Mastering Both AC Power & DC Control Systems in Tight Spaces: Dual-Display 600A AC/DC Clamp Meters for Malaysian Engineers
Across Malaysia’s commercial solar rooftops, telecom backup rooms, EV charging bays, and automated manufacturing plants, electrical systems rarely stay neatly divided into "AC-only" or "DC-only" jobs. One minute, a technician is verifying three-phase AC chiller loads inside a cramped distribution board; the next,they are tracing DC battery charging currents, checking sensitive microampere HVAC flame sensors, or trying to figure out whether a stray voltage reading on a long cable run is real power or harmless ghost coupling.Carrying separate meters for AC/DC current, VFD noise, and thermal checks quickly weighs down any tool belt.
Weighing just 177 to 180 grams with a slim 24mm jaw opening and a crisp 6000-count dual display, the patented PEAKMETER PM2118 AC/DC Digital Clamp Meter and PEAKMETER PM2118S Smart AC/DC Digital Clamp Meter bring full 600A AC and DC current versatility into a featherweight, CAT III 600V safety-certified design built for real-world Malaysian job sites.
Deep AC/DC, Microampere, VFD & Thermal Diagnostics: The PEAKMETER PM2118
When industrial maintenance engineers or HVAC specialists troubleshoot complex machinery, they often run into subtle faults that standard clamp meters miss—such as stray ghost voltages in crowded conduits, high-frequency noise on variable-speed motor drives, or weak microampere flame-rectification signals in commercial boilers and burners.
Weighing an ultra-light 180 grams, the PEAKMETER PM2118 AC/DC Digital Clamp Meter packs an entire diagnostic toolkit into one slim instrument:
-
Non-Invasive 600A AC/DC Current Plus 200µA DC Control Signal Precision: Measures both AC and DC currents up to 600A without breaking a single wire—ideal for solar PV combiner strings, UPS battery banks, and three-phase panels—while also adding dedicated 0–200µA DC microampere testing for HVAC flame sensors and sensitive industrial control loops.
-
Eliminating Ghost Voltages & Drive Noise (LoZ + 1kHz LPF): Features Low Impedance (LoZ) voltage mode (1.0V–600V) to drain away misleading phantom voltages, paired with a 1kHz Low-Pass Filter (LPF) that cleans up high-frequency Variable Frequency Drive (VFD) harmonics for rock-steady motor diagnostics.
-
Motor Capacitors, Thermal Checks & Simultaneous Dual Readouts: Evaluates motor start/run capacitors up to 6000uF, 60MΩ resistance, and temperature from -20°C to 1000°C, while displaying frequency (up to 1kHz) alongside voltage or current on its dual backlit screen—backed by touch-free NCV live-wire screening.
Point-and-Test Smart AC/DC Auto-Scan for Fast Service Calls: The PEAKMETER PM2118S
When you are balanced on a ladder inspecting an overhead distribution panel or working one-handed inside a vehicle or telecom cabinet, rotating a dial between functions wastes valuable time. Technicians want a meter that recognizes the circuit automatically and shows the full picture at a single glance.
At just 177 grams, the PEAKMETER PM2118S Smart AC/DC Digital Clamp Meter turns multi-system electrical testing into a fast, intuitive workflow:
-
Intelligent V/Ω/A Auto-Scan Across AC & DC Circuits: Simply clamp onto a conductor or touch your leads to a terminal—the PM2118S automatically identifies AC/DC voltage (up to 600V), resistance (up to 10MΩ), or AC/DC current (from 300mA DC / 60A–600A AC/DC) without manual range hunting.
-
Simultaneous Voltage + Current Dual-Display Clarity: Its dual backlit LCD can display AC voltage alongside AC current or DC current simultaneously—letting solar, inverter, and maintenance engineers verify both voltage and load current in one quick check, complete with 1kHz frequencyreadouts and NCV live-wire alerts.
Equip Your Team with Featherweight AC/DC PEAKMETER Clamp Meters
Whether your engineers need 600A AC/DC current, 200µA microampere sensitivity, LoZ/LPF filtering, and 1000°C thermal diagnostics with the PEAKMETER PM2118, or Smart V/Ω/A Auto-Scan and simultaneous voltage-and-current display with the PEAKMETER PM2118S, PEAKMETER delivers patented, safety-certified agility built for modern Malaysian job sites.
For electrical contractors, solar PV installers, HVAC specialists, facility maintenance teams, and resellers across Malaysia looking for genuine PEAKMETER instruments, practical product recommendations, and responsive local support, MTM Precision Sdn. Bhd. is ready to assist your operations.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
Office Tel: +603-80807172