4 Gas Detector with STEL & TWA Malaysia Fosensor FS11301

# 4 Gas Detector with STEL & TWA Malaysia – Fosensor FS11301 Looking for a professional 4 Gas Detector with STEL and TWA functions in Malaysia? The Fosensor FS11301 Portable 4-in-1 Gas Detector provides simultaneous monitoring of: EX / LEL + H2S + CO + O2 and its alarm-setting functions include: Low Alarm High Alarm STEL TWA MAX The detector also provides: Gas Alarm Record and Curve Graph These additional functions make the FS11301 worth considering for professional industrial, EHS, HSE, Safety and maintenance applications where more than a basic instantaneous gas reading is required. The FS11301 is available in two configurations: FS11301 Natural Diffusion and FS11301 Pump Suction ## What Gases Does Fosensor FS11301 Measure? The standard FS11301 configuration covered here simultaneously monitors: - EX / LEL – Combustible Gas - H2S – Hydrogen Sulphide - CO – Carbon Monoxide - O2 – Oxygen The specified measuring ranges are: | Gas | Measuring Range | Resolution | |---|---:|---:| | EX / LEL | 0–100% LEL | 1% LEL | | H2S | 0–100 ppm | 1 ppm | | CO | 0–1000 ppm | 1 ppm | | O2 | 0–30% VOL | 0.1% VOL | Before selecting the FS11301, confirm that these gas channels and measuring ranges match the actual monitoring requirement. ## What Is STEL on a Gas Detector? STEL is one of the monitoring parameters available in the FS11301 alarm-setting menu. For buyers comparing portable gas detectors, the important product point is: FS11301 provides STEL functionality. The appropriate STEL values and their interpretation should follow the applicable workplace requirements. Do not simply copy a value from another workplace or application without confirming the applicable requirement. ## Does Fosensor FS11301 Have STEL? Yes. The FS11301 alarm-setting interface includes: STEL together with: Low Alarm High Alarm TWA MAX This provides additional monitoring capability beyond only displaying the current gas concentration. ## What Is TWA on a Gas Detector? TWA is another monitoring parameter available on the FS11301. For equipment selection, buyers can therefore distinguish between: A basic detector primarily focused on instantaneous readings and alarms and A detector that additionally provides STEL and TWA functions. The FS11301 belongs to the second category. ## Does Fosensor FS11301 Have TWA? Yes. TWA is included in the FS11301 alarm-setting menu. The detector therefore provides: Low Alarm + High Alarm + STEL + TWA + MAX This combination is one of the key professional features of the FS11301. ## STEL vs TWA – Are They the Same? No. The FS11301 lists STEL and TWA as separate functions. Therefore, they should not be treated as interchangeable settings. For the purposes of operating the detector, users should follow the applicable workplace requirements for the appropriate values and interpretation. ## Does Every 4 Gas Detector Have STEL and TWA? Do not assume so. The words: “4 Gas Detector” mainly describe the number of gas channels. They do not automatically tell you which additional monitoring functions the detector provides. When comparing models, ask separately: Does it have STEL? Does it have TWA? Does it have MAX? Does it store alarm records? Does it provide a curve graph? This gives a much better comparison than simply counting the number of sensors. ## Why Are STEL and TWA Important When Comparing Gas Detectors? For purchasing purposes, STEL and TWA help distinguish different levels of instrument functionality. A customer may only need a straightforward four-gas detector. Another customer may specifically request a professional detector with additional monitoring functions. Therefore, MTM Precision can position the choices according to requirement rather than simply saying: “Both are four-gas detectors.” ## What Is MAX on the FS11301? MAX is also included in the FS11301 alarm-setting menu. Together, the detector provides: Low Alarm High Alarm STEL TWA MAX This gives users several monitoring and alarm-related functions within one portable instrument. ## Does FS11301 Keep Alarm Records? Yes. The FS11301 provides a: Gas Alarm Record function. The operating instructions allow the user to select the gas type and view the corresponding alarm record. This provides additional information after an alarm event rather than only showing the current concentration. ## Why Is Gas Alarm Record Useful? Consider two detector levels. ### Basic Approach The operator sees a gas alarm when it occurs. ### FS11301 The detector additionally provides a Gas Alarm Record function. For professional users, this gives another way to review alarm information through the detector interface. It should not, however, be represented as a complete external data-logging or compliance-reporting system unless such capability is specifically documented. ## Does FS11301 Have a Curve Graph? Yes. The detector provides a: Curve Graph function. The user can select the gas type and browse changes in the measured parameter through the instrument interface. This is another professional feature of the FS11301. ## Is Curve Graph the Same as Data Logging? The supplied Fosensor documentation confirms a Curve Graph function. It does not provide enough information to make every possible claim associated with a full external data-logging system. Therefore, the safer and more accurate description is: FS11301 provides an on-instrument Curve Graph for browsing changes in measured parameters. Do not automatically describe it as a PC data logger or cloud monitoring system unless separate documentation confirms those capabilities. ## What Alarm Methods Does FS11301 Provide? The detector provides multiple alarm indications: - Audible Alarm - LED Warning - Vibration - Backlight - LCD Alarm Information When an alarm condition occurs, the detector can activate: Buzzer + Flashing Red Indicator + Backlight + Vibration This gives the operator multiple ways to notice an alarm condition. ## Can the Audible Alarm Be Silenced? Yes. According to Fosensor's operating instructions, the audible alarm can be silenced by pressing the middle key. However: Vibration + Backlight + Displayed Alarm Information remain active. Silencing the buzzer does not change the measured gas concentration. ## What Are the Manufacturer-Listed Alarm Points? Fosensor lists: ### EX / LEL Low Alarm: 20% LEL High Alarm: 50% LEL ### H2S Low Alarm: 10 ppm High Alarm: 35 ppm ### CO Low Alarm: 50 ppm High Alarm: 150 ppm ### O2 Low Alarm: 19.5% VOL High Alarm: 23.5% VOL These are manufacturer-listed alarm values. Applicable workplace requirements should determine how alarm settings are configured and interpreted. ## Are STEL and TWA the Same as Low and High Alarm? No. The FS11301 lists them separately. Its alarm-setting menu contains: Low Alarm High Alarm STEL TWA MAX Therefore, buyers should not assume that having a High Alarm automatically means the detector has STEL or TWA functionality. Check the actual specification. ## Can I Change STEL and TWA Settings? The FS11301 provides these parameters within its alarm-setting interface. However, the values used in practice should follow the applicable workplace requirements. Do not change safety-related settings simply to prevent the detector from alarming. ## Is STEL/TWA the Same as Calibration? No. This distinction is important. STEL and TWA are monitoring/alarm-related functions. Calibration relates to the detector's measurement response. Changing STEL or TWA does not calibrate the gas sensor. Likewise, calibrating the detector does not automatically establish the correct STEL or TWA requirements for a workplace. ## Does FS11301 Require Calibration? Yes. Fosensor states that the detector should be periodically calibrated. The manufacturer specifies: Calibration Cycle Should Not Exceed One Year The detector provides calibration-related functions including: - Zero-point calibration - Zero-point shift - Concentration calibration - One-click zeroing - Factory reset Fosensor warns that calibration operations are for professionals because incorrect calibration can affect measurement results. ## Natural Diffusion or Pump Suction – Do Both Have Professional Functions? The FS11301 is available as: Natural Diffusion and Pump Suction The main distinction between the two configurations is the sampling method. ### Natural Diffusion The surrounding atmosphere reaches the detector naturally. ### Pump Suction The detector actively draws a gas sample. When choosing between them, the key question remains: Is active sampling required? ## Does Pump Suction Improve STEL or TWA? The supplied Fosensor documentation does not state that the Pump version provides “better STEL” or “better TWA.” Pump Suction relates to: Sampling Method STEL and TWA relate to: Monitoring Functions These should be treated as different product considerations. ## Is Pump Suction More Accurate? The supplied documentation does not state that the Pump Suction version is inherently more accurate than Natural Diffusion. Its major additional capability is: Active Gas Sampling Therefore, do not choose Pump solely because someone says it is “more accurate.” Choose it when the sampling requirement justifies it. ## Can the FS11301 Pump Convert to Natural Diffusion? Yes. According to Fosensor's operating instructions, the Pump Suction module can be removed and replaced with the Natural Diffusion front cover. The basic procedure is: 1. Remove the four rear screws. 2. Remove the Pump Suction module. 3. Install the Natural Diffusion front cover. 4. Tighten the screws. The detector can then operate in Natural Diffusion mode. This provides additional flexibility for professional users. ## Who Should Consider a 4 Gas Detector with STEL and TWA? The FS11301 can be considered by users whose requirements include its four standard gas channels and professional monitoring functions. Potential users may include: - EHS Teams - HSE Teams - Safety Officers - Factory Safety Teams - Maintenance Teams - Plant Engineering Teams - Industrial Contractors However, job title alone should not determine the detector. The actual gases and monitoring requirements must still be confirmed. ## Is FS11301 Suitable for Confined Space Monitoring? The standard FS11301 provides: O2 + LEL + H2S + CO monitoring. It also provides: STEL + TWA + MAX and is available with: Pump Suction where active sampling is required. These functions can make it relevant when evaluating equipment for atmospheric monitoring where those capabilities are required. However, the detector itself does not determine whether a confined space is safe for entry. Applicable risk assessment, sampling, monitoring and entry procedures must still be followed. ## Is FS11301 Suitable for Factory Safety? It can be considered where the identified monitoring requirement includes: LEL + H2S + CO + O2 and where its measuring ranges and monitoring functions meet the requirement. For professional factory safety users, the availability of: STEL TWA Alarm Records Curve Graph Multiple Alarm Indications can form part of the comparison with other detector models. ## Can FS11301 Detect Every Toxic Gas? No. The standard FS11301 configuration discussed here monitors: EX / LEL + H2S + CO + O2 It should not be treated as a universal toxic-gas detector. If another specific gas needs to be measured, tell MTM Precision the gas name before purchasing. ## Does FS11301 Measure CO2? The standard configuration includes: CO – Carbon Monoxide not: CO2 – Carbon Dioxide If CO2 monitoring is required, a suitable CO2 instrument should be selected. ## Does FS11301 Measure VOC? A dedicated VOC channel is not specified in the supplied FS11301 documentation. Therefore, the standard FS11301 should not be advertised as a VOC detector. ## What Is the FS11301 Response Time? Fosensor specifies a general: Response Time: T < 15 seconds The manufacturer also specifies: Display Error: ≤ ±2% FS The listed working principles are: Electrochemical and Catalytic Combustion The supplied performance table provides a general response-time specification rather than individual response-time figures for every gas channel. ## Battery Specifications The FS11301 uses a: 3000mAh Lithium Battery Fosensor specifies: Standby Time: >8 hours Charging Time: approximately 4 hours Working Voltage: DC 5V Charging uses a Type-C connection. ## Important Charging Precaution Fosensor warns users not to charge the detector at the testing site where sparks caused by plugging or unplugging the charger could create a fire or explosion risk. The manufacturer also states: The battery pack must not be charged in an explosive gas atmosphere. Users should follow the manufacturer's operating precautions. ## FS11301 vs Economical 4 Gas Detector Not every customer needs the same level of instrument. MTM Precision can position the range as follows: ### Wintact WT8812 Economical 4-in-1 Gas Detector For customers prioritising value for money where the detector meets the required application. ### Fosensor FS11301 Natural Diffusion Professional 4-in-1 Gas Detector For users requiring professional monitoring functions such as: STEL TWA MAX Gas Alarm Record Curve Graph without active sampling. ### Fosensor FS11301 Pump Suction Professional 4-in-1 Gas Detector + Active Sampling For users requiring the professional FS11301 platform plus active gas sampling. ## When Is It Worth Upgrading to FS11301? Consider moving to FS11301 when the requirement goes beyond simply: “I need a cheap four-gas detector.” For example, when the customer specifically asks for: STEL TWA Alarm History Gas Curve Professional Monitoring Functions or Pump Suction the FS11301 becomes a stronger option. This gives customers a reason to upgrade based on functionality rather than brand name alone. ## Quick Comparison | Requirement | Suggested Direction | |---|---| | Economical 4-gas detector | Wintact WT8812 | | Professional 4-gas detector | FS11301 Natural Diffusion | | STEL / TWA required | Consider FS11301 | | Alarm Record required | Consider FS11301 | | Curve Graph required | Consider FS11301 | | Active sampling required | FS11301 Pump Suction | | CO2 required | Select suitable CO2 detector | | VOC required | Select suitable VOC detector | ## FAQ – 4 Gas Detector with STEL & TWA ### Does Fosensor FS11301 have STEL? Yes. STEL is included in its alarm-setting menu. ### Does FS11301 have TWA? Yes. ### Does it have MAX? Yes. MAX is also listed in the alarm-setting menu. ### Are STEL and TWA the same? No. They are listed as separate functions. ### Does every four-gas detector have STEL and TWA? Do not assume so. Check the actual detector specification. ### Does FS11301 store alarm records? Yes. It provides a Gas Alarm Record function. ### Does FS11301 show a gas curve? Yes. It provides a Curve Graph function. ### Is Curve Graph the same as a complete data-logging system? The supplied documentation confirms the Curve Graph function but does not support every possible claim associated with external data logging. ### Does FS11301 have Pump Suction? A Pump Suction configuration is available. ### Do I need Pump Suction to use STEL and TWA? Pump Suction and STEL/TWA serve different purposes. Pump relates to sampling, while STEL/TWA are monitoring functions. ### Does FS11301 require calibration? Yes. Fosensor states that the calibration cycle should not exceed one year. ## Buy 4 Gas Detector with STEL & TWA in Malaysia If you require professional simultaneous monitoring of: LEL + H2S + CO + O2 with additional functions including: STEL + TWA + MAX + Gas Alarm Record + Curve Graph consider: Fosensor FS11301 Portable 4-in-1 Gas Detector Choose: FS11301 Natural Diffusion when professional monitoring is required without active sampling. Choose: FS11301 Pump Suction when professional monitoring plus active gas sampling is required. For customers mainly looking for an economical four-gas solution, ask MTM Precision about: Wintact WT8812 For faster quotation, send: Gas Type + Application + Natural Diffusion/Pump + Quantity ## Contact MTM Precision MTM Precision Sdn Bhd No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia. Website: www.mtmpre.com.my WhatsApp: +6016-660 7346 Email: mtmpre@yahoo.com

25 Aug 2026