Tank & Vessel 4 Gas Detector Malaysia Fosensor FS11301 Pump Suction

# Tank & Vessel 4 Gas Detector Malaysia – Fosensor FS11301 Pump Suction Looking for a 4 Gas Detector for Tank or Vessel Gas Testing in Malaysia? Where atmospheric testing requires simultaneous monitoring of: O2 + EX / LEL + H2S + CO the Fosensor FS11301 Portable 4-in-1 Gas Detector provides all four measurements in one portable instrument. The FS11301 is available in: Natural Diffusion and Pump Suction For applications where active gas sampling is required, the FS11301 Pump Suction provides an important additional capability. ## What Does the Fosensor FS11301 Measure? The standard FS11301 configuration simultaneously monitors: - O2 – Oxygen - EX / LEL – Combustible Gas - H2S – Hydrogen Sulphide - CO – Carbon Monoxide The specified measuring ranges are: | Gas | Measuring Range | Resolution | |---|---:|---:| | O2 | 0–30% VOL | 0.1% VOL | | EX / LEL | 0–100% LEL | 1% LEL | | H2S | 0–100 ppm | 1 ppm | | CO | 0–1000 ppm | 1 ppm | Before selecting a detector for tank or vessel testing, confirm that these are the gases that actually need to be monitored. ## Why Use a 4 Gas Detector for Tank Testing? A tank can be associated with different atmospheric conditions depending on: - Previous contents - Current contents - Process - Cleaning activity - Maintenance activity - Ventilation - Identified workplace hazards Therefore, there is no universal “tank gas detector” suitable for every tank. The correct approach is to identify the gases first. Where the required measurements are: O2 + LEL + H2S + CO the FS11301 provides all four channels simultaneously. ## Why Is Oxygen Measurement Important? The FS11301 oxygen channel provides: Measuring Range: 0–30% VOL Resolution: 0.1% VOL The manufacturer lists: Low Alarm: 19.5% VOL High Alarm: 23.5% VOL This allows oxygen concentration to be displayed together with LEL, H2S and CO. The applicable workplace requirements should determine how readings and alarm settings are interpreted. ## LEL Measurement The FS11301 combustible-gas channel provides: Measuring Range: 0–100% LEL Resolution: 1% LEL The manufacturer lists: Low Alarm: 20% LEL High Alarm: 50% LEL This allows combustible-gas concentration to be monitored as part of the four-gas display. ## H2S Measurement The H2S channel provides: Measuring Range: 0–100 ppm Resolution: 1 ppm Manufacturer-listed alarm points: Low Alarm: 10 ppm High Alarm: 35 ppm Where H2S is one of the identified gases requiring monitoring, the FS11301 can measure it simultaneously with the other three channels. ## CO Measurement The FS11301 CO channel provides: Measuring Range: 0–1000 ppm Resolution: 1 ppm Manufacturer-listed alarm points: Low Alarm: 50 ppm High Alarm: 150 ppm This gives users simultaneous CO monitoring alongside O2, LEL and H2S. ## Natural Diffusion vs Pump Suction for Tank Testing The two FS11301 configurations use different sampling methods. This distinction is particularly important when buyers are considering a detector for tank or vessel applications. ### FS11301 Natural Diffusion The surrounding atmosphere reaches the detector naturally. Specified dimensions: 135 × 68 × 43 mm This version can be considered when professional four-gas monitoring is required without active sampling. ### FS11301 Pump Suction The Pump version actively draws a gas sample toward the detector. Specified dimensions: 150 × 68 × 60 mm The key additional capability is: Active Gas Sampling Therefore, where the required testing procedure calls for active sampling, the Pump Suction version should be considered. ## Why Buy the Pump Version? The reason to buy the Pump version should not simply be: “It is the higher model.” The actual reason is: “My testing procedure requires active gas sampling.” This distinction matters. The supplied Fosensor documentation does not state that the Pump version is automatically more accurate than the Natural Diffusion version. Its major advantage is the ability to actively draw a gas sample. ## Is Pump Suction Necessary for Every Tank? No. Do not assume that every tank or vessel application automatically requires the Pump model. The correct sampling method depends on the applicable testing procedure. Before choosing, determine: 1. What gases need to be monitored? 2. Where does the sample need to be taken? 3. Is active sampling required? 4. What measuring ranges are required? 5. What workplace procedure applies? Only then should Natural Diffusion or Pump Suction be selected. ## Can the FS11301 Pump Version Convert to Natural Diffusion? Yes. This is one of the useful features of the FS11301 Pump configuration. According to Fosensor's operating instructions, the Pump Suction module can be removed and replaced with the Natural Diffusion front cover. The procedure involves: 1. Remove the four screws at the rear of the instrument. 2. Remove the Pump Suction module. 3. Install the Natural Diffusion front cover. 4. Tighten the four screws again. After conversion, the detector can operate in Natural Diffusion mode. This provides flexibility for users who perform different types of gas-monitoring work. ## Is the Pump Version Only for Tanks? No. Pump Suction is a sampling method rather than a tank-specific feature. The FS11301 Pump version should be selected when active gas sampling is required by the application. Fosensor lists broader applications for the FS11301 including: - Petroleum - Chemical Industry - Environmental Protection - Metallurgy - Refining - Gas Transmission and Distribution - Biochemical - Pharmaceuticals - Agriculture The detector should always be matched to the actual gas and sampling requirements. ## Can FS11301 Detect Every Gas Inside a Tank? No. This is extremely important. The standard FS11301 discussed here specifically monitors: O2 + EX / LEL + H2S + CO A tank or vessel may involve other gases or vapours that are not measured by these four channels. Therefore, never select the detector simply because it is called a “4 Gas Detector.” First identify the gases that need to be measured. If another specific gas is required, tell MTM Precision before ordering. ## Can FS11301 Identify Which Combustible Gas Is Present? The standard FS11301 provides an: EX / LEL measurement channel. The supplied manufacturer documentation does not establish that this channel identifies the specific combustible gas present. Therefore, the detector should not be described as an instrument that tells the operator exactly which combustible gas is present. If gas identification is required, that is a different measurement requirement. ## Is FS11301 Suitable for Storage Tanks? It can be evaluated when the required atmospheric monitoring corresponds to: O2 + LEL + H2S + CO and its specified measuring ranges meet the requirement. However, “storage tank” alone is not enough information to determine suitability. Tell MTM Precision: What was stored? What gases need to be measured? Is active sampling required? This gives us much better information for detector selection. ## Is FS11301 Suitable for Process Vessels? The same principle applies. A process vessel can involve different gas hazards depending on the process. If the required measurements correspond to: O2 + LEL + H2S + CO the FS11301 can be evaluated. Where active sampling is required, the Pump Suction version can be considered. ## Is FS11301 Suitable for Tank Cleaning Work? Do not select the detector solely based on the words “tank cleaning.” The gases requiring monitoring must first be identified. If the required gas channels correspond to the standard FS11301 configuration, it can be evaluated against the application. If another gas or vapour must be measured, a different instrument may be necessary. ## Is FS11301 Suitable Before Entering a Tank? The FS11301 provides measurements for: O2 + LEL + H2S + CO and the Pump version provides active gas sampling capability. However, the instrument itself does not decide whether a tank is safe to enter. Entry decisions may involve: - Hazard assessment - Required gases - Sampling locations - Sampling method - Applicable limits - Ventilation - Work procedures - Other hazards - Entry requirements Users must follow their applicable confined-space and workplace safety procedures. ## Can I Take One Reading and Enter the Tank? The supplied FS11301 documentation does not define a complete tank-entry or confined-space testing procedure. Therefore, we should not claim that one reading is sufficient. Testing frequency, sampling locations and monitoring requirements should follow the applicable workplace procedure. ## Does FS11301 Have STEL and TWA? Yes. The detector's alarm-setting menu includes: - Low Alarm - High Alarm - STEL - TWA - MAX These functions provide additional professional monitoring capability beyond basic instantaneous readings. The appropriate STEL and TWA values should follow the applicable workplace requirements. ## Multiple Alarm Indications The FS11301 provides several warning methods: - Audible Alarm - LED Warning - Vibration - Backlight - LCD Alarm Information When an alarm condition occurs, the detector can activate: Buzzer + Flashing Red Indicator + Backlight + Vibration This gives the operator multiple indications of an abnormal reading. ## Does FS11301 Store Alarm Records? Yes. The detector provides a: Gas Alarm Record function. Users can select a gas channel and view the corresponding record through the detector interface. This provides additional information beyond the current concentration. ## Does FS11301 Have a Curve Graph? Yes. The FS11301 includes a: Curve Graph function. Users can browse changes in measured parameters through the instrument interface. Together with alarm records, this helps position the FS11301 as a more professional four-gas detector. ## What Is the Response Time? Fosensor specifies a general: Response Time: T < 15 seconds The manufacturer also specifies: Display Error: ≤ ±2% FS The listed working principles are: Electrochemical and Catalytic Combustion The documentation provides a general response-time specification rather than separate T90 values for each gas sensor. ## Battery Capacity The FS11301 uses a: 3000mAh Lithium Battery Manufacturer specifications include: Standby Time: >8 hours Charging Time: approximately 4 hours Working Voltage: DC 5V Charging uses a Type-C connection. ## Working Environment Fosensor specifies: Working Temperature: -20°C to 50°C Working Humidity: 0–95% RH, non-condensing Users should confirm that these specifications are appropriate for their intended working environment. ## Important Charging Safety Warning Fosensor warns against charging the detector at the testing site where sparks caused by plugging or unplugging the charger could create a fire or explosion risk. The manufacturer also states: The battery pack must not be charged in an explosive gas atmosphere. This warning is especially important for industrial gas-detection users. ## Does FS11301 Require Calibration? Yes. Fosensor states that the detector should be periodically calibrated. The manufacturer specifies: Calibration Cycle Should Not Exceed One Year Calibration-related functions include: - Zero-point calibration - Zero-point shift - Concentration calibration - One-click zeroing - Factory reset Fosensor warns that calibration operations should be carried out by professionals because incorrect calibration can affect measurement results. ## FS11301 Pump vs Natural Diffusion – Quick Comparison | Feature | FS11301 Natural Diffusion | FS11301 Pump Suction | |---|---|---| | Standard gases | LEL + H2S + CO + O2 | LEL + H2S + CO + O2 | | Sampling | Natural Diffusion | Active Pump Suction | | Size | 135 × 68 × 43 mm | 150 × 68 × 60 mm | | STEL / TWA | Yes | Yes | | Alarm records | Yes | Yes | | Curve graph | Yes | Yes | | Active sampling | No | Yes | | Can convert to diffusion | — | Yes | The main buying difference is therefore: Sampling Method ## Fosensor FS11301 vs Wintact WT8812 MTM Precision offers different levels of portable four-gas detector. ### Wintact WT8812 Economical 4-in-1 Gas Detector Best considered when price and value for money are the main priorities and the instrument meets the required application. ### Fosensor FS11301 Natural Diffusion Professional 4-in-1 Gas Detector For users requiring additional professional monitoring functions without active pump sampling. ### Fosensor FS11301 Pump Suction Professional 4-in-1 Gas Detector + Active Sampling For users whose testing procedure requires active gas sampling. The product ladder is: Economical → Wintact WT8812 Professional → Fosensor FS11301 Natural Diffusion Professional + Pump → Fosensor FS11301 Pump Suction ## Which FS11301 Should I Buy for Tank Testing? Choose based on the sampling requirement. If you require professional four-gas monitoring but do not require active sampling: Consider FS11301 Natural Diffusion. If your testing procedure requires active sampling: Consider FS11301 Pump Suction. If you are unsure, do not choose based only on price. Tell MTM Precision what you are testing and how the gas sample needs to be taken. ## What Information Should You Send for a Quotation? For faster recommendation and quotation, send us: 1. Gas type required 2. Tank / vessel application 3. Required measuring range 4. Natural Diffusion or Pump Suction 5. Quantity 6. Required certification or documentation 7. Calibration requirement For example: “Need 4 gas detector for tank inspection, O2 + LEL + H2S + CO, pump sampling required, quantity 5 units.” This allows us to recommend and quote much more accurately. ## FAQ – Tank & Vessel 4 Gas Detector Malaysia ### What four gases does FS11301 detect? The standard configuration covered here measures O2, EX/LEL, H2S and CO. ### Does FS11301 have a pump? There are two versions: Natural Diffusion and Pump Suction. ### Why choose the Pump version? Choose Pump Suction when active gas sampling is required. ### Is the Pump version more accurate? The supplied Fosensor documentation does not state that the Pump model is inherently more accurate. Its key additional function is active sampling. ### Can the Pump version become Natural Diffusion? Yes. The pump module can be removed and replaced with the Natural Diffusion front cover according to the manufacturer's instructions. ### Can FS11301 detect every gas inside a tank? No. The standard configuration specifically monitors O2, EX/LEL, H2S and CO. ### Does FS11301 have STEL and TWA? Yes. Both functions are available in the alarm-setting menu. ### Does it store alarm records? Yes. ### Does it have a curve graph? Yes. ### Does FS11301 require calibration? Yes. Fosensor states that the calibration cycle should not exceed one year. ## Buy Tank & Vessel 4 Gas Detector in Malaysia For tank, vessel or industrial atmospheric monitoring requiring: O2 + LEL + H2S + CO consider the: Fosensor FS11301 Portable 4-in-1 Gas Detector Choose: FS11301 Natural Diffusion for professional monitoring without active sampling. Choose: FS11301 Pump Suction when active gas sampling is required. For customers looking for a more economical four-gas detector: Wintact WT8812 For faster quotation, send MTM Precision: Gas Type + Tank/Vessel Application + Sampling Method + Quantity We can help you determine whether Natural Diffusion or Pump Suction is the more appropriate option. ## Contact MTM Precision MTM Precision Sdn Bhd No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia. Website: www.mtmpre.com.my WhatsApp: +6016-660 7346 Email: mtmpre@yahoo.com

25 Aug 2026