Bridging High-Current AC/DC Diagnostics & Everyday Panel Efficiency: Practical Clamp Meters for Malaysian Engineers

Bridging High-Current AC/DC Diagnostics & Everyday Panel Efficiency: Practical Clamp Meters for Malaysian Engineers

Across Malaysia’s commercial buildings, solar PV installations, backup battery rooms, and manufacturing lines, electrical troubleshooting rarely sticks to just one type of circuit. One hour, an engineer is tracing high-current DC charging loops on a solar inverter or UPS battery bank; the next, they are verifying three-phase AC chiller loads or checking why a variable-speed motor is running hot. Carrying separate meters for AC current,DC current, VFD noise, and temperature slows down service calls and crowds every tool bag.
 
With the PEAKMETER PM2117 AC/DC Clamp Meter and the patented PEAKMETER PM2018A AC Digital Clamp Meter, PEAKMETER offers two slim, CAT III 600V safety-certified instruments tailored to the real-world workflows of Malaysian electrical contractors, solar technicians, and facility maintenance crews.
 

All-In-One 600A AC/DC, VFD & Thermal Mastery: The PEAKMETER PM2117

Whether you are commissioning commercial solar arrays, maintaining telecom backup battery banks, or troubleshooting industrial motor drives, standard AC-only clamp meters hit a wall the moment direct current (DC) enters the picture. Weighing just 213 grams with a crisp 6000-count backlit display, the PEAKMETER PM2117 AC/DC Clamp Meter packs deep multi-system diagnostic power into an agile, easy-to-handle frame:
 
  • True Non-Invasive AC & DC Current Up to 600A: Measures both AC current and DC current across 60A and 600A ranges without disconnecting a single cable—making it effortless to verify solar string combiner currents, EV charger outputs, heavy automotive starters, and three-phase AC distribution loads with one tool.
  • Cutting Through Variable Frequency Drive (VFD) Interference: When inverter-driven HVAC chillers or factory pumps act up, dedicated VFD measurement mode filters out high-frequency carrier noise so technicians get stable, trustworthy voltage and frequency readings (up to 999.9kHz by voltage and 999.9Hz by clamp).
  • Motor Capacitors, Thermal Checks & Live-Wire Screening in One Go: Beyond 600V AC/DC voltageand 60MΩ resistance, the PM2117 tests large motor start/run capacitors up to 60mF and measures temperature from -20°C to 1000°C, while Non-Contact Voltage (NCV), single-probe LIVE detection, and MAX/MIN capture keep switchroom inspections fast and safe.

Fast, Auto-Ranging Everyday AC Diagnostics in Tight Spaces: The PEAKMETER PM2018A

Not every service call requires deep DC or thermal analysis—for daily commercial maintenance, panel walk-throughs, and residential or light-industrial electrical troubleshooting, technicians want a rugged, slim-jawed AC clamp meter that responds quickly and slips easily around crowded wires.
 
Featuring a patented ergonomic housing and a sleek 24mm jaw opening, the PEAKMETER PM2018A AC Digital Clamp Meter keeps routine electrical checks straightforward and reliable:
 
  • From Low-Draw Control Loads to 600A Main Feeders: Automatically ranges across 2A, 20A, 200A, and 600A AC current alongside 600V AC/DC voltage and 20MΩ resistance—giving electricians accurate visibility on everything from small exhaust fans to heavy distribution feeders without manual dial guesswork.
  • Built-In Safety & Visibility for Dim Electrical Risers: Equipped with touch-free NCV live-wire screening, audible continuity and diode testing, a clear 2000-count backlit display, and EN 61010-1 / CAT III 600V safety certification, the PM2018A makes quick work of daily fault finding in tight switchboards.

Equip Your Team with Purpose-Built PEAKMETER Clamp Meters

Whether your engineers need the 600A AC/DC current, VFD filtering, 60mF capacitance, and 1000°C thermal versatility of the PEAKMETER PM2117, or the slim-jawed, auto-ranging 600A AC reliability of the PEAKMETER PM2018A, PEAKMETER delivers safety-certified tools built for real-world Malaysian job sites.
 
For electrical contractors, solar PV installers, HVAC specialists, facility maintenance teams, and resellers across Malaysia looking for genuine PEAKMETER instruments, practical product recommendations, and responsive local support, MTM Precision Sdn. Bhd. is ready to assist your operations.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

16 Nov 2026