Warehouse Environmental Problems What Should You Measure Malaysia

Warehouse Environmental Problems What Should You Measure Malaysia A warehouse manager may report: “The warehouse gets very hot in the afternoon.” “Some products are affected by humidity.” “We don't know what happens overnight.” “Certain areas are too dark.” “Workers say the air feels stuffy.” These are not necessarily separate problems. A warehouse environment can change according to: Temperature → Humidity → Ventilation → Occupancy → Lighting → Time of Day The correct starting point is therefore not: “Which warehouse meter should we buy?” It is: “What environmental condition are we trying to understand, and do we need a single reading or a long-term record?” 1. Start With What the Warehouse Stores Different products can have different environmental requirements. Warehouses may contain: Electronic equipment Electrical components Instruments Paper products Packaging Food ingredients Chemicals Building materials Metal components Spare parts Finished goods Raw materials Before selecting an instrument, ask: What are you storing? Which environmental condition is causing concern? Is the concern product quality, worker comfort, safety or all three? 2. Measure Temperature Temperature is one of the most common warehouse environmental parameters. Conditions may vary significantly between: Morning Afternoon Night Ground level Upper racks Areas near doors Areas near the roof Air-conditioned zones Non-air-conditioned zones One temperature reading at the warehouse office may not represent conditions throughout the building. 3. Humidity Can Be Equally Important Relative humidity can affect certain stored products and materials. A warehouse may experience higher humidity because of: Weather Rain Poor ventilation Open loading bays Building condition Air-conditioning operation Moisture entering from outside A temperature and humidity meter can provide a quick check. But if conditions change throughout the day, a logger may provide much more useful information. 4. Spot Measurement or Data Logging? This is one of the most important decisions. Suppose a warehouse manager measures: 28°C at 10:00 AM Does that mean the warehouse remains at 28°C all day? No. Conditions might be: 8:00 AM → 26°C 12:00 PM → 30°C 3:00 PM → 34°C 6:00 PM → 31°C A single spot measurement would miss the peak. For changing conditions: Temperature / Humidity Data Logger can provide a time-based record. 5. Monitor Overnight and Weekends Many warehouse problems happen when nobody is watching. For example: Air-conditioning switches off Ventilation changes Doors remain closed Temperature rises Humidity changes Weekend conditions differ from weekdays Continuous logging allows the facility team to see what happened when personnel were not present. 6. Measure Different Warehouse Zones Large warehouses should not automatically be treated as one uniform environment. A useful comparison might include: Zone A Loading Bay Zone B Ground-Level Storage Zone C Upper Rack Zone D Centre of Warehouse Zone E Near Roof Zone F Air-Conditioned Area Zone G Office Measurements can reveal whether certain areas consistently behave differently. 7. Upper Racks May Have Different Conditions Heat can accumulate differently around high storage areas. If products are stored on tall racking, measuring only at ground level may not provide the complete picture. Depending on the warehouse layout, measurements at different heights may help identify temperature or humidity differences. 8. Loading Bays Can Affect Conditions Warehouse doors may open frequently for: Trucks Forklifts Deliveries Loading Unloading This can change: Temperature Humidity Air movement Dust Indoor air conditions If a problem occurs near the loading bay, compare that area with locations deeper inside the warehouse. 9. Ventilation May Need Investigation A warehouse that becomes extremely hot may also have poor air circulation. Possible investigation: Temperature ↓ Humidity ↓ Air Velocity ↓ Ventilation An anemometer can help quantify air movement at relevant locations. This is especially useful when evaluating changes involving fans or ventilation systems. 10. Workers May Complain About Stuffy Air Some warehouses have: Enclosed packing areas Offices Control rooms Staff areas High occupancy zones If workers complain about stuffiness, possible measurements may include: CO → Temperature → Humidity → Airflow Depending on the environment, additional indoor air quality parameters may also be relevant. 11. Forklift and Vehicle Activity Can Change the Problem Where vehicles or combustion equipment operate inside or around enclosed areas, the environmental investigation may need to consider appropriate gas monitoring. The exact parameter depends on: Equipment type Fuel Ventilation Operating location Work procedure Do not assume that a general air quality meter measures every possible gas. 12. Dust May Enter or Accumulate Warehouses can also experience particulate problems due to: Vehicle movement Loading activity Construction nearby Packaging Powder products Open doors Material handling Where particulate conditions are a concern, appropriate PM2.5 / PM10 screening can form part of the investigation. 13. Lighting Is Another Warehouse Measurement Problem Poor lighting can affect: Picking Packing Barcode reading Inspection Loading Walking routes Workstations Instead of relying on: “This area looks dark.” a lux meter can quantify illumination. Compare locations such as: Packing Station Storage Aisle Loading Area Inspection Table Walkway Measurements can also be repeated after lighting improvements. 14. Example: Products Are Damaged but Nobody Knows Why Suppose a customer says: “Some of our stored products are affected, and we suspect heat or humidity.” Buying a handheld thermometer and checking once may not answer the question. A better measurement approach could be: Identify Product Requirement ↓ Install Temperature / Humidity Logger ↓ Record Several Days ↓ Compare Warehouse Zones ↓ Identify Peak Conditions ↓ Investigate Ventilation / HVAC ↓ Corrective Action ↓ Monitor Again Now the warehouse has data instead of assumptions. 15. Example: Warehouse Is Extremely Hot Every Afternoon Another customer says: “Our warehouse becomes very hot around 2 PM.” Possible measurement pathway: Temperature ↓ Relative Humidity ↓ b>Compare Ground / Upper Rack ↓ Air Velocity ↓ Check Ventilation ↓ Data Logging ↓ Compare Morning / Afternoon / Night If workers are exposed to significant heat, occupational heat-stress measurement may also need to be considered. What Instruments Might Be Needed? Depending on the problem, warehouse environmental monitoring may involve: Temperature & Humidity Meter For spot measurements. Temperature / Humidity Data Logger For continuous records and trend analysis. Anemometer For air velocity and ventilation investigation. Lux Meter For workplace illumination measurement. CO / Indoor Air Quality Meter For appropriate occupied-space investigations. Particulate Meter For PM2.5 / PM10 screening where dust is a concern. Gas Detector Where a specific gas hazard has been identified. WBGT Meter Where occupational heat stress needs to be assessed. Not every warehouse needs all these instruments. The measurement solution depends on the actual problem. One Warehouse Can Have Several Measurement Problems A warehouse may simultaneously need to understand: Product Storage Conditions → Temperature + Humidity Changing Conditions → Data Logging Poor Ventilation → Air Velocity Worker Comfort → Temperature + Humidity + CO Dust → PM2.5 / PM10 Poor Lighting → Lux Heat Exposure → WBGT This is why the customer should not need to search for seven unrelated product categories. They can simply tell MTM: “We have an environmental problem in our warehouse.” From Warehouse Problem to Measurement Solution MTM's approach is: Identify the Problem ↓ Understand What Is Stored ↓ Determine Measurement Parameters ↓ Choose Spot or Continuous Monitoring ↓ Compare Different Zones ↓ Identify Trends ↓ Take Corrective Action ↓ Measure Again The objective is not to sell the largest number of meters. The objective is to help the customer collect the measurements needed to understand the problem. Factory & Warehouse Environmental Monitoring Solutions Malaysia MTM Precision supports: Factories Warehouses Distribution centres Facility managers EHS departments Maintenance teams Engineers Contractors with testing and measurement solutions covering: Temperature Humidity Data Logging Airflow CO Indoor Air Quality PM2.5 / PM10 Lux WBGT Gas Detection Industrial Environmental Monitoring The principle is simple: You tell us the problem. We help identify what needs to be measured. Need Help Monitoring Your Warehouse? Tell MTM: What are you storing? What problem are you experiencing? Where does it happen? When does it happen? Do you need a spot measurement or continuous records? We can help identify suitable measurement options for the application. MTM Precision Sdn Bhd Showroom & Service Centre No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia WhatsApp: +6016-660 7346 Email: mtmpre@yahoo.com Website: www.mtmpre.com.my Tell us your testing problem. MTM will help you find the right measurement solution.

21 Aug 2026