Heavy-Duty 1000A–3000A Switchroom & Industrial Power Diagnostics: High-Capacity Clamp Meters Built for Malaysian Contractors

Heavy-Duty 1000A–3000A Switchroom & Industrial Power Diagnostics: High-Capacity Clamp Meters Built for Malaysian Contractors

Walk into a main incoming switchgear room, a commercial high-rise riser, or an industrial manufacturing substation in Malaysia, and standard 400A or 600A clamp meters immediately hit their physical and electrical limits. Thick main feeder cables and parallel busbars carry massive currents that require a wider jaw opening, higher amperage capacity, and CAT III 1000V or CAT IV 600V safety protection. Worse still, troubleshooting variable-speed drives or phantom voltages on main distribution panels without specialized filtering leads to false readings and wasted downtime.
 
Engineered with a generous 35mm jaw opening and a rugged, ergonomic 247mm housing, the patented PEAKMETER PM2028A / PM2028B AC Digital Clamp Meters and PEAKMETER PM2028S Smart AC Digital Clamp Meter give electrical contractors, utility technicians, and plant reliability engineers heavy-duty diagnostic power built for Malaysia’s toughest industrial environments.
 

High-Capacity 1000A Diagnostics & Flexible 3000A Expansion: The PEAKMETER PM2028A & PM2028B

When commissioning main distribution boards, auditing commercial generator sets, or troubleshooting industrial motor control centers, technicians need a clamp meter capable of handling massive loads while cutting through real-world electrical interference. Certified to EN 61010-1, EN 61010-2-032, and CAT III 1000Vsafety standards, both the PEAKMETER PM2028A and PM2028B deliver comprehensive 6000-count True RMS diagnostics:
 
  • 1000A Direct Clamping Plus Optional 3000A Flexible Rogowski Coil (PM2019A): With a wide 35mm jaw, both models measure AC current up to 1000A directly—and can pair with the optional PM2019A flexible current probe to expand AC current measurement up to 3000A around oversized busbars and tightly bundled feeders where rigid jaws cannot fit.
  • VFD Drive Filtering, Large Capacitors & Thermal Diagnostics: Beyond 1000V AC/DC voltage, 60MΩ resistance, and 10kHz frequency, both meters feature dedicated VFD measurement mode, test motor start/run capacitors up to 60mF, and measure temperature from -20°C to 1000°C—backed by a built-in worklight, backlight, and NCV live-wire screening for dark switchrooms.
  • Stepping Up to Ghost-Voltage Elimination (PM2028B): While the PM2028A covers every heavy industrial electrical and thermal test, the PM2028B adds Low Impedance (LoZ) 1000V AC/DC voltage mode alongside an analog bar graph—draining away stray phantom voltages on long industrial cable runs so engineers never mistake induced noise for a live circuit.

Point-and-Test Smart 1000A Auto-Scan & Dual-Display Speed: The PEAKMETER PM2028S

For frontline commercial maintenance teams and electrical contractors who want heavy-duty 1000A capacityand CAT IV 600V utility-grade safety without stopping to switch functions manually on every test, the PEAKMETER PM2028S Smart AC Digital Clamp Meter streamlines high-power diagnostics into a fast, intuitive workflow:
 
  • Intelligent V/Ω/A/Cap Auto-Scan Up to 1000A: Simply clamp around a heavy feeder or touch your test leads to a terminal—the PM2028S automatically detects AC/DC voltage (up to 600V), resistance (up to 10MΩ), capacitance, or AC current across 60A, 600A, and 1000A ranges with zero manual dial hunting.
  • Dual-Display Clarity & Utility-Grade CAT IV 600V Protection: Its 6000-count dual backlit displaypresents primary voltage or current readings alongside frequency (up to 1kHz) at a glance, while CAT IV 600V certification and touch-free NCV detection give technicians confidence when working near incoming service entrances and main transformers.

Equip Your Team with High-Capacity PEAKMETER Clamp Meters

Whether your engineers need 1000A–3000A expandable current, VFD filtering, 60mF capacitance, 1000°C thermal checks, and LoZ ghost-voltage protection with the PEAKMETER PM2028A / PM2028B, or CAT IV 600V Smart Auto-Scan speed up to 1000A with the PEAKMETER PM2028S, PEAKMETER delivers patented, heavy-duty reliability built for Malaysian power infrastructure.
 
For electrical contractors, M&E consultants, industrial maintenance teams, and resellers across Malaysia looking for genuine PEAKMETER instruments, practical product recommendations, and responsive local support, MTM Precision Sdn. Bhd. is ready to assist your operations.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

16 Nov 2026