FNIRSI Malaysia: Deep-Dive Technical Guide to the FNIRSI 2C53P 3-in-1 50MHz Tablet Oscilloscope, 20,000-Count Multimeter & 10MHz Signal Generator
When electronics technicians, maintenance engineers, and field service professionals across Malaysia need a dependable, all-in-one diagnostic tool, precision specifications matter just as much as portability. The FNIRSI 2C53P is meticulously engineered to combine a 50MHz dual-channel digital oscilloscope, a 20,000-count true 4½-digit digital multimeter, and a 10MHz DDS waveform generator into an ultra-compact, featherweight tablet. Weighing only 364g and housed in a striking blue-and-black chassis, it delivers lab-grade analytical capabilities directly to the palm of your hand.
Precision 50MHz Dual-Channel Oscilloscope with Advanced Visualizing Data
The 2C53P’s oscilloscope section packs robust performance into a portable screen format, giving engineers fast and accurate insight into complex circuit behavior:
-
High-Speed Sampling & Memory Depth: Featuring 2 independent input channels, 50MHz analog bandwidth, a 250MSa/s real-time sampling rate, and a 64Kbyte memory depth, it accurately captures fast transient signals and continuous waveforms.
-
Flexible Sensitivity & Triggering: Vertical sensitivity spans from 10mV/div to 10/div with a selectable 20MHz limited bandwidth filter to remove high-frequency noise, while time-base scales range from 10ns/div to 10s/div. Supported by Auto, Normal, and Single trigger modes and maximum input voltage protection up to ±400V, it handles demanding electrical environments safely.
-
Advanced Waveform Insights & Math Operations: Users can leverage 12 automatic measurement parameters (including Max, Min, Avg, RMS, Amp, Pk-Pk, Freq, Cycle, Duty+, Duty-, Width+, and Width-) alongside robust waveform math functions including addition, subtraction, multiplication, division, reverse, absolute value, and FFT spectrum analysis. Visual data is further enhanced by adjustable afterglow persistence and X-Y Lissajous mode.
Built-In 10MHz DDS Waveform & Function Generator
Eliminating the need to carry an external signal source, the 2C53P features a dedicated single-channel waveform generator powered by a 100MSa/s sampling rate, 8-bit vertical resolution, and a 512pts wave length.
-
12 Essential Test Waveforms: Instantly output Sine waves (1Hz–10MHz), Square waves (1–5MHz), Sawtooth waves (1Hz–10MHz), Triangle waves (1Hz–5MHz), Half-wave (1Hz–5MHz), Full-wave (1Hz–5MHz), positive/negative steps, DC signals, exponential rise/fall, multitone, and sync pulse signals.
Professional 4½-Digit (20,000-Count) Digital Multimeter
Far surpassing standard service meters, the integrated digital multimeter provides true 4½-digit precision across a comprehensive suite of testing ranges:
-
Voltage & Current Precision: Measures DC voltage up to 1000V and AC voltage up to 750.0V (both with ±(0.5%+3) to ±(1%+3) accuracy), alongside precise AC and DC current measurements spanning from delicate 19.999mA ranges up to 9.999A.
-
Component, Temperature & Safety Testing: Provides high-resolution resistance testing up to 19.999MΩ, wide capacitance ranges up to 99.99mF, frequency measurements up to 9.999MHz, and a wide-range temperature probe input (-55°C to 1300°C). It also features dedicated Diode testing, audible Continuity testing, Live wire detection, and Non-Contact Voltage (NCV) safety detection.
Vivid 4.3-Inch IPS Touchscreen & Portable Field Endurance
Designed for optimal readability and control, the 2C53P features a vibrant 4.3-inch IPS tempered glass touchscreen (480×272 resolution) that brings clear waveform rendering and intuitive UI navigation to life. Powered by an internal 3.7V 4000mAh lithium battery delivering up to 4 hours of continuous standby/runtime, it ensures complete cordless freedom for on-site troubleshooting. Measuring a compact 145×98×35mm and weighing just 364g, it ships fully equipped with the main device, two P6100 probes, an alligator clip probe, a multimeter probe, a USB data cable, and a user manual.
Source Genuine FNIRSI Instruments in Malaysia
Whether you are upgrading your field service toolkit, equipping an educational electronics lab, or streamlining industrial maintenance work across Malaysia, the FNIRSI 2C53P delivers unmatched versatility. Visit our showroom in Puchong, Selangor to experience it firsthand, or contact our team for technical specifications and quotations.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
Office Tel: +603-80807172