4 Gas Detector with Alarm Record & Curve Graph Malaysia Fosensor FS11301

# 4 Gas Detector with Alarm Record & Curve Graph Malaysia – Fosensor FS11301 Looking for a professional 4 Gas Detector with alarm records and gas curve display in Malaysia? The Fosensor FS11301 Portable 4-in-1 Gas Detector provides simultaneous monitoring of: EX / LEL + H2S + CO + O2 In addition to displaying gas concentrations and providing multiple alarm indications, the FS11301 also includes: Gas Alarm Record and Curve Graph These functions are useful differentiators for buyers comparing a professional four-gas detector with a more basic portable model. The FS11301 is available in: FS11301 Natural Diffusion and FS11301 Pump Suction The Pump version adds active gas sampling capability. ## What Gases Does Fosensor FS11301 Monitor? The standard FS11301 configuration covered here monitors: - EX / LEL – Combustible Gas - H2S – Hydrogen Sulphide - CO – Carbon Monoxide - O2 – Oxygen The specified ranges are: | Gas | Measuring Range | Resolution | |---|---:|---:| | EX / LEL | 0–100% LEL | 1% LEL | | H2S | 0–100 ppm | 1 ppm | | CO | 0–1000 ppm | 1 ppm | | O2 | 0–30% VOL | 0.1% VOL | The detector should be selected only when these gas channels and measuring ranges correspond to the actual monitoring requirement. ## Does Fosensor FS11301 Store Gas Alarm Records? Yes. The FS11301 operating instructions include a: Gas Alarm Record function. The user can enter the menu, select the gas type and display the corresponding alarm record. This gives the user information beyond only the concentration currently shown on the main display. ## Why Is an Alarm Record Useful? Imagine a detector alarms while being used during industrial work. A very basic detector may mainly provide: Current Reading + Alarm The FS11301 additionally provides a Gas Alarm Record function. This allows the user to review alarm information through the detector interface. For Safety, EHS, HSE and maintenance users, this can be a useful additional instrument function. ## Can I Select Which Gas Alarm Record to View? Yes. The manufacturer's instructions describe selecting the gas type within the Gas Alarm Record interface. This is relevant because the FS11301 simultaneously monitors four different parameters: EX / LEL H2S CO O2 The user can therefore access the corresponding record according to the selected gas channel. ## Does FS11301 Have a Curve Graph? Yes. The FS11301 also includes a: Curve Graph function. The user can select the gas type and browse changes in the measured parameter through the instrument interface. This gives users another way to view measurement information beyond a single instantaneous number. ## What Does the Curve Graph Show? Based on Fosensor's operating instructions, the Curve Graph allows users to browse changes in the measured parameters. The supplied documentation supports describing this as an on-instrument curve or trend-browsing function. It should not automatically be described as a complete external data-logging system unless separate documentation confirms that capability. ## Alarm Record vs Curve Graph – What Is the Difference? They serve different purposes. ### Gas Alarm Record Allows the user to view corresponding gas alarm records. ### Curve Graph Allows the user to browse changes in measured parameters. Together, these functions provide more information than simply viewing the current concentration. ## Is Curve Graph the Same as Data Logging? Not necessarily. This distinction is important when specifying the detector. The supplied FS11301 documentation confirms: Curve Graph and Gas Alarm Record It does not, from the information available here, establish every capability normally associated with a full PC-based or cloud-based data-logging system. Therefore, if a customer specifically requires: Downloadable data PC software CSV export Cloud storage Remote monitoring or Formal electronic reports these requirements should be confirmed separately before ordering. Do not assume that “Curve Graph” automatically means all of these functions are available. ## Does FS11301 Have STEL and TWA? Yes. The alarm-setting menu includes: - Low Alarm - High Alarm - STEL - TWA - MAX This combination with: Gas Alarm Record + Curve Graph is one of the strongest ways to position the FS11301 as a professional four-gas detector. ## What Are the Manufacturer-Listed Alarm Points? Fosensor lists: ### EX / LEL Low Alarm: 20% LEL High Alarm: 50% LEL ### H2S Low Alarm: 10 ppm High Alarm: 35 ppm ### CO Low Alarm: 50 ppm High Alarm: 150 ppm ### O2 Low Alarm: 19.5% VOL High Alarm: 23.5% VOL These are manufacturer-listed alarm values. The applicable workplace requirements should determine how alarm settings are configured and interpreted. ## How Does FS11301 Warn the Operator? The FS11301 provides multiple alarm indications including: - Audible Alarm - LED Warning - Vibration - Backlight - LCD Alarm Information When an alarm condition occurs, the detector can activate: Buzzer + Flashing Red Indicator + Backlight + Vibration This gives the user several simultaneous indications of an alarm condition. ## Can I Silence the Audible Alarm? Yes. According to Fosensor's operating instructions, the audible alarm can be silenced by pressing the middle key. However: Vibration + Backlight + Displayed Alarm Information remain active. Silencing the buzzer does not change the measured gas concentration. ## Why Is This Better Than Looking Only at the Current Reading? A current reading answers: “What is the detector measuring now?” The FS11301's additional functions can provide other information: Gas Alarm Record → Alarm-related record information Curve Graph → Changes in measured parameters STEL / TWA / MAX → Additional monitoring functions This creates a more complete professional feature set. ## Who Should Consider These Functions? They may be particularly relevant when the buyer is looking for more than a basic portable gas detector. Examples include: - Safety Officers - EHS Teams - HSE Teams - Maintenance Teams - Plant Engineering Teams - Industrial Contractors - Factory Safety Teams However, the detector must still match the actual gas-monitoring requirement. Professional features do not compensate for selecting the wrong sensor channels. ## Natural Diffusion or Pump Suction? The FS11301 is available in two configurations. ### FS11301 Natural Diffusion The surrounding atmosphere reaches the detector naturally. Specified dimensions: 135 × 68 × 43 mm This version can be considered when professional monitoring functions are required without active sampling. ### FS11301 Pump Suction The detector actively draws a gas sample. Specified dimensions: 150 × 68 × 60 mm This version can be considered when professional monitoring functions plus active gas sampling are required. ## Do I Need the Pump to Get Alarm Records and Curve Graph? Pump Suction and the monitoring functions should be treated as separate product considerations. The key purpose of the Pump configuration is: Active Gas Sampling Therefore, the buying question should be: Do I need professional monitoring functions? and separately: Do I need active gas sampling? This gives a much clearer selection path. ## Is Pump Suction More Accurate? The supplied Fosensor documentation does not state that the Pump version is inherently more accurate than Natural Diffusion. The key additional capability is active sampling. Do not use “more accurate” as the reason to upgrade unless supported by a specific manufacturer specification. ## Can the Pump Version Convert to Natural Diffusion? Yes. According to Fosensor's operating instructions, the Pump Suction module can be removed and replaced with the Natural Diffusion front cover. The basic procedure is: 1. Remove the four rear screws. 2. Remove the Pump Suction module. 3. Install the Natural Diffusion front cover. 4. Tighten the screws. The detector can then operate in Natural Diffusion mode. This gives professional users additional sampling flexibility. ## Is FS11301 Suitable for Factory Safety? It can be considered where the required monitoring parameters include: LEL + H2S + CO + O2 and the detector's measuring ranges meet the requirement. For users who also value: STEL TWA MAX Alarm Records Curve Graph the FS11301 offers additional professional monitoring functions. ## Is FS11301 Suitable for Maintenance Teams? Yes, where its gas channels and ranges match the identified requirement. Maintenance teams can choose: Natural Diffusion when active sampling is not required. Pump Suction when active sampling is required. ## Is FS11301 Suitable for Confined Space Atmospheric Monitoring? The FS11301 provides simultaneous: O2 + LEL + H2S + CO monitoring. A Pump Suction configuration is available where active sampling is required. However, the detector itself does not determine whether a confined space is safe for entry. Applicable risk assessment, testing, sampling, monitoring and entry procedures must still be followed. ## Can FS11301 Detect Every Gas? No. The standard configuration covered here specifically monitors: EX / LEL + H2S + CO + O2 Do not assume that a professional four-gas detector can detect every industrial gas. If another gas needs to be measured, specify the exact gas before purchasing. ## Does FS11301 Measure CO2? The standard configuration includes: CO – Carbon Monoxide not: CO2 – Carbon Dioxide If CO2 monitoring is required, select an appropriate CO2 instrument. ## Does FS11301 Detect VOC? A dedicated VOC channel is not specified in the supplied FS11301 documentation. If VOC is the required parameter, select a detector designed for VOC measurement. ## What Is the Response Time? Fosensor specifies a general: Response Time: T < 15 seconds The manufacturer also specifies: Display Error: ≤ ±2% FS The listed working principles are: Electrochemical and Catalytic Combustion The documentation provides a general response-time specification rather than separate response-time values for every gas channel. ## Battery Specifications The FS11301 uses a: 3000mAh Lithium Battery Fosensor specifies: Standby Time: >8 hours Charging Time: approximately 4 hours Working Voltage: DC 5V Charging uses a Type-C connection. ## Does FS11301 Require Calibration? Yes. Fosensor states that periodic calibration is required. The manufacturer specifies: Calibration Cycle Should Not Exceed One Year Calibration-related functions include: - Zero-point calibration - Zero-point shift - Concentration calibration - One-click zeroing - Factory reset Fosensor warns that calibration operations are for professionals because incorrect calibration can affect measurement results. ## Alarm History Does Not Replace Calibration This is important. Gas Alarm Record tells you about recorded alarm information. Curve Graph lets you browse measurement changes. Neither function means the detector no longer requires calibration. These are different aspects of instrument management. ## FS11301 vs Basic 4 Gas Detector When comparing detectors, do not only ask: “How many gases?” A better comparison is: ### Basic Requirement LEL + H2S + CO + O2 monitoring ### Professional Requirement LEL + H2S + CO + O2 plus: STEL TWA MAX Gas Alarm Record Curve Graph ### Professional + Sampling Requirement All of the above plus: Active Pump Suction This creates a much clearer buying path. ## Fosensor FS11301 vs Wintact WT8812 MTM Precision offers different product levels. ### Wintact WT8812 Economical 4-in-1 Gas Detector For customers prioritising value for money where the model meets the required application. ### Fosensor FS11301 Natural Diffusion Professional 4-in-1 Gas Detector For customers requiring additional professional monitoring functions without active sampling. ### Fosensor FS11301 Pump Suction Professional 4-in-1 Gas Detector + Active Sampling For customers requiring professional monitoring plus active sampling. The product ladder is: Economical → Wintact WT8812 Professional → Fosensor FS11301 Natural Diffusion Professional + Active Sampling → Fosensor FS11301 Pump Suction ## When Should I Upgrade to FS11301? FS11301 becomes especially worth considering when the buyer asks for features such as: STEL TWA MAX Alarm Record Gas Curve or Pump Suction Instead of selling the customer “a more expensive gas detector,” the better approach is to identify which additional function they actually require. ## 4 Gas Detector Feature Checklist Before requesting a quotation, ask: 1. Which gases need to be measured? 2. What measuring ranges are required? 3. Are STEL and TWA required? 4. Is MAX required? 5. Is an alarm record required? 6. Is a curve graph required? 7. Is active sampling required? 8. What calibration requirement applies? 9. What documentation is required? 10. How many units are required? This makes it easier to compare detectors on actual capability. ## FAQ – Gas Detector Alarm Record & Curve Graph ### Does Fosensor FS11301 store gas alarm records? Yes. It provides a Gas Alarm Record function. ### Can I choose which gas record to view? The operating instructions describe selecting the gas type to display the corresponding record. ### Does FS11301 have a gas curve graph? Yes. ### Does Curve Graph mean it has PC data logging? The supplied documentation confirms an on-instrument Curve Graph but does not establish every external data-logging capability. Confirm separately if PC export or downloadable records are required. ### Does FS11301 have STEL? Yes. ### Does it have TWA? Yes. ### Does it have MAX? Yes. ### Does it have a vibration alarm? Yes. ### Is there a Pump version? Yes. ### Is Pump Suction required for the Alarm Record function? Pump Suction relates to active sampling. Alarm Record is a monitoring function. ### Does FS11301 require calibration? Yes. Fosensor states that the calibration cycle should not exceed one year. ## Buy Professional 4 Gas Detector in Malaysia If your requirement goes beyond a basic four-gas detector and you need: LEL + H2S + CO + O2 with professional functions including: STEL TWA MAX Gas Alarm Record Curve Graph consider: Fosensor FS11301 Portable 4-in-1 Gas Detector Choose: FS11301 Natural Diffusion for professional monitoring without active sampling. Choose: FS11301 Pump Suction when active gas sampling is also required. For customers mainly looking for an economical four-gas solution: Wintact WT8812 For faster model selection and quotation, send MTM Precision: Gas Type + Application + Required Functions + Pump/Non-Pump + Quantity ## Contact MTM Precision MTM Precision Sdn Bhd No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia. Website: www.mtmpre.com.my WhatsApp: +6016-660 7346 Email: mtmpre@yahoo.com

25 Aug 2026