Professional Fuzrr ES2080A+ Wireless High Voltage Phasing Detector (Malaysia)

For high-voltage transmission lines, substation commissioning, phase sequence judgment, phase verification,and transformer vector group checking across electrical utility networks, maintaining safe and accurate wireless phase measurement is essential. MTM Precision Sdn. Bhd. is proud to present the official Fuzrr ES2080A+ Wireless High Voltage Phasing Detector in Malaysia.

The Fuzrr ES2080A+ is an advanced wireless high-voltage phase detector designed for line voltages ranging from 30V to 550kV. Utilizing 2.4GHz wireless transmission technology with a reach of up to 200 meters, the ES2080A+ consists of a handheld receiver host, X and Y detectors, and telescopic insulating rods. It features a 3.5-inch color LCD display that simultaneously shows phase angles, frequency, phase sequence, dynamic phasor diagrams, and numerical data. Integrated voice prompts (such as "X signal normal", "Y signal normal","in phase", and "out of phase") combined with red double flashing LEDs and audible beeping indicators ensure maximum field safety during live-line testing.

Below is an extensive technical breakdown of the product applications, key features, and detailed specifications for the ES2080A+ model, presented cleanly in plain text without tables, citations, or encoding errors.

Product Applications

High-voltage transmission line phase checking and phase verification from 30V up to 550kV
Substation power testing, busbar phase verification, and transformer vector group judgment
Phase sequence determination, frequency measurement, and live-line power checking for power utilities
Contact-type phase verification for insulated cables below 550kV and bare wires below 35kV
Non-contact phase verification for bare overhead high-voltage transmission lines exceeding 35kV

Key Features & Operational Advantages

Wide High-Voltage Test Range (30V to 550kV): Accommodates broad high-voltage testing needs,covering distribution networks up to ultra-high-voltage transmission systems.
200m Wireless Transmission Range: Powered by 2.4GHz wireless technology with an integrated transmission distance reaching up to 200 meters, keeping operators at a safe distance.
Simultaneous Phasor & Digital Display: 3.5-inch color LCD screen (72mm x 55mm display area) shows vector phasor diagrams, digital phase angles, and phase sequence on the same screen.
Voice & Sound/Light Dual Warning System: Features clear voice prompts alongside double red flashing light indicators and audible beepers to guide the technician during phase checks.
Dual Contact and Non-Contact Modes: Direct contact verification for bare wires below 35kV or insulated cables under 550kV; non-contact induction method for bare overhead lines exceeding 35kV (probe gradually approaches wire).
500-Group Data Storage Memory: Stores up to 500 test records with historical data review and flashing "FULL" memory alert.
Rugged IP45 Protection & Safety Compliance: Built with high-grade insulation, IP45 ingress protection,complying with GB13398-92, GB311.1-311.6-8, 3DL408-91, DL/T971-2005, IEC61481-A2:2004, and IEC61243-1 ed.2:2003 standards.

Technical Specifications — Fuzrr ES2080A+

Core Measurement Parameters

Primary Functions: Voice phase detector, phase angle measurement, phase sequence judgment,frequency test, power check
Phase Detection Voltage Range: 30V to 550kV
Phase Measurement Range: 0.0° to 360.0° (Precision: ≤ ±10°; Resolution: 0.1°)
Frequency Measurement Range: 30.00Hz to 100.00Hz (Precision: ≤ ±1Hz; Resolution: 0.01Hz)
Qualitative Differentiation:
- In Phase: 330° to 360° and 0° to 30°
- Out of Phase: 90° to 150° and 210° to 270°
Transmit Frequency: 2.4GHz wireless transmission
Wireless Transmission Distance: Integrated transmission distance of about 200 meters

Operating Modes & Indication System

Phase Detector Mode:
- Bare wires below 35kV or insulated wires under 550kV may contact the wire to verify phase.
- When bare line voltage exceeds 35kV, non-contact phasing tester mode must be used (probe gradually approaches then verifies phase).
Phase Indication: Phasor diagram and figures displayed simultaneously on screen
Work Indication: Sound and light indication function; red double flashing light indicator and audible beep-beep-beep sound
Voice Prompts: Integrated voice prompts for signal status and phase results ("X signal normal", "Y signal normal", "same phase / in phase", "different phase / out of phase")

Data Management & Power

Data Storage: 500 groups (flashing "FULL" symbol indicates storage memory is full)
Data Access: Historical record access supported
Power Supply:
- Host: Built-in 3.7V rechargeable lithium battery
- Detector: Built-in 3.7V rechargeable lithium battery
Power Dissipation: Detector: 80mA Max; Host: 300mA Max

Hardware, Physical & Safety Parameters

Display Screen: 3.5 inches color screen (LCD display size: 72mm x 55mm)
Instrument Dimensions:
- Host: Length 187mm x Width 119mm x Height 48mm
- Detector: Width 50mm x Thickness 28mm x Height 114mm
Instrument Weights:
- Detector: Single detector about 150g (including hook and battery)
- Host: Host about 350g (including battery)
Ingress Protection Rating: IP45
Suitable Safety Regulations & Standards: GB13398-92, GB311.1-311.6-8, 3DL408-91 standards and national power industry standard "General technical conditions for 1kV~35kV portable phase detectors for live work DL/T971-2005"; Complies with IEC61481-A2:2004 and IEC61243-1 ed.2:2003 standards

Why Choose MTM Precision in Malaysia?

At MTM Precision Sdn. Bhd., we supply genuine Fuzrr wireless high-voltage phasing detectors, high-voltage test tools, and specialized electrical instruments across Malaysia, backed by local warranty coverage,technical support, calibration services, and reliable after-sales assistance.

Contact MTM Precision

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

Website:

www.mtmpre.com

.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-660 7346

Office Tel: +603-80807172