FNIRSI DSO-TC4 Multifunctional Transistor Oscilloscope in Malaysia: The Ultimate 3-in-1 Pocket Testing Lab for Engineers, Technicians, and Makers

FNIRSI DSO-TC4 Multifunctional Transistor Oscilloscope in Malaysia: The Ultimate 3-in-1 Pocket Testing Lab for Engineers, Technicians, and Makers

In the fast-paced world of electronics repair, circuit prototyping, and industrial maintenance across Malaysia,carrying multiple bulky benchtop instruments to every job site or workbench is no longer practical. Whether you are troubleshooting a faulty power supply in a busy repair shop, debugging an embedded microcontroller project in a university lab, or inspecting control boards on a factory floor, speed, accuracy, and portability are everything. Enter the FNIRSI DSO-TC4, a remarkably capable, next-generation 3-in-1 handheld testing instrument that seamlessly combines a high-speed digital oscilloscope, an intelligent electronic component tester, and a versatile DDS signal generator into one sleek, pocket-sized unit.
 
Designed as a massive leap forward from its predecessor, the DSO-TC3, the FNIRSI DSO-TC4 is engineered to solve the daily frustrations of modern electronics work. Instead of juggling separate meters, probes, and signal sources, you get an all-in-one diagnostic powerhouse that fits comfortably in the palm of your hand and weighs just 187 grams.
 

A Massive Leap in Oscilloscope Performance: 10MHz Bandwidth and 48MSa/s Sampling

For anyone who has used entry-level handheld scopes, signal distortion and sluggish refresh rates can make troubleshooting high-frequency circuits a guessing game. The FNIRSI DSO-TC4 completely transforms that experience by upgrading its analog bandwidth to a genuine 10MHz—twenty times higher than the 500kHz limit of the older DSO-TC3—paired with a real-time sampling rate of 48MSa/s.
 
This dramatic boost in processing power means you can confidently capture and analyze fast-switching PWM signals, communication buses, crystal oscillators, and switching power supply ripples with crisp clarity. The single-channel oscilloscope features a wide vertical sensitivity range from 10mV/div to 10V/div and a flexible time base scale spanning from 50ns/div all the way to 20s/div, allowing you to inspect both rapid transient spikes and slow-moving analog trends.
 
To make waveform analysis effortless in the field, the DSO-TC4 includes comprehensive trigger modes (Auto,Normal, and Single), an adjustable afterglow persistence mode (from 500ms to infinity) for spotting elusive intermittent glitches, and one-button auto-calibration. Furthermore, its built-in automatic measurement suite instantly calculates critical parameters on the fly—including Cycle, Frequency, Maximum, Minimum, RMS,Average, Peak-to-Peak (Vpp), Amplitude, positive/negative Duty Cycle, and positive/negative Pulse Width—saving valuable time during complex diagnostics.
 

Intelligent, Foolproof Transistor and Component Testing

Identifying unmarked SMD components or verifying whether a semiconductor has failed under load is one of the most time-consuming tasks on any workbench. The integrated Transistor Tester inside the FNIRSI DSO-TC4 eliminates the guesswork. Simply insert the component leads into the dedicated locking test socket or connect via the included test hooks, and the device automatically identifies the component type, maps out the exact pinout configuration, and displays key electrical parameters on screen.
 
Its broad component compatibility covers virtually every common passive and active part you will encounter:
 
  • Semiconductors: Automatically detects and analyzes NPN and PNP bipolar transistors (Triodes), N-channel and P-channel MOSFETs, JFETs, IGBTs, standard Diodes, Zener Diodes (Regulated Diodes),SCRs, and TRIACs.
  • Passive Components: Measures capacitance across an expansive range from 25pF up to 100mF,resistance from 0.1Ω to 50MΩ, and inductance from 10μH to 1000mH.
  • Sensors & IR Protocols: Goes beyond basic components by supporting direct testing of popular digital temperature and humidity sensors like the DS18B20 and DHT11, alongside built-in NEC infrared remote control protocol decoding—making it a dream tool for appliance repair technicians.

Built-In 13-Waveform Signal Generator for Active Circuit Stimulation

A great diagnostic tool shouldn't just passively observe a circuit; it should also be able to stimulate it. The FNIRSI DSO-TC4 houses a dedicated DDS Function Signal Generator capable of outputting frequencies up to 50kHz with a fine 1Hz resolution and an adjustable output amplitude ranging from 0.1V to 3V.
 
Whether you are injecting test signals into an audio amplifier stage, simulating sensor inputs for an ECU or PLC, or testing filter responses, the generator puts 13 distinct waveforms right at your fingertips. Alongside standard sine, square (with 0–100% adjustable duty cycle), sawtooth, and DC signals, you also get specialized waveforms including half-wave, full-wave, positive and negative steps, exponential rise and fall, multitone, sinc pulse, and Lorentz waves. Having an oscilloscope and a waveform generator working side-by-side in one handheld unit allows you to inject a signal and immediately observe the circuit's real-time response without cluttering your desk.
 

Upgraded Ergonomics, Crisp Display, and Seamless Data Sharing

Usability on the job site has been thoughtfully refined in the DSO-TC4. The device sports a brighter, larger 2.8-inch TFT full-color screen (upgraded from the 2.4-inch display on the TC3), ensuring waveforms, pinout diagrams, and measurement readouts remain sharp and easy to read even under bright workshop lighting. Its user interface supports eight languages—including English, Chinese, Japanese, Korean, German, Spanish,Portuguese, and Russian—making it accessible for international engineering teams and technical institutions across Malaysia.
 
Documentation and reporting are also simpler than ever. Unlike the previous generation, the DSO-TC4 features built-in picture storage and USB image sharing, enabling engineers and students to save waveform screenshots directly onto the device and transfer them to a PC for lab reports, client documentation, or team collaboration.
 
Powered by a built-in 3.7V 1500mAh rechargeable lithium battery offering up to 4 hours of continuous standby/operation time, the unit comes ready to work right out of the box with a complete accessory kit—including a high-voltage P6100 oscilloscope probe, an ordinary probe, three precision test hooks, and a USB data/charging cable.
 

Why Source Your FNIRSI Instruments in Malaysia from MTM Precision?

When investing in precision electronic test and measurement equipment, buying from an established local specialist ensures you receive genuine products, reliable technical support, and fast local fulfillment. Whether you are equipping a commercial R&D lab, upgrading a technical college classroom, or ordering a reliable field tool for your personal toolkit, MTM Precision Sdn. Bhd. is your trusted partner in Malaysia for FNIRSI instrumentation and industrial measurement solutions.
 
Reach out to our team today for product inquiries, bulk corporate or educational quotations, or to visit our showroom and service centre in Puchong, Selangor.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026