FNIRSI Malaysia: FNIRSI DPOX180H Handheld 2-in-1 Digital Phosphor Oscilloscope & 20MHz DDS Waveform Generator
For field service engineers, hardware technicians, automotive diagnostic specialists, and electronics hobbyists across Malaysia, carrying a high-performance oscilloscope often means choosing between bulky benchtop units or underpowered pocket gadgets. The FNIRSI DPOX180H shatters this compromise by packing a robust 2-in-1 handheld digital phosphor oscilloscope and a 20MHz Direct Digital Synthesis (DDS) waveform generator into a compact, ergonomic blue-and-black chassis weighing just 325g. Engineered with high-voltage anti-burning protection, it delivers laboratory-grade signal analysis straight to your palm, whether you are servicing industrial equipment in Selangor, debugging embedded boards in Penang, or troubleshooting on-site in Kuala Lumpur.
Powerful 180MHz Dual-Channel Digital Phosphor Oscilloscope
Despite its portable handheld footprint, the FNIRSI DPOX180H makes zero sacrifices on core measurement bandwidth and capture fidelity:
-
High-Speed Signal Acquisition: Featuring 2 independent channels, a 180MHz analog bandwidth, a 500MSa/s real-time sampling rate, an ultra-fast rise time under 1.8ns, and a deep 120kpts memory depth, it cleanly captures fast logic transitions, high-frequency clocks, and transient pulses.
-
Digital Phosphor Display & Rapid Refresh: Utilizing advanced digital phosphor technology alongside a high waveform capture rate of up to 50,000 wfms/s, the DPOX180H reveals rare, low-probability signal anomalies and subtle jitter with exceptional visual clarity.
-
Flexible Sensitivity & Triggering: Vertical sensitivity spans from 5mV/div to 10V/div, while time-base scales range from 5ns/div to 50s/div. Backed by 1MΩ input impedance and reliable Auto, Normal, and Single trigger modes, it adapts seamlessly to diverse electrical signals.
-
Automated Measurements: Users can quickly evaluate signal characteristics using 12 automatic measurement parameters, including Max, Min, Avg, RMS, Peak, Peak-to-Peak, Frequency, Cycle, positive/negative pulse widths, and positive/negative duty cycles.
Built-In 20MHz DDS Waveform & Function Generator
Eliminating the need to carry a separate signal generator, the DPOX180H features a dedicated single-channel waveform generator with 1Hz frequency resolution.
-
Comprehensive Waveform Library: Instantly output 14 distinct test signal types, including Sine waves up to 20MHz (1VPP), Square waves up to 10MHz (1VPP), Triangle waves up to 10MHz (1VPP), Sawtooth and anti-sawtooth waves, ladder waves, half-wave and full-wave signals, exponential and logarithmic waves, log-periodic waves, square root waves, multi-tone signals, and sync pulses.
Ergonomic Handheld Design with Vibrant IPS Display & High-Voltage Protection
Designed for practical field use, the DPOX180H features a crisp 2.8-inch IPS screen (320×240 resolution) that renders waveforms with sharp contrast and wide viewing angles. Powered by a built-in 3.7V 3000mAh lithium battery delivering up to 4 hours of continuous standby/runtime, it ensures complete cordless freedom. Equipped with robust high-voltage anti-burning protection, measuring up to 135×90×40mm and weighing only 325g, it ships fully accessorized with the main device, two P6100 high-voltage probes, a charger, a USB data cable, and a user manual.
Source Genuine FNIRSI Instruments in Malaysia
Upgrade your mobile diagnostic toolkit, field service bag, or electronics workbench with reliable FNIRSI test and measurement equipment. Visit our showroom in Puchong, Selangor to experience the FNIRSI DPOX180H firsthand, or contact our team for technical consultations, specifications, and quotations.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
Office Tel: +603-80807172