FNIRSI Malaysia: FNIRSI DMC-100 Intelligent 10,000-Count AC/DC Clamp Meter (600A, CAT III 1000V) with Power Measurement & Real-Time Curve Display
For industrial electricians, HVAC engineers, solar and EV maintenance specialists, and automotive technicians across Malaysia, measuring heavy currents safely without breaking circuits is critical to fast, uninterrupted diagnostics. Conventional clamp meters often force technicians to measure voltage and current separately—making live power calculations cumbersome—while offering little insight into fluctuating load behavior. Certified to CAT III 1000V overvoltage safety standards, the new FNIRSI DMC-100 elevates clamp metering into a modern analytical instrument—combining 600A AC/DC non-invasive current measurement, a dual-chip simultaneous voltage-and-current power calculation mode, real-time data curve plotting, and 10,000-count multimeter precision inside a sleek, 191g handheld body.
Dual-Chip Simultaneous Power Calculation & 600A AC/DC Current Testing
Engineered for demanding electrical environments—from factory motor control centers in Selangor and Penang to commercial distribution boards in Kuala Lumpur and Johor—the FNIRSI DMC-100 gives technicians deep insight into live power consumption and circuit health:
-
600A AC & DC Clamp Measurement with 25mm Jaw Opening: Safely clamp around thick conductors, battery cables, and distribution feeders up to 25mm in diameter to measure both AC current and DC current across 99.99A and 600.0A ranges (±(2.5%+10) accuracy) without disconnecting live wires.
-
Dual-Chip Design & Automatic Power Calculation: Powered by an advanced dual-chip architecture, the DMC-100 measures voltage and current simultaneously and automatically calculates real-time electrical power—ideal for verifying inverter efficiency, solar arrays, EV chargers, and industrial motor loads in a single step.
-
Real-Time Data Curve Display & Data Storage: Unlike static numeric clamp meters, the DMC-100 plots live waveform trends directly on its screen and supports onboard data storage, allowing engineers to capture inrush behavior, load fluctuations, and intermittent anomalies effortlessly.
True 10,000-Count Multimeter Precision & Essential Safety Functions
Beyond clamp current and power diagnostics, the DMC-100 doubles as a comprehensive 10,000-count digital multimeter controlled via intuitive button-adjusted gear selection:
-
High-Resolution AC & DC Voltage: Measures DC voltage across 9.999V, 99.99V, and 999.9V ranges (±(0.5%+3) accuracy) and AC voltage across 9.999V, 99.99V, and 750.0V ranges (±(1%+3) accuracy).
-
Wide Resistance, Capacitance, Frequency & Temperature Ranges: Covers resistance from 999.9Ω up to 99.99MΩ (±(1.5%+3)), wide capacitance testing from 9.999nF all the way up to 99.99mF for motor-start and power-supply filter capacitors, frequency readings from 9.999Hz up to 9.999MHz (±(0.1%+2)), and wide-range temperature measurement from -55°C to 1300°C (-67°F to 2372°F).
-
NCV, Live Wire Recognition & Built-In Flashlight: Equipped with Non-Contact Voltage (NCV) sensing, single-probe Live wire recognition, Diode testing, audible Continuity checks, and an integrated work flashlight for safe operation inside dimly lit electrical panels and engine bays.
Crisp 2.0-Inch Full-Color TFT Display & USB-C Rechargeable Portability
Housed in a rugged black chassis measuring just 195×74×29mm and weighing only 191g, the FNIRSI DMC-100 features a bright 2.0-inch full-color TFT display (240×320 resolution) that renders multi-parameter readouts and live trend curves with sharp contrast. Powered by an internal 3.7V/1500mAh rechargeable lithium battery with convenient Type-C charging and auto power-off, it eliminates disposable battery replacements. Certified to CE and RoHS standards, each unit arrives ready to deploy straight out of the box with the DMC-100 main device, multimeter probes, a Type-C charging cable, and a user manual.
Source Genuine FNIRSI Clamp Meters & Diagnostic Tools in Malaysia
Upgrade your electrical inspection kit, automotive service bay, or industrial maintenance department with genuine FNIRSI test and measurement instruments. Visit our showroom in Puchong, Selangor to experience the FNIRSI DMC-100 firsthand, or contact our team for technical consultations, product specifications, and competitive quotations.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
Office Tel: +603-80807172