Why Is Refrigerated Truck Temperature Normal but Cargo Still Damaged Malaysia
Why Is Refrigerated Truck Temperature Normal but Cargo Still Damaged Malaysia
A refrigerated truck arrives at the customer's warehouse.
The refrigeration controller shows the expected temperature, but some of the food, seafood or other temperature-sensitive cargo appears to be in poor condition.
This creates an obvious question:
If the refrigerated truck temperature was normal, why was the cargo still affected?
One reason is that the temperature shown by the refrigeration system does not necessarily tell you everything that happened to the cargo throughout the journey.
A shipment-level temperature data logger, such as the Azovtes AE-UT or AE-BUT, can provide additional information by recording temperature at the selected location together with the goods.
Truck Temperature and Cargo Temperature Are Not Always the Same
A refrigerated vehicle's temperature sensor and the products may be located in different positions.
For example, the refrigeration system may measure temperature near an air inlet or return-air location.
The cargo could be several metres away.
Actual conditions around the products can be influenced by:
Cargo position
Air circulation
Loading pattern
Door opening
Product temperature before loading
Packaging
Number of delivery stops
Location within the truck
Therefore, seeing the correct temperature on the controller does not automatically prove that every carton experienced identical conditions.
Reason 1: Poor Air Circulation
Refrigerated transportation depends heavily on airflow.
If products are packed too tightly or airflow paths are blocked, some parts of the cargo may experience different conditions.
This can create localised temperature differences.
A logger positioned with the shipment can provide additional information about conditions at that location.
For larger or higher-value loads, multiple monitoring points may be useful.
Reason 2: Products Were Too Warm Before Loading
A refrigerated truck is not always intended to rapidly cool products that enter the vehicle at an inappropriate temperature.
If chilled or frozen goods are loaded warmer than required, the cargo may already have experienced a temperature problem before transportation begins.
This is why monitoring can start before or during loading rather than only after the truck leaves.
Reason 3: The Door Was Open Too Long
Door opening can have a significant effect on local conditions.
This is especially relevant for multi-drop delivery routes.
A truck may stop at:
Customer A → Customer B → Customer C → Customer D
Every stop can involve opening the cargo compartment.
Products near the door may experience different temperature conditions from products located deeper inside the load.
Reason 4: The Refrigeration System Temporarily Stopped
The controller may show a normal temperature when the truck reaches its destination.
But that does not tell you whether a problem occurred earlier.
For example:
8:00 AM — Departure
10:30 AM — Refrigeration interruption
11:30 AM — System restored
1:00 PM — Temperature recovering
3:00 PM — Delivery
At 3:00 PM, the display may appear normal.
Without historical data, the earlier event could be missed.
Reason 5: Loading Took Too Long
Cold-chain problems can happen before the truck starts moving.
Products may remain at a loading bay while workers:
Prepare documents
Arrange pallets
Wait for a truck
Load other products
Resolve delivery issues
A temperature logger travelling with the shipment can provide information covering more than just the driving period.
Reason 6: Different Areas of the Truck Have Different Conditions
A refrigerated truck is not necessarily thermally uniform.
Conditions may differ:
Near the door
Near the refrigeration outlet
At the centre of the load
Between tightly packed pallets
Near walls
At different heights
This is one reason a single monitoring point may not be sufficient for every application.
Reason 7: Packaging Affects Product Temperature
The logger measures temperature at its monitoring location.
The actual product temperature may respond differently depending on packaging and thermal mass.
For example, insulated packaging may slow temperature changes.
Conversely, poorly insulated goods may respond more quickly to changes in surrounding conditions.
This distinction is important when interpreting logger data.
Reason 8: Frequent Delivery Stops
Local distribution routes can be challenging for cold-chain control.
A refrigerated vehicle may make many stops in one day.
At each stop:
Park → Open Door → Unload → Close Door → Refrigeration Recovers
Repeated cycles can create temperature fluctuations.
A data logger can help reveal whether these fluctuations are occurring around the monitored shipment.
Why a Handheld Thermometer May Miss the Problem
Handheld thermometers are useful for spot checks.
However, they answer:
“What is the temperature right now?”
A data logger answers a different question:
“What happened to the temperature over time?”
For cold-chain troubleshooting, both types of measurement can be valuable.
Using Azovtes AE-UT
The Azovtes AE-UT Disposable Temperature Data Logger is suitable for shipment-level monitoring where USB-based data access is required.
The logger can travel with the cargo and record temperature during transportation.
At the destination, the recorded history can be reviewed.
This makes it useful for:
Food deliveries
Frozen-food transportation
Seafood logistics
Fresh produce
Pharmaceutical shipments
Export cargo
Using Azovtes AE-BUT
The Azovtes AE-BUT adds Bluetooth connectivity for compatible mobile access.
This can be convenient for logistics, warehouse and QA personnel who need an additional method of accessing the recorded temperature information.
Where Should You Place the Logger?
There is no single placement that is ideal for every shipment.
The monitoring position should be selected according to the purpose of the test and the company's procedure.
Possible positions include:
With a selected carton
Between selected pallets
Near the centre of the load
Near the rear door
At multiple positions for larger loads
If you are troubleshooting temperature variation, using several loggers can provide more information than one logger alone.
Example: Three Loggers Tell a Better Story
Suppose three loggers are placed inside a refrigerated truck.
At the end of the journey:
Logger A — Front: Temperature relatively stable
Logger B — Middle: Temperature relatively stable
Logger C — Rear Door: Repeated temperature increases
This pattern provides more useful information than simply knowing the refrigeration controller temperature.
It may help the company investigate loading, airflow or door-opening practices.
Temperature Data Does Not Automatically Identify the Cause
A logger records temperature.
It does not automatically tell you why the temperature changed.
To investigate the cause, compare the temperature history with:
Delivery schedule
Door-opening times
Loading records
Refrigeration maintenance
Driver records
Traffic delays
Power interruptions
Product loading temperature
Combining these records can provide a much clearer picture.
Which Businesses Should Monitor Refrigerated Deliveries?
Potential users include:
Frozen-food manufacturers
Seafood suppliers
Meat distributors
Dairy suppliers
Fresh produce companies
Pharmaceutical distributors
Supermarket suppliers
Hotels and restaurant suppliers
Cold-chain logistics companies
Refrigerated transport operators
Don't Monitor Only the Machine — Monitor the Shipment
This is the key point.
The refrigeration system tells you about the refrigeration equipment.
A shipment-level logger provides information from the location where the logger travels with the cargo.
For important cold-chain shipments, both sources of information can be useful.
Looking for a Refrigerated Transport Temperature Data Logger in Malaysia?
MTM Precision supplies temperature monitoring instruments for food, pharmaceutical, cold-chain, refrigerated transportation, warehousing and logistics applications.
The Azovtes AE-UT and AE-BUT Disposable Temperature Data Loggers are designed for suitable shipment-level temperature recording applications.
Tell us:
What are you transporting?
What temperature range is required?
How long is the delivery route?
How many stops does the truck make?
How large is the load?
How many monitoring points do you require?
MTM Precision can help you evaluate an appropriate temperature monitoring solution.
Contact MTM Precision
MTM Precision Sdn Bhd
Showroom & Service Centre:
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
23 Aug 2026