FUZRR FR205B vs FR205D Clamp Meter Comparison Malaysia
FUZRR FR205B vs FR205D Clamp Meter Comparison Malaysia
The FUZRR FR205B and FUZRR FR205D are compact True RMS digital clamp multimeters for electrical testing and maintenance.
Although both models look similar and share several common functions, the FR205D offers a higher measurement range and one major advantage: DC current measurement.
The FR205B is suitable for general AC electrical work, while the FR205D provides wider application coverage for electricians, automotive technicians, solar installers and industrial maintenance teams in Malaysia.
Quick Comparison
FeatureFUZRR FR205BFUZRR FR205DMaximum display4000 counts6000 countsDC voltageUp to 400VUp to 600VAC voltageUp to 400VUp to 600VAC currentUp to 400AUp to 600ADC currentNot availableUp to 600AResistanceUp to 40MΩUp to 60MΩCapacitanceUp to 40mFUp to 100mFFrequencyUp to 10MHzUp to 10MHzDuty cycle0.1%–99.9%0.1%–99.9%Temperature-20°C to 1000°C-20°C to 1000°CTrue RMSYesYesAutomatic rangingYesYesNCV detectionYesYesJaw dimensions28 × 42mm28 × 42mm
Main Difference: DC Current Measurement
The most important difference is that the FR205D measures both AC and DC current, while the FR205B measures AC current only.
This difference determines which applications each model can cover.
The FR205B can measure current in:
Building AC wiring
Distribution boards
Conventional AC motors
Pumps and fans
Household appliances
General AC machinery
The FR205D can cover all these applications plus:
Automotive battery systems
Alternator charging current
Solar PV DC circuits
Battery charging and discharging
DC motors
DC power systems
Telecommunications backup systems
Battery-powered machinery
If DC current measurement is required, choose the FR205D.
Measurement Range
The FR205D has a higher current and voltage range.
FUZRR FR205B
AC current: up to 400A
AC voltage: up to 400V
DC voltage: up to 400V
DC current: not available
FUZRR FR205D
AC current: up to 600A
DC current: up to 600A
AC voltage: up to 600V
DC voltage: up to 600V
For general low-voltage AC maintenance where current remains below 400A, the FR205B may be sufficient.
For wider measurement coverage and mixed AC/DC work, the FR205D is the better choice.
4000 Counts vs 6000 Counts
The FR205B has a 4000-count display, while the FR205D has a 6000-count display.
Display count determines the highest value the meter can show before changing to another range.
A higher count can provide:
Better display resolution
More detailed readings
Fewer automatic range changes
Easier observation of smaller changes
However, display count is not the same as accuracy. Accuracy must be evaluated separately according to the published specification.
For everyday electrical troubleshooting, both displays are practical. The FR205D provides the advantage when greater resolution and a wider range are preferred.
AC Current Applications
Both models can measure AC current without disconnecting the conductor.
Common AC applications include:
Electrical distribution boards
Motor current inspection
Pump maintenance
Fan and blower testing
HVAC troubleshooting
Building maintenance
Appliance servicing
Factory machinery inspection
To measure current correctly, place only one conductor inside the clamp. If live and neutral conductors are clamped together, their magnetic fields may cancel and produce a near-zero reading.
Automotive Applications
The FR205D is the suitable choice for automotive current testing because vehicle electrical systems operate primarily on DC.
Possible FR205D automotive applications include:
Alternator charging-current checks
Battery charging-current measurement
Battery discharge observation
Starter-circuit inspection
Cooling-fan current measurement
DC motor testing
Electrical accessory load checks
The FR205B can measure automotive DC voltage, but it cannot measure the vehicle’s DC current through the clamp.
Solar PV Applications
A solar PV system contains both DC and AC circuits.
The FR205D can assist with:
Solar-string DC current measurement
Battery charging-current checks
Battery discharge-current checks
Charge-controller inspection
Inverter DC input-current checks
Inverter AC output-current checks
The FR205B can measure inverter AC current, but it cannot measure current on the solar or battery DC side.
Both models have voltage limits. Users must confirm the maximum possible PV string voltage before connecting either instrument.
True RMS Measurement
Both the FR205B and FR205D provide True RMS measurement.
True RMS is useful when measuring distorted AC waveforms produced by equipment such as:
Variable-frequency drives
Inverter air conditioners
Solar inverters
LED drivers
Switching power supplies
Electronic motor controllers
Industrial automation equipment
A True RMS instrument generally provides more dependable AC measurements on non-linear loads than an average-responding meter.
Resistance and Capacitance
The FR205D also provides wider resistance and capacitance ranges.
FunctionFR205BFR205DResistanceUp to 40MΩUp to 60MΩCapacitanceUp to 40mFUp to 100mF
These functions can support general component checks and troubleshooting.
Capacitors must be safely discharged and isolated from the circuit before measurement. An in-circuit measurement may be affected by other connected components.
Temperature Measurement
Both models support temperature measurement from approximately -20°C to 1000°C, subject to the supplied or compatible temperature probe.
Possible applications include:
HVAC inspection
Motor-temperature checks
Electrical-panel inspection
Machinery maintenance
Heating-system troubleshooting
Contact temperature readings do not replace thermal imaging when a complete temperature pattern or remote inspection is required.
Functions Shared by Both Models
Both the FR205B and FR205D provide:
True RMS measurement
Automatic range selection
Frequency measurement
Duty-cycle measurement
Resistance measurement
Capacitance measurement
Temperature measurement
Diode testing
Continuity testing
NCV non-contact voltage detection
Live-wire identification
Data hold
Maximum and minimum recording
Backlit LCD display
Automatic shutdown
Low-battery indication
The selection therefore depends mainly on current type, required range and display resolution.
Choose the FR205B If:
The FUZRR FR205B may be sufficient when:
You measure AC current only
The expected current is below 400A
The voltage is within the 400V range
You perform basic building or appliance maintenance
You do not work with automotive, battery or solar DC current
A more economical model is preferred
Choose the FR205D If:
The FUZRR FR205D is the better choice when:
You need both AC and DC current measurement
The expected current may reach 600A
You need voltage measurement up to 600V
You work with vehicles or battery systems
You test solar PV equipment
You maintain DC motors or power systems
You prefer a 6000-count display
You want a wider resistance and capacitance range
For MTM Precision’s industrial product positioning, the FR205D is the stronger and easier model to promote because it covers more customer applications.
Can Either Model Replace Every Electrical Tester?
No. These are general-purpose clamp multimeters.
Depending on the application, technicians may still require:
Insulation-resistance tester
Earth-resistance tester
Leakage-current clamp meter
Power-quality analyser
Phase-sequence meter
Solar PV tester
Thermal camera
Battery tester
Low-current DC clamp meter
Select the instrument according to the measurement range, required accuracy, safety category and application.
FUZRR FR205B or FR205D: Which Is Better?
For simple AC electrical testing, the FR205B offers the essential functions.
For a small difference in equipment category, the FR205D provides substantially wider application coverage through:
AC and DC current measurement
Higher 600A current range
Higher 600V voltage range
6000-count display
Wider resistance range
Wider capacitance range
For electricians who occasionally handle solar, automotive or battery systems, the FR205D is generally the more practical long-term choice.
Buy FUZRR FR205B or FR205D in Malaysia
Contact MTM Precision for the FUZRR FR205B and FR205D Clamp Meter in Malaysia.
Tell us whether you need to test building wiring, motors, HVAC systems, automotive batteries, solar PV systems or industrial machinery. We can help select the appropriate model based on your application and measurement range.
MTM Precision Sdn. Bhd. (744811-A)
Telephone: +603-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com / enquiry@mtmpre.com.my
Website: www.mtmpre.com.my
Showroom & Service Centre:
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
19 Sep 2026
