Expand Your Multimeter & Oscilloscope into a 600A Current Diagnostic System Without Breaking a Wire: High-Precision Clamp Current Probes for Malaysian Engineers
Across Malaysia’s industrial switchrooms, commercial HVAC plant rooms, solar PV farms, and automotive or automation workshops, most engineers already carry a trusted digital multimeter (DMM) or portable oscilloscope. Yet the moment a job requires measuring hundreds of amperes—or capturing motor startup waveforms and variable-frequency drive (VFD) harmonics—standard multimeters hit a hard 10A or 20A inline limit. Shutting down equipment to break heavy power cables causes costly downtime, while standalone clamp meters cannot feed live current waveforms directly into an oscilloscope.
Engineered to bridge that exact gap, the PEAKMETER PM3300 Clamp AC Current Probe and PEAKMETER PM3301 Clamp AC/DC Current Probe turn any standard millivolt-capable multimeter or oscilloscope into a non-invasive 600A current diagnostic tool. Weighing just 180.5 grams with a generous 35mm jaw opening, an extendable 1-meter test lead, and IEC 61010-1 / IEC 61010-2-032 / CAT III 600V safety certification, both probes give Malaysian electrical contractors and plant maintenance teams fast, safe current expansion in crowded panels.
Plug-and-Play 600A AC Current Expansion with Zero Battery Hassle: The PEAKMETER PM3300
When auditing commercial distribution boards, balancing three-phase motor loads, or monitoring chiller compressor currents over extended periods, technicians need a simple, dependable sensor that connects directly to a multimeter or scope without worrying about dead batteries inside the tool bag.
The PEAKMETER PM3300 Clamp AC Current Probe delivers straightforward, passive AC current sensing built for everyday switchroom diagnostics:
-
Dual 60A & 600A Ranges with Direct Millivolt Scaling: Measures AC current from 45Hz to 1000Hzacross 60A (10mV : 1A output ratio) and 600A (1mV : 1A output ratio) ranges with ±(2.0%+5) accuracy—allowing engineers to read amperage directly on their multimeter’s mV scale without complicated mental math.
-
Wide 35mm Jaw & Battery-Free Reliability: Featuring a 35mm maximum jaw opening in a slim 187mm × 66mm × 34mm housing, the PM3300 slips easily around thick feeder cables and stays ready for action anytime without internal batteries to replace.
Mastering Solar DC, Battery Banks & Inverter Waveforms: The PEAKMETER PM3301
As Malaysian commercial rooftops, EV charging hubs, telecom backup rooms, and industrial automation lines increasingly rely on high-current direct current (DC) and mixed AC/DC power electronics, standard AC-only probes cannot measure solar string currents, battery charging loops, or DC motor drives.
The PEAKMETER PM3301 Clamp AC/DC Current Probe brings full AC and DC current sensing—plus real-time waveform output—to any multimeter or oscilloscope:
-
60A & 600A AC/DC Dual-Mode Output for Solar & Industrial Diagnostics: Measures both DC currentand 45Hz–1000Hz AC current non-invasively across 60A (10mV : 1A) and 600A (1mV : 1A) ranges with ±(2.0%+5) accuracy—ideal for tracing solar combiner currents, UPS battery banks, heavy starter motors, and inverter drive waveforms.
-
Dedicated DC Zero-Adjustment Dial & Clear Status Indicators: To eliminate magnetic drift during DC Hall-effect measurements, the PM3301 features a front-panel DC current zero-adjustment dial that locks in ±(2.0%+5) accuracy after zeroing, paired with a bright work indicator light, low-battery indication, and 2 × 1.5V AAA battery power for dependable field performance.
Equip Your Team with Versatile PEAKMETER Current Probe Accessories
Whether your engineers need battery-free, plug-and-play 600A AC current expansion with the PEAKMETER PM3300, or 600A AC/DC solar, battery, and oscilloscope waveform diagnostics with the PEAKMETER PM3301, PEAKMETER delivers CAT III 600V safety-certified precision tailored for Malaysian job sites.
For electrical contractors, solar PV O&M teams, industrial maintenance engineers, calibration labs, and resellers across Malaysia looking for genuine PEAKMETER instruments, practical product recommendations,and responsive local support, MTM Precision Sdn. Bhd. is ready to assist your operations.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
Office Tel: +603-80807172