Portable Flood Barrier for House Gate and Door Entrance Malaysia

Floodwater can enter a house through the front gate, car porch, kitchen door, sliding door or floor drain. A **portable modular ABS flood barrier** can provide temporary protection when installed before water reaches the property.


The system is reusable and does not require residents to fill and stack multiple sandbags. However, homeowners should assess the complete water-entry route rather than protecting only one doorway.


Quick Product Summary


• ABS construction 

• Approximate size: 70.5 × 68 × 52 cm 

• Approximate weight: 2.8 kg per panel 

• L-shaped self-supporting design 

• Modular interlocking connection 

• Sealing and anti-slip strips 

• Reusable after cleaning 

• Ready stock in Malaysia 


Where Can It Be Used Around a House?


The modular barrier may be considered for:


• Front gates 

• Car porch entrances 

• Main doors 

• Sliding-door areas 

• Kitchen and rear entrances 

• Ground-floor storerooms 

• Garden access points 

• Low wall openings 


Before ordering, inspect whether water may enter from drains, side paths or neighbouring properties.


Protecting the Gate or the Door


Installing the barrier at the outer gate may help keep water away from the entire car porch, but this normally requires more panels and exposes the system to road runoff.


Installing it directly in front of the door requires fewer panels, but water may still accumulate inside the porch and enter through another opening.


| Installation Location | Main Consideration |

|---|---|

| Front gate | Wider coverage and exposure to road water |

| Car porch | Ground slope and vehicle access |

| Main door | Narrower opening but limited protection area |

| Rear door | Hidden drainage and side-path runoff |

| Sliding door | Long opening and uneven tracks |


The correct location depends on the house layout and expected direction of incoming water.


How Many Panels May Be Required?


| Approximate Opening Width | Initial Quantity Estimate |

|---|---:|

| 1 metre | 2 panels |

| 2 metres | 3–4 panels |

| 3 metres | 5 panels |

| 4 metres | 6–7 panels |

| 5 metres | 8 panels |


Connection overlap and additional side coverage must be considered. Measure the entire path through which water can enter, not only the door panel itself.


Residential Installation Steps


1. Remove shoes, stones and other objects from the floor.

2. Position the wide base toward the incoming water.

3. Connect each panel fully.

4. Check the locking points and sealing strips.

5. Extend the barrier beyond both sides of the opening where possible.

6. Inspect nearby drains and wall gaps.

7. Maintain a safe alternative exit for occupants.


Carry out a practice installation before the rainy season so that family members know how to deploy the system quickly.


What Else Should Homeowners Prepare?


A flood barrier should be part of a wider household plan.


Consider preparing:


• A suitable drainage pump 

• Wet-and-dry vacuum equipment 

• Floor squeegees 

• Waterproof storage boxes 

• Raised storage for electrical items 

• Emergency lighting 

• An evacuation plan 

• Contact numbers for family members and local authorities 


Move vehicles and valuable items early when a flood warning is issued.


Important Safety Considerations


Never install the barrier in a way that traps occupants or blocks the only emergency exit.


Do not enter fast-moving floodwater to deploy, adjust or remove the panels. Floodwater may hide open drains, electrical hazards, sharp objects and unstable ground.


The panel is approximately **52 cm high**, but this is not a guaranteed safe water-retention depth. Actual performance depends on water depth, speed, debris, ground condition and installation quality.


Frequently Asked Questions


Can I install it at an autogate?


It may be positioned near a gate if the ground and available space are suitable. Ensure that the panel does not interfere with the gate mechanism or safety sensors.


Can a car drive over the barrier?


No. Remove the panels before allowing a vehicle to cross the protected entrance.


Does it require drilling?


The temporary L-shaped design is intended for placement without permanent floor installation. Suitability still depends on the site.


Will it work on a sloping car porch?


A sloping surface may increase water speed and make sealing more difficult. A trial installation and careful assessment are necessary.


Can I leave it outside permanently?


It is better treated as temporary emergency equipment. Clean, dry and store it properly after use.


Does It Replace Permanent Flood Protection?


No. A portable barrier may help reduce water entry during suitable conditions, but homes with repeated or severe flooding may require improved drainage, raised thresholds, non-return valves or professional flood-mitigation work.


Ready Stock in Malaysia


MTM Precision supplies portable ABS flood barrier panels for residential, retail and commercial use.


Send us your **gate or doorway width, site photographs and previous flood level by WhatsApp**. We can help estimate the number of panels required for your property.


**MTM Precision Sdn Bhd** 

**Showroom & Service Centre:** No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia 

**Tel:** 03-8080 7172 

**WhatsApp:** +6016-660 7346 

**Email:** mtmpre@yahoo.com 

**Website:** www.mtmpre.com.my

22 Sep 2026