Catching Motor Inrush Spikes & Rugged Site Drops Without Slowing Down: Double-Molded 600A Clamp Meters for Malaysian Technicians
When an industrial chiller compressor, booster pump, or factory conveyor motor trips its breaker right at startup, standard clamp meters rarely catch the culprit—their displays react too slowly to capture the split-second inrush surge. Meanwhile, working inside hot, crowded Malaysian switchrooms or outdoor solar combiner bays puts tools through constant knocks, drops, and cramped wire routing where a standard thin-cased meter can easily crack or slip out of gloved hands.
Engineered with a sleek 24mm to 26mm jaw opening and EN 61010-1 / CAT III 600V safety protection, the updated PEAKMETER PM2008A / PM2008B AC Digital Clamp Meters and rugged double-molded PEAKMETER PM2108 / PM2108A AC/DC Digital Clamp Meters give electrical contractors, HVAC technicians, and solar maintenance engineers fast inrush capture, drive filtering, and thermal diagnostics built for demanding field conditions.
Fast AC Panel Diagnostics, Inrush Capture & Drive Filtering: The PEAKMETER PM2008A & PM2008B
Whether you are auditing three-phase commercial distribution boards or troubleshooting variable-speed HVAC drives, technicians need an agile clamp meter that slips cleanly around tight conductors while cutting through electrical noise. Weighing roughly 238 to 241 grams with a slim 24mm jaw and built-in worklight and backlight, the updated PEAKMETER PM2008A and PM2008B handle dark switchrooms with ease:
-
PEAKMETER PM2008A (Dependable Everyday 600A AC & Thermal Troubleshooting): Built for daily commercial and industrial maintenance, the PM2008A covers 2A to 600A AC current, 600V AC/DC voltage, 20MΩ resistance, 2mF capacitance, and K-type temperature measurement (-20°C to 1000°C) on a clear 2000-count display with MAX capture and Data Hold.
-
PEAKMETER PM2008B (6000-Count Precision, Inrush Surge Capture & LPF Drive Filtering):Stepping up for motor and drive specialists, the PM2008B upgrades to a 6000-count display and adds 100ms Inrush Current capture (60A/600A) alongside a Low-Pass Filter (LPF)—letting technicians catch motor startup surges and strip away VFD harmonics, while expanding diagnostics to 60MΩ resistance, 100mF capacitance, 10MHz frequency, and duty cycle.
Double-Molded Toughness with 600A AC/DC & 100ms Inrush Diagnostics: The PEAKMETER PM2108 & PM2108A
When your service calls span solar PV combiner boxes, backup battery rooms, EV chargers, and heavy three-phase AC panels—and your meter regularly gets knocked around inside tool bags or tight mechanical rooms—durability and AC/DC versatility become non-negotiable.
Built inside an impact-absorbing double-molded housing weighing 237 grams with a 26mm jaw openingand True RMS sensing, the updated PEAKMETER PM2108 and PM2108A AC/DC Digital Clamp Metersbring heavy-duty resilience to multi-system electrical work:
-
Non-Invasive AC/DC Current & 100ms Inrush Capture: Both models measure AC current and DC current without breaking wires—across 60A and 600A ranges on the 6000-count PM2108 and 40A and 400A ranges on the 4000-count PM2108A—while capturing 100ms Inrush Current spikes (60A/600A)to diagnose hard-starting motors and compressors immediately.
-
High-Voltage 1000V DC Headroom, 100mF Capacitance & Thermal Checks: Both meters support DC voltage up to 1000V (alongside 600V AC on the PM2108A and 1000V AC on the PM2108), test large motor capacitors up to 100mF, measure frequency up to 10MHz, and check temperature from -20°C to 1000°C—complete with a built-in worklight, backlight, and MAX/MIN capture.
Equip Your Team with Rugged, Inrush-Ready PEAKMETER Clamp Meters
Whether your technicians need slim 600A AC diagnostics with inrush capture and LPF filtering from the PEAKMETER PM2008A / PM2008B, or double-molded AC/DC toughness with 1000V DC and 100ms inrush capability from the PEAKMETER PM2108 / PM2108A, PEAKMETER delivers safety-certified reliability built for Malaysian job sites.
For electrical contractors, solar PV installers, HVAC specialists, industrial maintenance teams, and resellers across Malaysia looking for genuine PEAKMETER instruments, practical product recommendations, and responsive local support, MTM Precision Sdn. Bhd. is ready to assist your operations.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
Office Tel: +603-80807172