346 Email: mtmpre@yahoo.com Wesite: www.mtmpre.com.my Tell us your testing problem. MTM will help you find the right measurement solution.

21 Aug 2026